Filter By:
- Rigid (68)
- Suspension (85)
- Show More Brands
- Show Fewer Brands
Forks
$130.00
The Bridge Club fork is designed around the 27.5 wheel size with tire clearance up to 2.8, but is also capable of running 700c wheel setups with max tire clearance of 47c. It has 51mm I.S. disc caliper mounts and brake line guides as well. It only has the barnacles that matter most to the discerning bike tourist. The fork features upper and lower barrel bosses, one three pack mount on each leg, mid-blade eyelets, and rack mounts on the fork ends.
- Axle-to-crown: 420mm
- Offset: 43
- Steerer: 340mm
- Tire Clearance: 71mm (2.8")
- Weight: 1190g (2.62 lbs)
$90.00
700c Hybrid fork with Cantilever Mounts
- Forged dropouts with eyelets, straight-gauge oval-tapered blades
- Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing
- Welded unicrown construction
- Clearance for 50mm wide fenders (1 1/8-inch)
- Axle to Crown Length: 403mm (1 1/8-inch); 412mm (1 1/8-inch SC); 403mm (1-inch)
- Brake Mount (Fork): Canti Studs
- Color: Black
- Crown Race: 30 (1 1/8-inch, 1 1/8-inch SC); 26 (1-inch)
- Front Axle: 10mm x 100mm
- Material: Steel
- Offset: 50 mm
- S.H.I.S. Stem Clamp Diameter: 28.6 (1 1/8-inch, 1 1/8-inch SC); 25.4 (1-inch)
- Steerer Tube Length: 300mm (1 1/8-inch); 260mm (1 1/8-inch SC); 300mm (1-inch)
- Steerer Type: Straight
- Weight: 975g (1 1/8-inch); 1105g (1 1/8-inch SC); 963g (1-inch)
- Wheel Size: 700c
$650.00
Riding rigid isn’t for everyone, but for those who value functional simplicity, the updated ENVE Mountain Fork delivers.
BOOST (15X110MM)
- Material: Carbon
- Accessory Mounts: Yes
- Weight: 719g with Fender, 676g (w/ clasps)
- Travel Correction: 120mm (Compatible with frames designed around 100mm-140mm Travel Forks)
- Steerer Tube Length: 300mm
- Rake: Adjustable – 44mm, 52mm
- Axle To Crown: 490mm – 44mm Rake Position; 492mm – 52mm Rake Position
- Brake: Disc
- Brake Mount: Post Mount
- Axle Compatibility: 15 x 110mm
- Max Rotor Size: 180mm
- Max Tire Clearance: 29 x 3.0” with Fender
- Crown Race Diameter: 1.5”
- Torque Spec: Steerer Tube: 5.5 Nm
- Torque Spec: Axle: 8 Nm
$435.00
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.7 Carbon Disc Cyclocross Fork. It makes sure you don't have to worry about uncomfortable chatter or vibration while experiencing an astoundingly plush ride. They've accomplished this by using proven technologies like a delightfully stiff and compliant UD carbon fiber construction, not to mention the use of disc brake mounts on their CX forks. It all results in an enhanced riding experience and adds up to performance that you can count on.
- Axle to Crown Length: 392.2mm
- Brake Mount (Fork): Post Mount 140mm
- Front Axle: 10mm x 100mm
- Material: Carbon
- Maximum Tire Clearance (Fork): 48
- Offset: 47mm
- Rotor Size (Fork): 160mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Tube Length (mm): 300mm
- Wheel Size: 700c
$350.00
The Whisky No.7 RD fork is a modern caliper road fork for road bikes with tapered steertubes. Their No.7 RD fork features a standard 9mm x 100mm QR axle. It offers low weight, precise handling, and clearance for 28c tires. This is a perfect upgrade fork for in lieu of a steel or alloy fork, and makes a great replacement fork for existing carbon product.
$375.00
The No.7 Road fork is a thoroughly modern design, compatible with road bikes that utilize tapered steerer tubes. Features include 9mm x 100mm QR dropouts and brake mount for short-reach caliper rim brakes, to easily accommodate standard road wheels. The fork offers low weight, precise handling and tire clearance for up to 700 x 28c tires.
- 9mm x 100mm spacing
- For use with short reach caliper rim brakes
- 700 x 28c max recommended tire size
- ASTM Condition 1 - For use on paved surfaces
- Includes Whisky Parts Co. compression plug
- Axle to Crown Length: 367 mm
- Brake Mount (Fork): Short Reach Caliper (39mm - 49mm)
- Color: Black
- Crown Race: 30
- Defined Color: Black
- Front Axle: 9mm x 100mm
- Material: Carbon
- Offset: 43 mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Type: Straight
- Steerer Tube Length (mm): 300 mm
- Weight: 370 g
- Wheel Size: 700c , 650b
- Maximum Tire Clearance (Fork): 30c
$525.00
The Whisky No.9 CX Flat Mount fork is a lightweight, forward-compatible front-end upgrade, ideal for cyclocross, singletrack, gravel, or commuting. Redesigned, thoroughly tested, and dialed in for rough, off-road riding, it features the flat-mount disc brake standard, easy fender mounts, 12mm thru-axle dropouts, and internal brake routing for a refined, clean design. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for.
- 12mm thru-axle, 100mm spacing
- Designed for flat-mount disc brakes
- Fender eyelets on outside of fork leg for easy mounting
- 700c x 42mm or 650B x 50mm max recommended tire size
- ASTM Condition 3 – For rough off-road riding and jumps less than 24-inches
- Includes thru-axle and Whisky Parts Co. compression plug
$525.00
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on.
- Custom DT RWS Skewer included
- 3.0" max recommended tire size
- Axle to Crown Length: 480mm
- Brake Mount: IS Disc Brake 160mm
- Crown Race: 40
- Defined Color: Black
- Front Axle: 15 x 100mm
- Offset: 51mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Type: Tapered
- Weight: 750 grams
- Wheel Size: 29-inch
$540.00
Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Fat Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough terrain, so you experience an astoundingly plush ride with precise handling. They've accomplished this by using a delightfully stiff and compliant UD carbon fiber construction, a tapered steerer, and a 15 x 150mm thru-axle. It all results in an enhanced riding experience and adds up to performance that you can count on.
- Post style brake mount
- DT RWS Axle included
- UD full carbon construction
- Axle to Crown Length: 480mm
- Brake Mount: Post Mount 160mm
- Crown Race: 40
- Front Axle: 15 x 150mm
- Material: Carbon
- Offset: 51mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Type: 1-1/8 – 1-1/2-inch tapered
- Weight: 750 grams
- Wheel Size: 26-inch
$525.00
Whisky's No.9 RD+ is an all-road fork designed for versatility with abundant tire clearance, up to 700x38c or 650x47c. Hidden and removable fender mounts make this fork all season capable.
- 12mm Thru Axle
- Flat Mount Disc Brake
- Tapered Steerer Tube
- 700x38c/650x47c clearance
$525.00
The Whisky No.9 RD thru-axle fork is designed from the ground up to offer a modern road fork experience. Big tire clearance, flat mount brake capability, and internal cable routing all add up to a clean look and capable performance. Featuring sleek hidden fender mounts, this fork carries through with Whisky’s promise of refined, versatile performance.
- 1-1/4-inch Tapered steerer tube
- 12mm thru-axle, 100mm spacing
- Designed for flat mount disc brakes
- Hidden, removable fender mounts
- 700 x 30c max recommended tire size
- Includes thru axle and Whisky Parts Co. compression plug
$199.00
The Dinner Fork is non-suspension corrected and accommodates 26", 27.5", and 29" wheel sizes. If you want to run fenders alongside an 8 or 24-Pack style rack, this fork can do that. Hell, it relishes it. To give you even more options for carrying miscellaneous items, we put a set of 3-pack mounts on each fork blade, too.
Run it on your current Surly for a thought-provoking new experience, or throw it on a different rig to unlock some off-road capabilities. A truly versatile piece of cutlery, the Dinner Fork features 100% Surly Chromoly steel construction, 51mm IS disc brake mounts, and clearance for tires up to 26 x 3.0", 27.5 x 2.8", or 29 x 2.2".
Specifications:
- Axle-to-crown: 420mm
- Offset: 50mm
- Steerer: 350mm, 1-1/8" straight
- Tire Clearance: 26 x 3.0" (without fenders); 27.5 x 2.8" (with or without fenders); or 29 x 2.2" (without fenders)
- Weight: 2.75 lb.
$175.00
Like its QR cousin, the Disc Trucker Thru-Axle Fork is designed to mount racks and fenders and haul your worldly possessions. It's also got modern touches like dynamo routing, compatibility with flat-mount disc brakes, and three-pack mounts on both fork blades to satisfy your deepest cargo desires. Captured 12mm thru-axles make tool-free removal and installation possible. Offered in 26" and 700c wheel sizes, the Thru-Axle fork clears 26 x 2.1" or 700c x 47mm tires. With a 1-1/8" steerer, it's powder-coated and constructed using the same Chromoly steel as all our other frames and forks. Why? Because we swore a blood oath to steel and we intend to keep it.
Note: The Disc Trucker TA Fork is designed to pair best with second-generation Disc Trucker models—those first released in 2020. Defy this guidance at your own peril.
26 Inch
- Axle-to-crown: 376mm
- Offset: 45mm
- Steerer: 42–54cm frames = 300mm, 1-1/8" straight
- 56–62cm frames = 400mm, 1-1/8" straight
- Tire Clearance: 26 x 2.1" (with or without fenders)
700c
- Axle-to-crown: 390mm
- Offset: 45mm
- Steerer: 56–64cm frames = 350mm, 1-1/8" straight
- Tire Clearance: 700c x 47mm (with or without fenders)
$175.00
The Ice Cream Truck fork is made from 4130 CroMoly steel and is designed for Surly's Ice Cream Truck frame. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It has barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. That's a lot of bosses. 51mm I.S. mounts use front disc spacing.
- Axle-to-crown: 483mm
- Offset: 47mm
- Steerer: 260mm, 1-1/8-inch straight
- Tire Clearance: 26 x 5.25-inch
$130.00
The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. Offered in 26? and 700c wheel sizes, the fork’s new crown provides ample clearance for 700c x 50mm tires, and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube.
- Axle-to-crown: 700c = 390mm
- Offset: 45mm
- Steerer: 700c (56–64cm frames) = 350mm
- Tire Clearance: 700c x 45mm
- Weight: 700c = 2.3 lb uncut
$175.00
This beauty here was designed alongside Surly's Midnight Special frame. In an effort to shed a few grams (it's for a road bike after all), they opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice — don't you think? Like the Midnight Special frame, this fork is equipped with modern road standards like flat mount disc brakes and a 12 x 100mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!).
- 100% CroMoly construction, fully brazed crown
- Mid-blade thru-blade eyelets
- Rack and fender eyelets at the dropout
- 12 x 100mm thru-axle
- Clearance for 27.5 x 2.32 or 700c x 42mm tires
$175.00
This beaut here was designed alongside our Midnight Special Frame. In an effort to shed a few grams (it's for a road bike after all), we opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice—don't you think? Now, we don't throw the phrase "future-proof" around lightly, so we won't use it here either. What we will say is that, like the Midnight Special Frame, this fork is equipped with modern road standards like flat mount disc brakes and a 100mm x 12mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!).
- Axle-to-crown: 400mm
- Steerer: 350mm, 1-1/8" straight
- Tire Clearance: 27.5" x 2.32" or 700c x 42mm (27.5 x 1.95" or 700c x 38mm w/fenders)
- Weight: 1254g
$135.00
The Straggler fork is very much like the Cross-Check fork — it's a lugged and brazed CroMoly fork with room for 700c tires up to 50mm wide. Both feature fender and rack mount eyelets at the dropouts, mid-blade threaded rack mounts and threaded eyelets on the sides of the crown for accessories. Both deliver a resilient ride and are finished in black powdercoat. The Straggler fork is equipped with a 51mm I.S. disc caliper mount and no accommodation for rim brakes.
- Axle-to-crown: 400mm
- Offset: 44mm
- Steerer: 300mm, 1-1/8" straight (42-58cm), 350mm, 1-1/8" straight (60-62cm)
- Tire Clearance: 50mm (w/o fender) Weight: 2.5 lb (1.15kg) uncut
$130.00
The Troll Fork is just like the one that comes with the Troll frame, a 26-inch wheeled fully geared utility bruiser and cruiser. Like all Surly's forks, it's constructed of CroMoly steel. It sports removable rim brake pivots as well as a 51mm disc caliper mount. The Troll Fork is designed to accept a rack while using a disc brake, via through-blade threaded mounts in two places on each fork blade, and it's even got fender eyelets.
- Disc or rim brake compatible
- Compatible with disc brakes and rack simultaneously
- Fits 26-inch wheels with clearance for a 3.0-inch tire
- Steerer Type: Straight 1-1/8-inch
- Sleek powdercoat finish
$175.00
Surly's Wednesday fork is made of the same 4130 CroMoly steel as its frame counterpart. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It features many accessory barnacles (or braze-ons if you prefer to speak in "official" terms) like barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs.
- 15mm x 150mm thru-axle
- Butted and tapered blades
- Barrel bosses at the dropouts and crown
- Mid-blade thru-blade eyelets
- Triple bottle bosses on both fork legs
- Fits tires up to 5.25" wide
- Axle-to-crown: 468mm
- Offset: 47mm
- Steerer: 260mm, 1-1/8-inch straight
- Tire Clearance: 26 x 5.25-inch
- Weight: 1262g
$169.99 - $189.99
Laterally stiff and fine riding steel-lugged cross fork. Features a sloping lugged crown with cutouts on outside tangs, long inside tangs, and an International Standard disc tab.
- Tange Infinity chromoly steel blades and steerer - Rack eyelets for fenders and braze-ons for low-rider panniers
- 1 1/8" threadless steerer
- 350mm long steerer
- 44mm rake
- 400mm axle to crown
- 60mm inside width
- Lugged Cross fork to match Double Cross Cyclocross frames
- Lugged crown with Tange CrMo construction
- Features eyelets for front rack and braze-ons for low-rider panniers
$189.99
- Premium Cyclocross fork with CrMo blades
- 300mm steerer (uncut) 30.0mm race 44mm straight rake fork
- Designed to match the Soma Double Cross disc frame
- Designed for disc brakes, 160mm rotors (International mount)
- Straight blade design with D-shaped cross-section blades
- Tange Infinity CrMo steel
- 350mm 1-1/8" steerer
- 400mm axle to crown
- Two sets of fork-tip eyelets
- Low rider pannier rack eyelets
- 60mm inside width
$289.99
- Tange Infinity CrMo steel fork for 27.5 (650b) or 29 MTB wheels
- Suspension corrected for 100mm travel 29er frames or 120-130mm 650b frames
- Unicrown with straight D-shaped blades International Standard disc mount
- 47mm rake
- Mini Rack Mounts
$259.99
- Unicrown design with Tange Infinity CrMo steel tubing
- Single eyelets pannier rack mounts and mini rack mounts
- Fits 700c x 45mm tires with fenders
- 15x100mm thru axle and International Standard disc brake mount
$209.00
Salsa Cro Moto Grande Fork 29".
- Disc only 29" rigid fork
- Suspension corrected for 80mm travel fork
- Maxle Included
- Axle to Crown Length: 483 mm
- Brake Mount (Fork): IS Disc Brake 160
- Crown Race: 40
- Front Axle: 15mm Thru x 100mm
- Material: Chromoly Steel
- Offset: 45 mm
- Wheel Mount Center Offset (mm): 0
- Steerer Tube Length (mm): 260 mm
- Weight: 1080 g
$599.00
The Firestarter Carbon Fork is Salsa's high-end, rigid bikepacking fork. This sure-tracking platform features a carbon structure and 15mm thru-axle design, and the Three-Pack mounts on the forward portion of each leg allow use of Salsa Anything Cages or extra water bottle cages.
- Axle to Crown Length: 483 mm
- Brake Mount (Fork): Post Mount 160
- Crown Race: 40
- Front Axle: 15mm Thru x 100mm
- Wheel Mount Center Offset (mm): 0
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Type: Tapered
- Steerer Tube Length (mm): 260 mm
- Weight: 620 g
- Wheel Size: 29er, 29+, 700c
- Rotor Size (Fork): 200
- Maximum Tire Clearance (Fork): 3
$599.00
The Firestarter carbon fork is made from high-modulus carbon fiber, built for all-terrain riding. Three-Pack mounts on each leg give you room for water or Anything Cages, and mid-blade mounts accommodate racks for panniers. This fork is light, tough, and ultra-versatile with the capacity to fit a wide range of tire sizes.
- High modulus carbon fiber construction
- Tapered 1-1/8" to 1-1/2" steerer tube
- 160mm minimum rotor size; 180mm maximum rotor size
- Mid-blade mounts for low rider racks
- Compatible with wheel sizes: 27.5+, 29", 29+, 700c
- Dual sets of Three-Pack mounts on each fork leg for Anything Cages or water bottles
- BOOST 110 x 15mm thru axle included
- Front Axle Size: 15 x 135L, TP=1.5, TL=10
- Internal routing for 110 BOOST dynamo hubs
$569.00
The Kingpin Deluxe fork is perfect for fat bike expeditions, keeping you nimble even when fully loaded. Dual Three-Pack mounts on each leg let you attach water bottles or Anything Cages, and mid-blade mounts fit low rider racks for panniers. Or, ditch the gear and hit the trails with an ultra-light and responsive fork.
- High modulus carbon fiber construction
- Tapered 1-1/8" to 1-1/2" steerer tube
- 160 minimum rotor size; 203mm maximum rotor size
- Dual sets of Three-Pack mounts on each fork leg for Anything Cages or water bottles
- Mid-blade mounts for low rider racks
- Internal routing for 150mm spaced dynamo hubs
- Maximum Tire / Rim sizes: 26 x 5", 27.5 x 4.0", 29 x 3.0"
- 150 x 15 mm thru axle included
- Front Axle Size: 15 x 198L, TP=1.5, TL=9
$483.00
With bigger bikes there comes bigger demands. Thankfully, we created the 35 Gold to meet all of them, both in performance and value. Whether you have an E-MTB or MTB, the burly 35 Gold checks the box with our proven DebonAir spring and Motion Control damping. And new this year is an E-MTB-focused option with mounting points for optional full or short fenders. All told, you might wonder how we packed so much quality and performance into such a wallet-friendly package.
Features
- New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (1.8" taper available)
- New graphics are easy to read and make a fresh impact
- Motion Control damping featuring low-speed compression adjustment to lockout
- Highly tunable DebonAir spring offers a consistent feel throughout the travel
- Fits Tires up to 2.8" (without fenders; the use of a full fender will reduce tire clearance)
- Fast Black finished 35mm aluminum upper tubes couple stiffness and lightweight with a premium look
- Offset: 44mm
Page 1 of 6
Next page