Mountain

As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly Chromoly frame, main triangle is double-butted; 1-1/8" threadless Chromoly fork - Rack, fender, and four sets of three-pack mounts - Disc brake-specific, single-position vertical rear dropout makes it less intimidating than other bikes in the category - Clearance for 700 x 47mm (with or without fenders) or 27.5 x 2.8" tires (27.5 x 2.6" with fenders)

The version 2.0 of the Riff offers practical updates in features and geometry without going all-in with progressive geometry that almost everyone in chasing. We wanted to keep this frame a hardtail that's great for bike packing and familiar-feeling on long days in the saddle on rolling terrain. There is a slightly steeper seat angle for more efficient climbing and shorter seat tubes to benefit dropper posts. Tough Broski Sliding Dropouts allow you to run single-speed, geared or even hub gears. Rear hub spacing in updated to Boost 148 . A modified chainstay allows fitting even some double cranks with “plus size” 2.8? wide. - ED coating inside frame and under the paint increase rust resistance - Boost 148mm rear hub spacing - Geometry is optimized for 120mm forks. Will work well with a 100mm fork, too. - Tange Prestige heat-treated butted CrMo steel; butted CrMo rear end - ISO disc brake tabs - IRD Broski Sliding Dropouts - S-bend seat stays and chainstays - Rear rack and fender eyelets - Dropper post cable routing runs on downtube and inside the seat tube - 34.9mm seat collar(not included), 400mm post recommended - CNC-machined 44mm headtube: Will fit 1-1/8" steerers with a ZeroStack 44 headset or fit tapered steerers with a ZS44 upper assembly and external cup (EC44) lower assembly - Recommended tire size: 27.5 x 1.95" ‚Äi 2.8" - Only the Large size frame comes with bottle mounts on the seat tube - 5.7 lbs (XS)

Timberjack is Salsa's aggressive trail hardtail. Its progressive trail geometry is stable on descents and technical sections, while the Alternator 2.0 dropouts allow for adjustable chainstay length to dial in ride characteristics. Ample accessory mounts and dual wheel size compatibility add more versatility to the package, making Timberjack a well-rounded ripper that likes to party.

So here it is. The Rhythm is back. Only this time it moves to your beat. The NEW Rhythm is a 26” wheel aluminium JUMP/PUMP/4X/PLAY bike frame, built for big airs, endless laps, and elbow to elbow antics. - 26" wheeled aluminum JUMP/PUMP/4X/PLAY frame built for big airs, endless laps, and elbow to elbow antics - 6061 T6 aluminum alloy frameset - Two lengths available - Interchangeable dropouts: 12x142mm geared or 135x10mm single speed (DROPOUTS NOT INCLUDED WITH FRAME) - Sliding dropout system for chain tensioning and adjusting chainstay length - Compatible with 100-140mm forks - Fits tires up to 26x2.5" - PM 160mm disc brake mounts - 34.9mm seat clamp and additional stickers included

The cult favorite continues. The Honzo ST frame is the bike you'll find under a messenger, under that old-school soul ripper, or under the rider who really wants to build something beautiful and custom. A 66-degree headtube is ideal for all kinds of tricky, steep terrain, and the short seat tube allows for longer dropper posts. As always, the Honzo ST frame features adjustable dropouts so you can run your favorite drivetrain without any issues. FEATURES KONA CROMOLY: Very few materials offer as much shock absorption, durability, and supple-ride characteristics as steel. We've never strayed from cycling's original material and have worked tirelessly to adapt, refine and innovate Kona Cromoly framesets as rider demands continue to evolve. INTERNAL HEADSET: Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. TAPERED HEAD TUBE: More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it's needed. TUBELESS COMPATIBLE RIMS: Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems. 12x148mm AXLE: 12x142mm, 12x148 and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted.

We all remember our first mountain bike. For many of us it was a bike like the Lana’i. Affordable enough not to feel too risky but stocked with components that give you the freedom to explore off-road. The Lana’i features integrated shifters and brake levers to streamline the cockpit and is now available in three wheel sizes: 26" for size XS, 27.5" for S and M, and 29" for L and XL. With an 8-speed drivetrain, grippy disc brakes and a 100mm travel fork, the Lana’i is the perfect way to taste what real singletrack riding has to offer.