Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Surly

Surly Bridge Club Frameset
$525.00
Bridge Club is a highly versatile touring bike that perfectly hits the sweet spot spanning on- and off-road excursions. Bridge Club is for those multi-surface outings — planned or unplanned. We've all run out the clock on a dirt tour and had to add in some paved shortcuts. Conversely, when you’re feeling a little zesty on your next road tour, Bridge Club is ready for reroutes through the woods. Some people hear "bike touring" and immediately think of long-forgotten stretches of highway, small-town oddities, and roadside attractions. Some instantly recall desolate stretches of desert dirt roads or lush green forest trails. With Bridge Club, you can have your dessert and eat it too! - Ultra-focused on simplicity, it only has the barnacles that matter most to the discerning bike tourist - Two build kit options: Pavement (700c) and Off-Road (27.5-inch) - Run racks and panniers, framebags, or all of the above - Disc brake-specific, single position, vertical rear dropout makes it less intimidating than other bikes in the category - Clearance for 700 x 47mm tires (with or without fenders), 27.5 x 2.80 tires (27.5 x 2.60 with fenders), and 26 x 3.0 tires (26 x 2.80 with fenders)
Surly Cross-Check Frameset
$525.00
There is no such thing as one bike that can do it all, but the Cross-Check comes mighty close. It's a cyclocross bike by design, but don’t be fooled into thinking that it has only one purpose. This jack-of-all-trades will do just as well getting you across the country as it does getting you across town. At home on the road, on trails, and on gravel, the Cross-Check'll fit pretty big tires, or smaller ones if you like. It can be built as a geared bike, a singlespeed, or a fixed-gear. The Cross-Check’s frame is engineered to supply a comfortable but lively ride. The tubing is CroMoly steel, high quality, custom-drawn, and built to our specifications. It's designed to work with components of popular sizes, meaning you can find both new and old parts to hang on this frame. It will accommodate a wide range of crank types and chainring sizes. It's got accommodations for racks and fenders (front and rear) and, because of its ample tire clearance, you can outfit it to suit where and how you will use it. There's a reason the Cross-Check has remained popular after all these years. The frame is comfy, tough as nails, and super versatile. Surly continues to hear from people for whom the Cross-Check has long been their go-to bike simply because it performs so astonishingly well on any surface.
Surly Long Haul Trucker Frameset
$515.00 - $525.00
Travel to the ends of the earth on Surly's Long Haul Trucker! Surly's chromoly frameset offers a stable, smooth ride — even when carrying a load — and it's designed with pannier clearance so you can bring along all your gear! There are also cantilever-brake posts and braze-ons for mounting everything from bottle cages and fenders, to front and rear racks (standard or low-rider). Load your Long Haul up, hit the road, and see the world. - Fender eyelets, pump peg, downtube lever bosses, three sets of bottle cage bosses, rear housing stop for canti brakes - 4130 chromoly lugged and brazed fork; proprietary sloping crown with threaded eyelets in four locations: dual dropout, mid-blade, and a pair drilled right into the fork crown - Massive chainring clearance; use pretty much anything: 42/53t double, 38/52/56t triple - 100% Surly 4130 chromoly steel frame; main triangle double-butted - 26-inch: Clearance for 2.1" with or without fenders; - 700c: Clearance for 42mm with fenders, 45mm without fenders - Individual tire and rim combos affect tire clearance - Frame is ED Coated for increased life expectancy
Surly Long Haul Trucker Frameset (26-inch wheels)
$525.00
Travel to the ends of the earth on Surly's Long Haul Trucker! Surly's chromoly frameset offers a stable, smooth ride — even when carrying a load — and it's designed with pannier clearance so you can bring along all your gear! There are also cantilever-brake posts and braze-ons for mounting everything from bottle cages and fenders, to front and rear racks (standard or low-rider). Load your Long Haul up, hit the road, and see the world. - Fender eyelets, pump peg, downtube lever bosses, three sets of bottle cage bosses, rear housing stop for canti brakes - 4130 chromoly lugged and brazed fork; proprietary sloping crown with threaded eyelets in four locations: dual dropout, mid-blade, and a pair drilled right into the fork crown - Massive chainring clearance; use pretty much anything: 42/53t double, 38/52/56t triple - 100% Surly 4130 chromoly steel frame; main triangle double-butted - Clearance for a 26 x 2.1" tire with or without fenders - Frame is ED Coated for increased life expectancy
Surly Pack Rat Frameset
$525.00
The Surly Pack Rat is designed around porteur-style racks and front-loading optimization, with a front cargo-specific design to eliminate steering issues. The fork features internal routing for generator hubs and rear frame dropouts to accommodate multiple drivetrain configurations. It’s an ideal choice for loaded commutes and bike trips with a lighter load, but also rides great when unloaded. - 100% Surly 4130 Chromoly frame, main triangle is double-butted; 1-1/8" threadless brazed Chromoly fork - Bosses front and rear for cantilever or linear-pull brakes, rack and fender eyelets at the dropouts, eyelets at the crown, and fully threaded through-blade fork eyelets for a front rack - Semi-horizontal dropouts with a derailleur hanger for geared or singlespeed drivetrains and/or wheelbase adjustability
Surly Pack Rat Frameset
$525.00
The Pack Rat is designed around porteur-style racks and front-loading optimization, with a front cargo-specific design to eliminate steering issues. The fork features internal routing for generator hubs and rear frame dropouts to accommodate multiple drivetrain configurations. It's an ideal choice for loaded commutes and bike trips with a lighter load, but also rides great when unloaded. - 26-inch Wheel Size has room for tires up to 26 x 2.0, 650B Wheel Size has room for tire up to 650b x 48mm - 100% Surly 4130 Chromoly frame, main triangle is double-butted; 1-1/8-inch threadless brazed Chromoly fork - Bosses front and rear for cantilever or linear-pull brakes, rack and fender eyelets at the dropouts, eyelets at the crown, and fully threaded through-blade fork eyelets for a front rack - Semi-horizontal dropouts with a derailleur hanger for geared or singlespeed drivetrains and/or wheelbase adjustability
Surly Cross Check Frameset
$500.00
Cross-Check is a tough-as-nails, super-versatile road bike that performs astonishingly well on any surface. There is no such thing as one bike that can do it all, but Cross-Check comes pretty damn close. It's a dyed-in-the-wool commuter and utility rig. It was a gravel crusher long before "gravel bikes" existed. Some people have even raced cyclocross on it. Though, we don't necessarily condone that behavior. Cross-Check was the first complete bike we ever offered. Since then, people have modified them hundreds of different ways to suit their riding styles and preferences. There’s a reason that nearly every person who has ever worked for Surly has owned one. - Semi-horizontal dropouts for singlespeed compatibility and wheelbase adjustability - Gnot-Rite dropout spacing allows installation of 130 or 135mm hubs - Accommodations for front and rear racks and fenders - Clearance for 700 x 42mm tires with or without fenders
Surly Steamroller Frameset
$500.00
Whether you're commuting to work, turning left on the track, or just cruising the city streets, Surly's Steamroller is your rig of choice! Its tough chromoly frame and fork ride smooth like butter and deftly maneuver the pothole-strewn pavement of the urban jungle. Its agility comes from a geometry that leans more towards the road than the track. And with Fatties Fit Fine tire clearance, you can run comfy wide tires or even knobby 'cross rubber.
Surly Big Dummy Cargo Kit
$310.00
The Dummy Cargo Kit includes a pair of Dummy Rails, a pair of Dummy Bags, and a Dummy Deck, plus all the hardware you'll need to install everything and get haulin'. Solidly constructed from high-quality materials and chock-full of little details that ensure their usability, the kit works with any system using the Xtracycle cargo bike design, including of course Surly's own Big Dummy. In fact, this is the stuff they now spec on the Big Dummy complete bike. - 840d nylon exterior provides abrasion-resistance, while the tarp liner keeps cargo dry - Dummy Bags feature a roll-up rain flap, an expandable cargo flap, and a water-resistant inner pocket with an optional divider - Stainless steel drainage and cinch cord grommets, replaceable cinch cords, and replaceable wear patches at the disc caliper and derailleur contact points
Surly Trailer Hitch/Yolk Assembly (trailer sold separately)
$300.00
Surly's Trailer Hitch/Yolk Assembly is the correct hitch for Surly's Bill and Ted Trailers (sold separately). This fine chromoly hitch securely and quickly attaches to your bike using the included proprietary quick-release skewer. Or, if you have a bolt-on rear wheel, you just bolt the hitch onto your rear axle. The hitch fits most bicycles whether they feature full suspension, disc brakes, rear racks and fenders, or you name it. And it works with bicycles with wheels as small as 20 inches and as large as 29 inches, while always keeping the trailer bed level with the ground. The hitch also adjusts to accommodate rear hub widths from 120 to 145mm and allows you to align the centerline of the trailer on the centerline of the bike for easy pulling. Maybe best, the hitch lets you remove the trailer quickly and easily when you don't need it. Plus, by putting hitches on all your favorite bikes you can easily move the trailer between bikes!
Surly Dummy Bags
$275.00
Surly Dummy Bags are designed to work with the Big Dummy cargo bike and other cargo bikes using the Xtracycle Longtail Standard. They were designed to provide the functionality and reliability you expect from Surly products. All materials, from fabric to thread to hardware, were chosen specifically for their given applications — as light or as heavy as they need to be to survive the battle against the elements and daily wear and tear. The 840d nylon exterior provides abrasion-resistance, while the tarp liner keeps cargo dry. Dummy Bags feature a roll-up rain flap, an expandable cargo flap, and a water-resistant inner pocket with an optional divider. Surly also included little details like stainless steel drainage and cinch cord grommets, replaceable cinch cords, and replaceable wear patches at the disc caliper and derailleur contact points. Dummy Bags work best with Surly Dummy Rails and Dummy Deck. Each piece will work with older parts — your Dummy Bags will play well with Xtracycle rails, for example — but fit and use of all features will not be ideal.
Surly O.D. Crank (PressFit BB)
$250.00
Surly designed the O.D. crankset to offer frame and tire clearance while maintaining a reasonable q-factor (pedal stance). Maximizing the distance between the chain and the tire is important on fat bikes such as the Pugsley and Moonlander, or if you're running really big tires and rims on some other bike (like our new Krampus, for example). With normal cranks, wide tires on wide rims can rub the chain when in the lowest, or farthest-inboard, gear combinations. Like the MWOD crank, the O.D. crank doesn't just add a longer spindle to move the rings outboard. Rather, it does away with the big ring of a standard triple and moves the middle and granny rings to the outer and middle positions. This effectively moves the rings outboard without moving the arms outboard too. The O.D. is a simple, dedicated version of this idea. Neato! Forged of 7000 series T6 aluminum, the O.D. crank is a 2-piece, with spindle embedded inextricably in the drive side arm. It's a dedicated 2x, although its chainline is outboard a bit compared to standard mountain cranks, and it is 9 and 10 speed compatible. The 132mm, PF41 bottom bracket O.D. crank is what goes on the Ice Cream Truck bikes, so if you've got that setup, that's your crank. Surly also offers 33t and 20t rings separately. These chain rings are designed to shift best in specific combinations….change to a 39/22t, for example, and your shifting will suffer. The bearings on which they spin are also worth mentioning: Surly upgraded the bearings on these and the Mr. Whirly and MWOD cranksets to aftermarket Enduro bearings with double labyrinth seals, meaning they actively shed and stay clean of dust, muck, and grime, even in wet and muddy climates.
Surly Midnight Special 650b Fork
$185.00
This beauty here was designed alongside Surly's Midnight Special frame. In an effort to shed a few grams (it's for a road bike after all), they opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice — don't you think? Like the Midnight Special frame, this fork is equipped with modern road standards like flat mount disc brakes and a 12 x 100mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets - Rack and fender eyelets at the dropout - 12 x 100mm thru-axle - Clearance for 27.5 x 2.32 or 700c x 42mm tires
Surly Straggle-Check Frame Bag
$185.00
Dubbed 'Straggle-Check' frame bags, these bags are designed to fit both 700c and 650b Straggler and 700c Cross Check frames. Size up one size on your bag if you've got a 650b Straggler frame and voila, it fits. These are handmade by Revelate Designs in the U.S., made of Dimension Polyant VX 21 polyurethane coated fabric. It's durable, rip resistant, tightly woven and laminated to make it highly water resistant but not fully waterproof…. Revelate advises using stuff sacks inside (such as the one in which our bags are packaged) if you risk riding in extended downpours or underwater. Surly's Straggle-Check frame bags (as well as their mountain bags) are now using a ladder strap system, which allows greater flexibility in how you attach the bag to your frame. The ladder straps let you customize the fit and placement of the mounting straps so if you have some weird contraption clamped to your frame tubes like a chain keeper, cable pulley, or some trinket grandma gave you, it won't interfere with the mounting straps on the frame bag. They're also including foam bumpers for the mounting straps to minimize thread abrasion to the bag and attachment points Quality YKK brand water resistant zippers – with an improved, water resistant zipper 'garage' – control compartment access and help keep the weather out. Zippers are sewn with a stretch panel to relieve stress on the zipper as well. Stress even kills zippers. The large main compartment has a flexible divider inside, and there's a hydration port to make sure your whistle stays wet. There's also a compartment suitable for smaller items you'll access relatively often, like your map, phone, hard boiled eggs, uncontained pudding, marbles for playing marbles, your dugout, that ring you found that makes you disappear when you put it on, or whathaveyou. Frame bags such as this are light and reasonably voluminous. They are stable because they center weight low between your wheels and body, and they go places where racks and panniers are often troublesome, like singletrack. Note: due to the rough texture of the mounting straps, prolonged use may lead to scratched or worn paint. If you're worried about keeping everything looking pristine you probably ought to look for some other type of bag, or figure a way to protect the paint, such as duct tape, or tatting a top tube doily - for example.
Surly Big Fat Dummy Fork
$175.00
The Big Fat Dummy fork is made of the same 4130 Chromoly steel as its frame counterpart and accepts tires up to 26 x 5.25. - 15mm x 150mm thru-axle - Butted and tapered blades - Barrel bosses at the dropouts and crown - Mid-blade thru-blade eyelets - Triple bottle bosses on both fork legs
Surly Ice Cream Truck 150 Fork
$175.00
The Ice Cream Truck fork is made from 4130 CroMoly steel and is designed for Surly's Ice Cream Truck frame. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It has barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. That's a lot of bosses. 51mm I.S. mounts use front disc spacing. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm, 1-1/8-inch straight - Tire Clearance: 26 x 5.25-inch
Surly Krampus 110 Fork
$175.00
Designed around Surly's updated Krampus frame (but also employed on the updated Karate Monkey frames as well), this fork has 15mm thru-axle dropouts spaced at 110mm and clearance for up to a 29 x 3.0-inch tire. To accommodate such big tires it's got a longer axle-to-crown measurement than our Ogre or Karate Monkey forks, making it a perfect rigid fork option for lots of 29ers out there. The Krampus fork's blades were designed and manufactured specifically to play well with the unique forces such a long fork with big tires will encounter, and the steer tube is standard 1-1/8-inch threadless. It has line guides for a disc brake line as well as thru-blade eyelets and Three-Pack bosses on both fork legs. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm - Tire Clearance: 29 x 3.0-inch - Weight: 1180g uncut
Surly Wednesday Fork
$175.00
Surly's Wednesday fork is made of the same 4130 CroMoly steel as its frame counterpart. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It features many accessory barnacles (or braze-ons if you prefer to speak in “official" terms) like barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. - Axle-to-crown: 468mm - Offset: 47mm - Steerer: 260mm, 1-1/8-inch straight - Tire Clearance: 26 x 5.25-inch - Weight: 1262g
Surly Mountain Frame Bag
$170.00
Surly mountain frame bags are designed specifically to fit in the main triangle of your Surly frame. Their mountain bags are now using a ladder strap system, which allows greater flexibility in how you attach the bag to your frame. The ladder straps let you customize the fit and placement of the mounting straps so if you have some weird contraption clamped to your frame tubes like a chain keeper, cable pulley or some trinket grandma gave you, you know it won't interfere with the mounting straps on the frame bag. Handmade by Revelate Designs in the U.S., these things are made of Dimension Polyant VX 42, a synthetic sailcloth. This stuff is durable, rip resistant, and tightly woven and laminated to make it highly water resistant (but not fully waterproof… Revelate advises using drybags inside if you risk riding in extended downpours or underwater). Compartment access is controlled by quality YKK brand water resistant zippers. The large main compartment has a flexible divider inside, and there's a hidden pocket too. There's also a compartment suitable for smaller items you''ll access relatively often, like your map, phone, hard boiled eggs, uncontained pudding, marbles for playing marbles, your dugout, that ring you found that makes you disappear when you put it on, or whathaveyou. Frame bags such as this are becoming more and more popular. They're light, reasonably voluminous, stable because they center weight low between your wheels and body, and they go places where racks and panniers are often troublesome, like singletrack. Surly offers them in ten sizes for many of their off-road frames. Buy the bag that matches the size of your frame based on the handy sizing chart. Note: due to the rough texture of the mounting straps, prolonged use may lead to scratched or worn paint. Those worried about keeping their frame looking pristine should immediately look for some other type of bag, or figure a way to protect their paint, such as duct tape. Or tatting a top tube doily. For example.
Surly Rear Disc Rack
$160.00
Surly's burly line of tubular chromoly steel racks have been used on expeditions all over this planet for years.This Surly Rear Disc Rack is made of tubular chromoly steel and is specifically designed to fit frames with seatstay-mounted disc brakes like the Straggler (650B and 700c), Krampus, and Karate Monkey. - Tubular chromoly rack, stainless-steel hardware - Height-adjustable to accommodate 26-29" wheels - Hardware housed in reusable Surly Tool Bag
Surly 24-Pack Rack
$150.00
If you like to ride useful bikes, racks make a lot of sense. Surly's 24-Pack Rack ups the useable cargo space on your bike, providing more real estate for more stuff: more beer, more food, more random bits from the hardware store, more whatever. It’s manufactured from cromoly tubing and uses stainless steel hardware. And it offers height adjustability, so you can keep your cargo close to the ground and stable. It has plenty of braze-ons, too, so you can customize how you secure your cargo…or just light your bike up like the space station. The 24-Pack Rack attaches to most forks that feature mid-blade and crown eyelets. It gives you a stable, rigid assembly upon which you might place your burden. No one likes a sweaty back and a sore bottom, so take your stuff out of that messenger bag and put it on the front of your bike. The 24-Pack Rack is rated to carry 30lbs (13.6kg) and comes in black or silver.
Surly Front Rack
$140.00
Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g
Surly 8-Pack Rack
$125.00
Most of you don’t need the cargo capacity to land a helicopter on your rack. Sometimes, all you want to do is grab a sixer from the beer store on the way home, or pick up a nice bouquet of flowers. For whatever the situation dictates, Surly offers the 8-Pack Rack. Made from the same tubular cromoly steel as their front and rear touring racks, the 8-Pack Rack is a solid pedestal upon which you may rest a handlebar bag, grocery bag, minaudiere, satchel…or whatever you use to carry your bowling ball around. The 8-Pack Rack attaches to most forks with mid-blade and crown eyelets. It uses stainless steel hardware and has the characteristic durability, versatility, and repairability all Surly products are known for. The 8-Pack Rack has lots of barrel braze-ons, so you can customize your cargo tie-downs…or just bolt on as many lights as you can possibly find. It’s rated to carry up to 30lbs (13.6 kg) and comes in black or silver.
Surly Bridge Club Fork
$125.00
The Bridge Club fork is designed around the 27.5 wheel size with tire clearance up to 2.8, but is also capable of running 700c wheel setups with max tire clearance of 47c. It has 51mm I.S. disc caliper mounts and brake line guides as well. It only has the barnacles that matter most to the discerning bike tourist. The fork features upper and lower barrel bosses, one three pack mount on each leg, mid-blade eyelets, and rack mounts on the fork ends. - Axle-to-crown: 420mm - Offset: 43 - Steerer: 340mm - Tire Clearance: 71mm (2.8") - Weight: 1190g (2.62 lbs)
Surly CroMoly Rack (Front) 2.0
$125.00
This expedition-worthy rack is made from 4130 chromoly, so it's tough, light and easily repairable in the field. It's also height-adjustable, so you can get your center of gravity as low as possible for a stable ride. The provided stainless steel hardware enables you to attach your rack to most rigid 26-inch and 700c forks equipped with caliper or cantilever brakes. It hauls up to 70 pounds of gear and is powder-coated to protect it from the elements.
Surly Cross-Check Fork
$125.00
Our lugged and brazed Cross-Check fork has room for 700c x 45mm tires and fenders. It’s made from 4130 CroMoly steel and features fender eyelets at the dropouts, cantilever brake pivots, and now has through-leg mid-blade eyelets for mounting a rack. The eyelets are threaded 5 x 1mm and located 165mm up from the axle. Finish is powdercoat. - Axle-to-crown: 400mm - Offset: 44mm - Steerer: 300mm - Tire Clearance: 700c x 45mm - Weight: 2.3 lb (1.0kg) uncut
Surly ECR Fork
$125.00
The ECR fork is much like the Ogre fork. Both are CroMoly 29er forks. Both work with frames designed for 80mm-travel suspension forks. Both feature 51mm I.S. disc caliper mounts, brake line guides, accommodations for a rack and fender, and 2 sets of cage mounts (one on each leg) that let you mount large size or standard water bottle cages. Both are designed to run just about any combination of parts and accessories you'd want on a fork and are finished in durable black powdercoat. The only real differences are 1) ECR is disc brake only, and 2) ECR's offset is 47mm, 5mm more than Ogre's. - Axle-to-crown: 468mm - Offset: 47mm - Steerer: 260mm, 1-1/8" straight - Tire Clearance: 29 x 3.0" - Weight: 3.1 lb (1.4kg) uncut
Surly Long Haul Trucker Fork (26-inch)
$125.00
The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. The fork’s new crown provides ample clearance for 26 x 2.1 tires and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube. - Axle-to-crown: 26" = 376mm - Offset: 45mm - Steerer: 26" (42–54cm frames) = 300mm; 26" (56–62cm frames) = 400mm - Tire Clearance: 26 x 2.1" - Weight: 26" = 2.1 lb (0.97kg) uncut
Surly Long Haul Trucker Fork (700c)
$125.00
The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. Offered in 26? and 700c wheel sizes, the fork’s new crown provides ample clearance for 700c x 50mm tires, and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube. - Axle-to-crown: 700c = 390mm - Offset: 45mm - Steerer: 700c (56–64cm frames) = 350mm - Tire Clearance: 700c x 45mm - Weight: 700c = 2.3 lb uncut
Surly Ogre 29/27.5+ Fork Non-Suspension Corrected
$125.00
The Ogre fork is non-suspension corrected and will run 29-inch as well as 27.5-inch tire options. Made of 4130 CroMoly, it's got 51mm IS disc mounts, removable cantilever pivots, brake-line guides, low-blade threaded barrel bosses and mid-blade eyelets for a rack. This fork is designed to run disc brakes, fenders and a rack simultaneously. It's got two sets of triple bottle mounts, one on each leg. - Axle to Crown Length: 447 mm - Brake Mount: Canti studs, IS Disc Brake 160 - Crown Race: 30 - Front Axle: 9mm x 100mm - Material: Chromoly Steel - Offset: 43 mm - Steerer Type: Straight 1-1/8-inch - Wheel Size: 29-inch, 27.5+ - Powdercoat finish
Surly Pack Rat 26-inch Fork
$125.00
Designed with the Surly Pack Rat frame, this fork is built with front cargo carrying in mind. It’s made from 4130 CroMoly steel and features mid-blade eyelets for mounting a Surly 8- or 24-pack rack (among others). This lugged and brazed fork also includes fender eyelets at the dropouts, internal routing for generator hubs, and cantilever brake pivots. - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets for mounting a front rack - Fender eyelets at the dropout - Internal routing for generator hubs - Cantilever/Linear Pull brake mounts - 9mm x 100mm quick-release dropouts - Max tire clearance: 26 x 2.0"
Surly Pack Rat 650B Fork
$125.00
Designed with the Surly Pack Rat frame, this fork is built with front cargo caryying in mind. It’s made from 4130 CroMoly steel and features mid-blade eyelets for mounting a Surly 8- or 24-pack rack (among others). This lugged and brazed fork also includes fender eyelets at the dropouts, internal routing for generator hubs, and cantilever brake pivots. - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets for mounting a front rack - Fender eyelets at the dropout - Internal routing for generator hubs - Cantilever/Linear Pull brake mounts - 9mm x 100mm quick-release dropouts - Max tire clearance: 650B x 48c
Surly Pugsley Fork Non-Offset
$125.00
This fork will accept 26-inch tires up to 3.8-inch wide with plenty of clearance, even using rims as wide as 82mm. Surly's 100mm spaced fat forks let you build a front wheel using standard 100mm front hubs with zero offset. This spacing opens up all sorts of options for front hubs including dynamo hubs and other hard to find goodies that generally only come in 100mm spacing. Internally-butted tapered straight legs. 51mm I.S. disc brake caliper mount uses standard front adapter. Chromoly steel. Available in black. - Axle-To-Crown: 447mm - Offset: 43mm - Steerer: 260mm 1-1/8" straight - Tire Clearance: 26 x 3.8" (on rims up to 82mm wide). Getting 4" tires through 100mm spaced dropouts can be a little tricky. Be patient.
Surly Straggler 650b Fork
$125.00
Replacement disc compatible forks for the Surly Straggler. - Tire Clearance: 50mm (w/o fender) - Weight: 2.4 lb (1.1kg) uncut - Axle-to-crown: 380mm - Offset: 44mm - Steerer: 360mm, 1-1/8" straight
Surly Straggler 700c Fork
$125.00
The Straggler fork is very much like the Cross-Check fork — t's a lugged and brazed CroMoly fork with room for 700c tires up to 50mm wide. Both feature fender and rack mount eyelets at the dropouts, mid-blade threaded rack mounts and threaded eyelets on the sides of the crown for accessories. Both deliver a resilient ride and are finished in black powdercoat. The Straggler fork is equipped with a 51mm I.S. disc caliper mount and no accommodation for rim brakes. - Axle-to-crown: 400mm - Offset: 44mm - Steerer: 300mm, 1-1/8" straight (42-58cm), 350mm, 1-1/8" straight (60-62cm) - Tire Clearance: 50mm (w/o fender) Weight: 2.5 lb (1.15kg) uncut
Surly Porteur House
$120.00
The Porteur House is made to fit Surly's 24 Pack Rack. It uses a system of eight Velcro straps to secure itself to the rack. The strap system is designed such that it will interface with many porteur-style racks with similar platform dimensions. The Porteur House bag is made from durable 1050 Nylon Canvas with polyurethane coating for protection from the elements. It uses a stiff insert in the bottom of the bag to give it shape and keep your stuff protected from wheel-spray. We also include three urethane coated, water-resistant nylon stuff sacks for an added layer of protection in each compartment; 2 front pockets and the large main compartment. The Porteur House bag has two accessory pockets on the front of the bag, each with a light loop to keep you visible and safe. Its main compartment is difficult to describe without using the word huge, and the roll-top closure keeps the rain out and your stuff in. The Porteur House also comes with a shoulder strap so you can take the bag off the bike and use it when you're at the Hallmark store shopping for your little figurines and keepsakes. If you're the kind of person who likes accessories that make your bike infinitely more useful, the Porteur House is for you. With dimensions sitting at 400x270x450mm, fully extended, this bag will be a monolithic figurehead of two-wheeled practicality perched on the front of your bike. The strap system keeps it planted to your rack, and it's more than large enough to bring home the bacon – literally – so go to the store and get some bacon.
Surly Pugsley Fork Offset
$116.00
This fork will accept 26-inch tires up to 3.8-inch with plenty of clearance, even using rims as wide as 82mm. It requires a wheel built offset to match the Pugsly frame (17.5mm). Since the hub spacing is 135mm (mountain rear) this is a useful feature, especially in remote places and extreme temperatures or conditions. Should your freehub seize due to cold, invasive grit or other reasons, you can swap wheels and keep moving. Internally butted tapered straight legs. 51mm I.S. disc brake caliper mount uses standard front adapter. Chromoly. - Axle-To-Crown: 447mm - Offset: 43mm - Steerer: 260mm 1-1/8" straight - Tire Clearance: 26 x 3.8" (on rims up to 82mm wide)
Surly Krampus Fork
$110.00
Designed for Surly's Krampus frame, this fork has quick-release dropouts spaced at 100mm and clearance for a 3-inch tire on a 50mm rim. To accommodate such big tires it's got a longer axle-to-crown measurement than the Ogre or Karate Monkey forks, making it a perfect rigid fork option for lots of 29ers out there. The Krampus fork's blades were designed and manufactured specifically to play well with the unique forces such a long fork with big tires will encounter, and the steer tube is standard 1-1/8-inch threadless. It has line guides for a disc brake line as well as thru-blade eyelets and Three-Pack bosses on both fork legs. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm - Tire Clearance: 29 x 3" - Weight: 1133g uncut
Surly Petite Porteur House Bag
$100.00
From the people who brought you the Porteur House (Surly) comes a newer, svelter method of carrying things on your bike: the Petite Porteur House. Designed to fit both our 8 and 24 pack racks, the Petite Portuer House uses a system of six Velcro straps to securely snug it to the rack. The strap system is designed such that it will interface with many porteur-style racks with similar platform dimensions. The Petite Porteur House bag is made from durable 1050 Nylon Canvas with a polyurethane coating for protection from the elements. It uses a stiff insert in the bottom of the bag to give it shape and help keep wheel spray off your stuff. We also include four urethane coated, water-resistant nylon stuff sacks for an added layer of protection in each compartment. We've also included a handy light loop to help keep you visible and safe. Surly's measuring stick says its 270 x 160 x 400mm so it has plenty of space for your ride necessities, tools, cool rocks, and whatever other bobbles you might feel inclined to bring with you.
Surly Moloko Bar
$95.00
If variety is the spice of life, then the Moloko bar oozes umami at every bend. It offers a multitude of hand positions to keep you comfortable and in control over the course of a long day riding over varied terrain. It also has plenty of spots to mount your various accessories. Dangle a handlebar bag from it, strap some lights to it, throw a GPS on it (if that's your thing), and ride all day. It comes in a standard width of 735mm but if 685mm is more your style, don't you worry. Surly added cut marks so you can easily make it so. - Material: CroMoly steel - Clamp diameter: 31.8mm - Width: 735mm; Cut marks for 685mm - Rise: 0 - Sweep Angle: 34 degrees - Weight: 709g - Color: E.D. coated Black
Surly Big Dummy Deck
$70.00
Surly's Dummy Deck provides a light, durable platform for cargo bikes, built to Xtracycle's Longtail standard — including the Big Dummy, of course. The Dummy Deck is stamped from 4mm-thick aluminum, chosen for its strength, durability, and recyclability, and it bolts directly to Surly Dummy Rails to stiffen and stabilize the whole system (it's also compatible with Xtracycle V-racks by using Xtracycle's SuperHooks). It features cut-outs for routing straps and cordage, a mounting hole for a rear light bracket, accessory-mounting holes, and countersunk holes for SuperHook hardware.
Surly Dummy Rails
$70.00
Dummy Rails support Dummy Bags on your Big Dummy cargo bike, and Surly's Dummy Deck bolts directly to them, stiffening the whole system for a more stable load. Dummy Rails are made of light, strong aluminum and were designed in conjunction with the Dummy Deck and Dummy Bags; each component works best when used with the others. Like all Surly products, they've built in lots of useful details. For example, the deck-attachment bosses stick up from the rails to create space between the deck and rails, providing windows to route tie-down straps and cordage; and threaded bottle cage bosses located at the rear of each rail provide mounting locations for accessories: bottle cages of course, or lights, cameras, pumps, flags, horns, light saber scabbards, disco balls, spittoons, cornucopias, etc. Dummy Rails will work with cargo frames (including the Surly Big Dummy) built around Xtracycle's longtail standards.
Surly Ultra New Rear Hub (120mm)
$70.00
Track stars and fixed-gear converts love Surly's Ultra New Track Rear Hub! This gorgeous hunk of aluminum boasts reliable sealed bearings, and your choice of fixed/fixed or fixed/free gearing. Plus, this hub's 120mm width fits most track frames and the flex-free solid axle is forged from rugged chromoly.
Surly Knard Tire (29-inch)
$65.00
Surly's Knard is a 29 x 3-inch wide tire with the perfect tread for maximum traction plus low rolling resistance. It's designed for Surly's 50mm-wide Rabbit Hole rim (sold separately), and it will also play nice on rims down to about 35mm wide. But, your frame must have the clearance, Clarence.
Surly Moloko Handlebar Bag
$60.00
The Moloko Adjunct Personal Effects Receptacle is made from urethane-coated nylon canvas and designed to fit in the center of the Surly Moloko Bar. It has space for essentials and can easily be accessed while riding. - Constructed from urethane-coated nylon canvas to provide water-resistant protection - Elastic cord on top snuggly secures extraneous loose items like wrappers or gloves - Integrated light port allows a battery cord to pass through - Dimensions: 254 x 90 x 90mm
Surly Ultra New Front Hub
$60.00
Track stars and fixed-gear converts will love Surly's Ultra New Front Hub. This gorgeous hunk of aluminum sports sealed bearings for all-weather reliability and low friction. And, the hollow axle is forged from flex-free chromoly for steering precision, long-lasting durability and simple quick-release compatibility.
Surly ExtraTerrestrial 26-inch
$55.00
When you're out on a ride the last thing you want is to be limited by your tires in any way. Surly's ExtraTerrestrial tires were designed to let you ride without limits by following a simple tenet for tire design: make 'em high-volume and kick-ass. The ExtraTerrestrial tire was meant to serve as a heavy-duty off road touring tire that shines on hard pack surfaces. It uses a nylon breaker in the sidewalls for cut protection, a molded pattern for anti-cut propagation, and a Kevlar cap under the tread to protect against flats. The ET tire uses a distinctly directional tread pattern and its width yields more traction than you might expect from a tire with such little rolling resistance. The tread is low profile with a file tread in between blocks. The ExtraTerrestrial tire has enough width and traction for the soft stuff and won't bog you down on smooth or hard surfaces. It's made to be durable and versatile and is at home on tour or on the trail. - Bead Seat Diameter: 559mm - Casing: 60tpi, tubeless-ready bead (928g)
Surly Long Haul Trucker Disc Fork (26-inch)
$55.00
Classic 100% chromoly construction and engineered for modern accessories, that's Surly's Long Haul Trucker Disc Fork. Its beautiful curved blades are brazed to a lovely and tough investment-cast crown and dropouts. There are disc-brake mounts and eyelets for fenders and mounts for a standard or low-rider rack. Plus, it boasts a tough powdercoat finish that's tres chic. - 100% CroMoly steel construction, curved blades, powdercoated - Extensive mounting options with threaded eyelets in four locations: double eyelet dropouts, mid-blade, and a pair drilled into the fork crown - 51mm IS disc brake mount - 26" has clearance for a 2.1" tire
Surly Stainless-Steel Chainring (130mm BCD)
$48.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.1mm thick so they work well with 9-speed chains.
Surly Junk Straps 6-Pack
$40.00
Surly's Junk Straps are basically really long toe straps. They're 120cm woven nylon with a stainless steel buckle. Surly had them made to specification to ensure that they work well and last a long time. They're easy to use and they stay tight. Once you're ready, loosening them is quick and easy. They're light, pack small, and securely and conveniently attach all kinds of stuff to your rack, basket, handlebar, backpack, under your seat, around your thigh…just about anyplace. You can combine them for even longer straps. - Pack of 6
Surly Knard Tire 700c
$30.00 - $40.00
Surly's Knard is a 700c x 41mm tire with the perfect tread for maximum traction and low rolling resistance. Designed for wherever your path leads, the Knard is the tire you want beneath you as you plot your next adventure.
Surly Singlespeed Spacer Kit
$40.00
Pair this kit with a cassette cog of your choosing (sold separately) and discover the joy and simplicity of a singlespeed without the cost of a new wheel. The Singlespeed Spacer Kit includes a variety of high quality aluminum spacers so you can dial your chainline and a stainless steel lockring to tighten everything down right.
Surly Knard Tire (27.5-inch/650b)
$35.00
Surly's Knard is a 27.5-inch x 41mm tire with the perfect tread for maximum traction and low rolling resistance. Designed for wherever your path leads, the Knard is the tire you want beneath you as you plot your next adventure.
Surly Ultra New Hub Axle Kit
$34.15
Surly Ultra New Axle Kits are for upgrading the internals of your existing Surly New hubs or replacing the internals on your Surly Ultra New hubs. -Compatible with Surly New hubs (upgrade kit) and Surly Ultra New hubs (replacement kit) - Each kit contains an axle, two 6901 cartridge bearings, two aluminum dust shields, two stainless steel cones, two stainless steel 6x1mm bolts, and two stainless steel bolt washers - Axle is quick release and bolt-on compatible; bolts included, QR is NOT included - Standard Surly New hubs come stock with 7901 bearings; this kit uses 6901 bearings which are non-angular
Surly Big Dummy Rail Collars
$33.50
Surly's Dummy Rail Collars are nothing more than a simple clamping device that buttresses the connection between your Big Dummy Frame and the Dummy Rails. They increase the stiffness of the interface of these two parts and help keep your cargo from getting its salad tossed… unless of course your Dummy Bags are filled with tossed salad. These are designed specifically for use with the Big Dummy frame and Dummy rails, and will not work with Xtracycle rails. WARNING: Properly installed Dummy Rail Collars are required for carrying live cargo on your Big Dummy.
Surly Hurdy Gurdy
$30.00
Hurdy Gurdy is another nifty device that keeps a rear wheel from slipping forward in the dropout under pedal load. It's designed for the Cross-Check's semi-horizontal front-loading dropouts, and will also work on many other similar dropouts. Hurdy Gurdy is investment cast of stainless steel for durability and good looks, and shares many of Tuggnut's design features. Its two axle holes allow for a wide variety of fore/aft wheel positions, it will work with standard QRs, bolted axles, and nutted axles up to 10mm.
Surly Stainless-Steel Chainring (104mm BCD)
$30.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.2 - 2.3mm thick so they work well with wider chains.
Surly Petite Porteur Bag Liner
$24.00 - $28.00
Designed for use in the Surly Petite Porteur House. Neon color to make it easier to find objects inside a dark bag. - Urethane coated, water-resistant nylon stuff sacks - Drawstring closure
Surly Front Rack Plate Kit
$12.50 - $25.00
Surly Front Rack Hardware
Surly Constrictor Seatpost Clamp
$15.00 - $16.00
If you're suffering from a slipping seatpost, Surly has the remedy. The Constrictor Seatpost Clamp grabs your post tight and hangs on for dear life. It's machined from anodized aluminum billet, uses an 8mm bolt for ultimate strength, and can accommodate a rear cantilever brake hanger.