Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other
$249.99
Three-Speed Sturmey Archer Coaster Brake Trike Conversion Kit
- 21T Front Drive Cog
- 22T Rear Transfer Cog
- 24T Axle Drive Cog
- Cable stop required when installing on Sun Atlas Industrial Cargo Trike
$243.77
Master cylinder assemblies for Magura brakes include a master cylinder, lever blade and handlebar clamp. Hose fittings and line are sold separately. Flip flop design allows unit to be mounted to either the left or right side.
- Magura MT Trail SL Disc Brake Master Cylinder Assembly, 1-Finger Carbolay Lever, Black
$219.99
Your Sun Traditional Trike can be made even more useful with the addition of twist-shift 7-speed gearing and a powerful rear disc brake! This complete kit includes all necessary components for converting your 2016 or later Sun Traditional Trike to a 7-speed derailleur system with a mechanical disc brake, giving you an easy and efficient ride up and over any type of hill and smooth, safe stopping on the other side. The parking brake feature on both front and rear brake levers allows you to lock either or both brakes simultaneously to load or unload with ease. Simple and common parts mean easy maintenance for years of use. Kit includes all components including items such as cable ties and other small parts for an original-equipment look.
- Sun Race M30 7-speed twist shifter
- Sun Race M40 7-speed direct-mount derailleur
- Sun Race M3 7-speed freewheel (13-15-17-19-21-24-28T) with 15mm trike axle adapter
- 36T x 1/2" x 3/32" chainring
- K.M.C. Z51 1/2" x 3/32" chain
- Promax DSK-300 mechanical disc brake and mounting hardware
- Promax 160mm stainless steel rotor with 15mm trike axle adapter
- Promax BL-46K 4-finger brake lever with parking lock
- High-density black foam grips, 92mm left side / 130mm right side
- Kit includes all parts needed for complete installation
- Kit only compatible with 2016 or newer Sun trikes with rear derailleur and disc brake mount on rear unit
$210.00
- Fastener kit with an assortment of nuts, bots and washers.
- 475 Pieces, 18 Different Parts, Three Bolt Styles in Lengths 8 to 30mm
- Assortment of commonly used bicycle fasteners
$209.00
REAR DERAILLEUR CAGE ASSEMBLY KIT RED XPLR AXS (FULL REPLACEMENT CAGE ASSEMBLY INCLUDING OUTER AND INNER CAGES, DAMPER AND PULLEYS)
Use only SRAM parts with SRAM components. Installation of parts and accessories not originally intended could result in less than optimal performance and/or injury. For in-depth service information on SRAM products, refer to our website at www.sram.com/service. Information contained on SRAM Connect is subject to change at any time without prior notice.
$202.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother.
- Inner Diameter: 17mm
- Outer Diameter: 30mm
- Width: 7mm
$200.00
Replacement CSU Components for RockShox
$199.99
- Attach and remove aerobars in seconds, without any tools, for the best setup for every ride
- Patent pending quick release mechanism
- Features a secondary safety release mechanism to prevent accidental release
- Adjustability includes extension length, arm pad fore-aft, and arm pad width
- Available in carbon or 6061 aluminum and L-bend or S-bend shapes
- 564 gram per pair (carbon S-bend), 630 gram per pair (aluminum S-bend)
$199.99
Attach and remove aerobars in seconds, without any tools, for the best setup for every ride\n-
- Patent pending quick release mechanism
- Features a secondary safety release mechanism to prevent accidental release
- Adjustability includes extension length, arm pad fore-aft, and arm pad width
- Available in carbon or 6061 aluminum and L-bend or S-bend shapes
- 564 gram per pair (carbon S-bend), 630 gram per pair (aluminum S-bend)
$188.00
Cassette spacers, bottom bracket spacers and hardware for HollowtechII, GXP, BB30/PF30.
- Comprehensive shop kit for bottom bracket and cassette/freewheel spacing needs
- 120 pc. kit in durable plastic storage box
$173.00 - $179.00
RockShox XLoc Parts
$174.00
Minimalist double butted aluminum extensions designed for draft legal Triathlons (ITU and UCI approved)
Composite adjustable armrests, a one piece composite aero bridge and molded armrest pads
$171.00
The Airstryke II takes the features of the ever popular Airstryke and adds an expanded fit range and more comfortable armrest. The flip up bracket and classic shape are retained.
Performance
The Airstryke II is intended to allow riders to add aerobars to their road or adventure bike without sacrificing the ability to hold the bars close to the stem. The comfortable grip angle and smoothly curved armrest offer a relaxed position for long days in the saddle.
Fit Data
- Armrest Offset: -85mm to 17.5mm in 7.5mm steps
- Armrest Width: 131mm to 298mm in 18.5mm steps
- Armrest Stack: 40mm
Origin
As one of the most popular model in the history of aerobars it seemed appropriate to update the much loved Airstryke with our new generation fit range and comfort focused armrest. We didn't want to change the elements that have made the bar so successful and the changes made just enhance the adjustability and comfort.
- Bracket: L2 Flip-Up
- Clamp Diameter: 31.8mm (26.0 w/Shims)
- Armrest: Ergo Armrest
- Armrest Stack: 40mm
- Reach: -85mm to 17.5mm in 7.5mm steps
- Extension Adjustment: 150mm (center of basebar - end)
- Armrest Width: 155mm - 203mm
- Weight: 592g
$170.00
RockShox 35mm Seal Kit for repair and maintenance of Rockshox suspension forks.
$169.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother.
- Inner Diameter: 30mm
- Outer Diameter: 42mm
- Width: 7mm
$165.00
Allows for additional hand positions on long rides and during endurance events
- Superlight carbon construction, 98g with the provided stainless hardware
- Compatible with most 31.8mm diameter flat MTB and road handlebars
- Allows GPS and LED attachments
- Only requires 2.5~3Nm of torque when mounting to the handlebars
$163.30
Replacement lever blades for Magura disc brakes
$154.20
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits.
- DT Swiss EXP 54 Tooth Upgrade Kit w/ Bearing
$150.00
RockShox Motion Control Compression Dampers
$150.00
Shop kit of bearing retainers for loose-ball headsets, hubs and bottom brackets.
- Bottom bracket: 1/4x9=12; 5/16x9=16 (#64); 5/16x10=16 (#66), 5/16 x 12 (Qty 4)
- Bearing retainer assortment in all the popular sizes for headsets, hubs, and bottom brackets; includes plastic organizer
- Hubs: 3/16x7=8; 1/4x7=16
- Headset: 5/32x22=8; 5/32x16=8; 3/16x16=8; 5/32x20=24
$148.00
Complete assemblies of remotes, hoses and fittings for Reverb and Reverb Stealth.
$145.00
- Includes barb and olive
- Brake Lever Clamp: 22.2mm, MMX compatible
- Lever Blade Material: Carbon
- Reach Adjust: Tool-free
$140.00
RockShox Remote lockout parts
$137.95
Replacement lever blades for Magura disc brakes
$136.00
The bracket is forged to create a sleek low stack design. It offers significantly lower stack than the rest of the Sonic range while retaining the extension reach and width adjustment options. It is compatible with a 31.8mm basebar, our riser kits, and 22.2mm extensions in aluminum and carbon.
- Materials: Forged 6061-T6 AL
- Stack Height: 23.5mm
- Width Adjustment: 37mm
- Basebar Clamp Diameter: 31.8mm
- Extension Clamp Diameter: 22.2mm
- Weight: 352g
$135.99
Shimano Di2 External Battery Mounts
- All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions
- Use Di2 system checker to update component firmware
$103.99 - $135.99
Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.
$134.93
Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation.
- Fully replace the functional mechanism of KS dropper posts
- May not work with OEM dropper posts
$134.93
Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation.
- Fully replace the functional mechanism of KS dropper posts
- May not work with OEM dropper posts
$134.93
Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation.
- Fully replace the functional mechanism of KS dropper posts
- May not work with OEM dropper posts