$15.00 - $16.00
If you're suffering from a slipping seatpost, Surly has the remedy. The Constrictor Seatpost Clamp grabs your post tight and hangs on for dear life. It's machined from anodized aluminum billet, uses an 8mm bolt for ultimate strength, and can accommodate a rear cantilever brake hanger.
Surly Stainless Steel Track Lockring. - Fits all but Campagnolo, Miche or Phil Wood - 5mm thick with 0.65mm lip for maximum thread and lockring wrench contact
Surly's low-profile, bolted Thru-Axles are specifically designed for use with Surly thru-axle compatible frames. Not sure which one fits your bike? Get in touch, and we'll ensure you're choosing the correct axle for your application.
If you've got rear-facing horizontal dropouts and you don't want your chain to slip when your rear wheel pulls forward, then Surly's got you covered. The Tuggnut is made from investment-cast stainless steel and it'll hold your wheel in place. Plus, it comes with an adapter for quick release axles and features an integrated bottle opener.
Single chainring drive train setups are all the rage these days. With the introduction of exceedingly wide range 10- and 11-speed cassettes, the need for two chainrings has become a thing of the past. But when you only have one chainring, the only thing standing between you and a long walk back to the trailhead is you making sure you don't destroy your one chainring. That's why Surly made a chainring guard to fit O.D. cranks. It is made of aluminum and will take the hit for your chainring. It comes in 5 bolt, 94mm BCD and was designed to protect 22t – 30t rings.
Pair this kit with a cassette cog of your choosing (sold separately) and discover the joy and simplicity of a singlespeed without the cost of a new wheel. The Singlespeed Spacer Kit includes a variety of high quality aluminum spacers so you can dial your chainline and a stainless steel lockring to tighten everything down right.
- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame
- Type: Lock washer - Size: 1" Keyed
- Rubber - Color: Black
- Aluminum w/lock nut - 18mm long/6mm O.D.
- For MTB levers - 7mm x 1mm - Aluminum construction
- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction
- Crown Race MX - Size: MX TH 26.4mm
- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact
$5.00 - $8.00
- Alloy construction - Great for Cruiser or BMX bar conversions
$6.00 - $10.00
• Aluminum clamp with a chromoly bolt
- Universal design double rail saddle clamp
• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts
- Replacement front cable hanger - Aluminum construction
- DT Swiss cartridge bearings - Sold in pairs
Sunlite braze-on front derailleur adapter
- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front
Gel Pads maximize comfort with any drop bar and tape, by absorbing vibration and impact shock.
QUICK-LINK FEATURE - Tool-free assembly (possible) - Non-reusable - TL-CN10 BENEFIT - Easy connect - Compatible with current 11-speed chains - Quick assembly tool
- Replacement chain pins for Shimano 11-speed chains - Compatible with CN7900/7801 chains - 3 pins per pack
- Width: 5.8 mm - Drivetrain Speeds: 11 - Color: Silver - Reusable: No
- Replacement chain pin for 7- and 8-speed Shimano chains - 3 replacement pins per pack
- Replacement pins for 9-speed Shimano chains - Compatible with CN-7700/HG92 chains - 3 replacement pins per pack
Shimano Front Derailleur Braze-On Adaptors allow you to run a braze-on style front derailleur on a frame that doesn't have a front derailleur braze-on mount. Multiple sizes cover fitment on most frames.
Replacement derailleur hangers for Salsa frames. Mounting screws included. Hanger 257 Fits: Salsa Ala Carte Ti 2011, Salsa El Mariachi Ti 2010-2012, Salsa Fargo 2011-2013, Salsa Fargo Ti 2011-2013, Salsa Spearfish 2011-2013 with QR Rear Triangles, Salsa Vaya 2011+, Salsa Vaya Ti 2011-2012, Salsa La Cruz Ti 2011, Salsa Beargrease 2013, Salsa Warbird 2013-2015, Salsa Warbird Ti 2013-2015, Salsa Colossal 2013+, Salsa Colossal Ti 2013-2014, Salsa Mamasita 2012-2013, Foundry Chilkoot 2016 Hanger for 2014+ Split Pivot Frames Fits: all Split Pivot Horsethief, Pony Rustler, Spearfish Bucksaw and Deadwood Suspension Hanger for 2015 Beargrease 2 and Cogburn CB4 Fits: Cogburn CB4 and Salsa Beargrease 2 2015