Racks and Bags

- Includes basket holder - Carrying handle for off bike use - Polyester powder coating - 11.75" x 8" x 9"

This versatile basket is the most adaptable front basket Wald offers. - Made in U.S.A. (Maysville, KY) - Deep basket that is sized for a grocery sack - Dimensions: 14.5 x 9.5 x 9 inches; basket tapers to 12.25 x 7 inches - Extended handlebar clamps fit 7/8" and 1" diameter handlebars - Two-piece adjustable legs extend from approx. 14 inches to 22 inches and mount to either the front axle or fork eyelets for bikes with quick release front hubs - Available in gloss black (198GB) or white (198WH) Powder Coat Finish - Complete basket weighs 3 lbs.

This versatile basket is based on Wald's popular 133 basket but uses a holder that bolts onto your handlebar. The holder offers greater clearance between the bar and basket for shifters, cables, and brake levers. Available in white (3133WH) or gloss black (3133GB) powder coat finishes. - Made in U.S.A. (Maysville, KY) - A Quick Release Basket with Bolt-on Holder for stable installation and use - Lift the handle to remove the basket and take it with you - Basket locks back in place when returned to the holder - Dimensions: 14.5 x 9.5 x 9 inches; the basket tapers to 12.25 x 7 inches at the bottom - Holder designed to fit 7/8", 1" and 31.8mm diameter handlebar - Handlebar clamps are 2" apart and offer clearance for shift and brake cables - Powder Coat Finish - Complete basket including the holder weighs 3 lbs.

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061 T6 alloy construction - To be mounted on bikes with disc brakes - 625g - 55lb weight capacity

- Specifically designed for 29" mountain bikes and larger volume 700C wheels - Compatible with bike frames equipped with disc brakes - Tubular aluminum rear rack for loaded touring - MTX 2.0 QuickTrack compatible with all MTX Trunk Bags or MTX rear baskets - 6061 T-6 hollow aluminum - 55lb weight capacity - 680g

- The perfect quick-mount front rack system for road, cross, hybrid or touring bikes with rigid forks. This one-size-fits-all front rack features an innovative top plate that adjusts to level independent the fork angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags.

Keep your beverage cold or hot with the insulated ADV stem bag. May be mounted on the left or right side, and fastened with adjustable straps on the handlebar and stem. Drawstring enclosure, 1L compartment insulated to keep contents cool or warm. - May be mounted on either side (Left and right) of the stem - Insulated for warm or cool items - Opens/closes by drawstring - PU coated splash resistant 600 denier Nylon - Fits up to 160mm head tube circumference - Capacity: 61 cu in (1L) - Weight: 100g

Patented rack attachment system works on virtually any bicycle from full-suspension mountain bikes to commuters and everything in between. - Patented attachment system secures easily - Tough construction allows for variety of rugged riding uses - Silent and vibration free performance - Includes rails for mounting panniers - Works on the rear seat stays and front fork - Works with any type of frame material

Most of you don’t need the cargo capacity to land a helicopter on your rack. Sometimes, all you want to do is grab a sixer from the beer store on the way home or pick up a nice bouquet of flowers. For whatever the situation dictates, we offer the 8-Pack Rack. The 8-Pack Rack is a solid pedestal upon which you may rest a handlebar bag, grocery bag, minaudière, satchel…or whatever you use to carry your bowling ball around. The 8-Pack Rack attaches to most forks with mid-blade and crown eyelets. It uses stainless steel hardware (handily housed in a reusable Surly Tool Bag), and has the characteristic durability, versatility, and repairability all Surly products are known for. The 8-Pack Rack has lots of barrel braze-ons, so you can customize your cargo tie-downs…or just bolt on as many lights as you can. Rack Specifications: Color: Black or silver Weight Limit: 13.6kg (30lb) Finish: ED Coating + Powdercoat Rack Material: Tubular 4130 Chromoly Platform Dimensions: 270mm x 160mm

If you like to ride useful bikes, racks make a lot of sense. Our 24-Pack Rack ups the useable cargo space from our 8-Pack Rack, providing more real estate for more stuff: more beer, more food, more random bits from the hardware store, more whatever. It’s manufactured from Chromoly tubing and uses the same stainless-steel hardware (handily housed in a reusable Surly Tool Bag) supplied with our other rack. It offers the same height adjustability too, so you can keep your cargo close to the ground and stable. It has plenty of braze-ons so you can customize how you secure your cargo…or just light your bike up like the space station. The 24-Pack Rack attaches to most forks that feature mid-blade and crown eyelets. It gives you a stable, rigid assembly upon which you might place your burden. No one likes a sweaty back and a sore ass, so take your stuff out of that messenger bag and put it on the front of your bike. Rack Specifications: Color: Black or silver Weight Limit: 13.6kg (30lb) Finish: ED Coating + Powdercoat Rack Material: Tubular 4130 Chromoly Platform Dimensions: 270mm x 400mm

Surly's burly line of tubular chromoly steel racks have been used on expeditions all over this planet for years.This Surly Rear Disc Rack is made of tubular chromoly steel and is specifically designed to fit frames with seatstay-mounted disc brakes like the Straggler (650B and 700c), Krampus, and Karate Monkey. - Tubular chromoly rack, stainless-steel hardware - Height-adjustable to accommodate 26-29" wheels - Hardware housed in reusable Surly Tool Bag

If you have to carry a bunch of gear, you're going to need a front rack. Sunlite's Gold Tec Front Rack has a capacity of 40 pounds, turning your bike into a serious workhorse. It's made from tubular aluminum and mounts to most fork bosses.

Turn your bike into an errand-running, cargo-hauling machine with Sunlite's Standard Lift-Off Basket. This sturdy basket attaches to your bike in a snap via handlebar mounts. It carries all your day's booty and the rubber-coated carry handle lets you bring your basket along when you're off the bike!

Great little aluminum rack. Perfect for strapping a Wald basket to, or on its own to support a handlebar bag. Stainless hardware, includes mounting tang and spacers so that you can clear the fork leg when you mount to the eyelets on the backside of your fork. Works well with a set of P-clamps as well (included). The Lucas 3 differs from the Lucas 1 in that we added a mid-fork mount for extra stability. - Round eyelets for strapping/zip-tying things on - Platform measures 240mm x 130mm - The eyelet to the bottom of the rack is 365mm. - Load capacity: 10kg/22 lbs. - Greyish silver or black - Weight: 570g

The Demi Porteur Rack is a wide but compact rack that installs on your fork's mini rack mounts or via P-clamps (included). Ideal for supporting larger bar bags like an Ocean Air Docena or Ostrich F-702 or a wire basket - Aluminum construction - Platform: 26cm x 30cm - 10kg load capacity - Includes Manny Strap - Weight: 530g - Satin polish silver or Black - Made for us by the folks responsible for Tanaka Fenders. If installing to a braze-on, the braze-on needs to be about 140mm from the brake hole on the crown. If your braze-on is too low, you will need to install using P-clamps on the legs.

The Anything Bracket Pack is specifically designed for use with our Anything Bracket and Anything Bracket Mini, but you can also strap it around your seat rails and use it as a seat bag to hold a tube, CO2, multi-tool, or anything else you want to stash in there. - Constructed of 200D nylon - Mounts to Anything Bracket, Anything Bracket Mini or saddle rails - Roll-top closure - Includes strap - Weight: 50g

The Salsa EXP Series Anything Cage Bag is designed to hold your gear on the Salsa Anything Cage and Anything Cage HD mounting systems. This bag protects contents from the elements while keeping weight low to the ground. - Designed to fit Salsa Anything Cage and Anything Cage HD (sold separately) - Quick-release roll-top closure for easy accessibility - Two Hypalon daisy chains for multiple secure attachment points - Molded TPU base helps keep bag upright even when off the bike - Primary Material: 400D Nylon with TPU Base - Weight: 128g

Designed with minimalist riding in mind, the Anything Bracket mounts to standard or Three-Pack frame bosses and works directly with the Anything Pack, allowing you to carry the essential items on the bike. - Mounts to standard or Three-Pack bosses on forks and frames - Bracket is constructed of lightweight 6061-T6 aluminum and padded to protect the frame - Includes Anything Pack, mounting hardware and strap - Anything Pack features a roll-top closure for easy access

The EXP Series Top Tube Bag provides easy access to food and gear on quick rides or bikepacking adventures. It bolts directly to Salsa frames equipped with top tube mounts or attaches to nearly any bicycle with the included hook-and-loop strap. - Waterproof fabric, water-repellent zipper, and welded construction keep contents dry - Closed-cell foam internal structure provides rigidity - Cord port for batteries and charging - Length: 190mm - Width: 30mm top, 50mm at base - Height: 80mm at front, tapering to 55mm - Total volume: 65.4 cubic inches

Salsa's Wanderlust Rear Rack carries essentials for touring and bikepacking over the rear wheel of your bike. It's constructed from aluminum to keep the weight down and features multiple cross bars for panniers, a taillight mounting bracket, and a long, cupped deck to load up your gear. For easy installation, the Wanderlust features long, very adjustable struts.

The EXP Series Seat pack keeps gear high, centered, and in line with you and your bike. Much like a dry bag or stuff sack, the EXP Series Seat pack fits a wide range of load sizes, and dutifully carries anything you need on your next two-wheeled mission. - Water-resistant welded construction with waterproof fabrics - Roll type closure and air purging valve that allows for managing overall volume - Stretch cord storage on top - Durable 1000D material strategically placed in high wear areas - Weight: 380g - Capacity: 6 – 14 Liters

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed around our EXP Series Top-Load Dry Bag, which maintains a fixed width for loading with ease, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly—an essential part of any well-balanced bikepacking setup. - Kit includes Anything Cradle, Top-Load Dry Bag, EXP Series Front Pouch, and two 30" Salsa EXP Series Rubber Straps - EXP Series Anything Cradle Top-Load Dry Bag is fixed-width for easy loading - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Works with or without EXP Series Anything Cradle Front Pouch - Anything Cradle Dry Bags feature a welded seam construction with waterproof materials and hook-and-loop straps for easier installation - Anything Cradle Front Pouch uses water-resistant fabric with welded seams for weather protection - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

- Waterproof - Reflective Elements - Mount for clip on light - Spacers for handlebar spacing - 9 Liters 700x315mm - 2.4 gallon 27.6x12.4in

The Mountain Feedbag is an on-the-go aid station for endurance riding. It offers ample food storage with fumble-free, one-handed access via an innovative drawcord system. Slightly larger than the previous version, you can now easily fit your beloved 1L Nalgene bottle, camera lenses, and more. It also features an additional outside pocket, leaving you with more space for wrappers, sunscreen, granola bars, and other small items. Mountain Feedbags also work well as bike-mounted lens cases for mirrorless camera systems. Features: - Super-fast, one-handed (really!) opening and closure with no fumbling to grab cord locks - Three external pockets for gels and trash - Three-layer construction: outer fabric, foam, and liner. Foam adds stiffness and insulates. - Bright yellow interior liner snaps in place and is easily flipped for cleaning - Mounts to either side of stem with adjustable attachment points - run two for tons of storage - Easily used in combination with a Sweetroll or Harness handlebar system - Fits bike water bottles, Nalgene bottles, and bear spray cans - Weight: 3.7oz - Materials: Revelate exclusive VX 21 polyurethane coated X-pac; 420 denier yellow lining - Made in the USA with domestic and imported materials

Strong and svelte, the Everyday Rack from Portland Design Works mounts to frames with or without eyelets and will fit around wheels and tires up to 29x2.4". The handsome bamboo platform is slightly tapered, giving the Everyday Rack a light, racy feel that looks great on a wide range of frame styles. The lower mounting bars allow panniers' center of gravity to be closer in line with your wheel, improving rear-end stability even when hauling heavy loads. Additionally, it means the platform is easily utilized, even when riding with two panniers. The Everyday Rack is crafted from durable alloy tubing, may be mounted to a rear wheel skewer, includes a tail light mounting point and solid, adjustable attachment arms. It's a breeze to install, so you'll be pedaling cargo in no time. Rated for up to 25 kgs (55 lbs). - Strong alloy tubing - Double ply bamboo deck - Deck measures: 209 x 76 mm (8.25 x 3") - Height: 419 mm (16.5") - Weight: 1.6 lbs  - Max Load: 25 kgs (55 lbs) - Lifetime PDWarranty

PDW Bodega Basket features all-aluminum construction for all-weather durability. Easy-to-use Klickfix bracket securely holds rack to handlebars and allows easy removal for shopping. - Integrated lock holder

PD 350 dry bags are a great value with excellent features. The proven roll-top closure (roll 3-4 times) and single stiffener bar ensure 100% waterproof protection and optimal packing volume. A reinforced base provides stability and easier loading. The models in the lime color option all feature a valve for deflating and compressing.

Weighing just 290 grams (including adapter), the fork pack offers approximately 4.1 liters of additional storage space for bike packing. With the help of the QLS adapter, this ultra-light bag with roll closure can be mounted on forks with eyelets or cage mounts intended for this purpose, as well as on forks without cage mounts, as long as the fork blades sport a constant diameter of 30mm to 42mm. Specifications: - Ultralight, waterproof bag (single pocket) with roll closure - The Fork-Pack is primarily designed for attachment to bicycle forks, but it can be mounted on non-tapered vertical tubes with a consistent diameter, e.g. Kick Style Scooters - Abrasion-resistant PU-coated nylon fabric - Allows additional luggage to be carried on bikes using the Quick-Lock S (QLS) adapter system - Adapter is compatible with forks with eyelets and tubes with constant diameter from 30 mm to 42 mm - The Quick-Lock S mounting bracket may be bolted directly to a fork with „braze-on“ eyelets or attached to vertical tubes using the supplied band-clamps - Ultra-fast installation, with one click the bag snaps in to place - The removal is just as fast, simply move the release lever and pull the bag upwards - The robust Quick-Lock S mounting plate remains mounted to the bicycle - Low profile locking elements ensure snag-free use - Internal stiffener - Reflective ORTLIEB logo - Maximum load 3kg / 6.6lbs

Weighing next to nothing and unusually practical, the Cockpit-Pack helps to secure your personal fuel supply by giving you direct, one-handed access to your favorite snack while you continue to ride. The large opening ensures that you’ll immediately find what you need. Whether you want quick access to your snack, smartphone, or camera, they can all be optimally stowed in the Cockpit-Pack. Thanks to the stiffened material on the inside, the bag retains its shape at all times and can be easily opened and closed. The 82-gram, lightweight Cockpit-Bag is waterproof and attaches easily with its extra-strong Velcro straps to your top tube and head tube or to your top tube and seat tube FURTHER FEATURES: - Fits on MTBs (full-suspension and hardtails), road bikes, and hybrid bikes - Can also be attached to your top tube and seatpost

WATERPROOF FORK BAG WITH ROLL-TOP CLOSURE FOR BIKEPACKING Fast, faster, Fork-Pack with Quick-Lock S adapter system. The all-new and innovative adapter system is ideal for attaching bags like the waterproof Fork-Pack to the fork of your bike. Weighing just 290 grams (including adapter), the fork pack offers approximately 4,1 liters of additional storage space for bike packing. With the help of the QLS adapter, this ultra-light bag with roll closure can be mounted on forks with eyelets or cage mounts intended for this purpose, as well as on forks without cage mounts, as long as the fork blades sport a constant diameter of 30 mm to 42 mm. QLS bags are primarily designed for attachment to the fork, but can be attached to all vertical tubes using the accessories supplied. The Fork-Pack (205 grams) can easily and quickly be attached and removed from the adapter plate (85 grams) with just one hand in seconds. The nylon bag is abrasion-resistant, PVC-free and, of course, sustainably made in Germany. The maximum load is three kilograms / 6.6 lbs. Attention: Not suitable for mounting to carbon forks without "braze-on" eyelets, tapered fork blades or frame tubes