Racks and Bags

The largest waterproof bike bags in the world are also available in wear-resistant, waterproof tarpaulin material made of PVC coated polyester. They offer the same payload as the Plus version. The remaining features are identical to those of the Back-Roller Pro Plus: additional front pocket, proven roll closure, and ingenious QL2.1 system for a super convenient and secure attachment to virtually all commercially available bike racks. Those who hesitate to go, due to a lack of storage space, to venture off on a bike tour around the world, a European bike vacation, or a multi-day tour with the family will definitely no longer have any excuses! Time to pack up and take to the road! Further Features: - Integrated inside pocket - Shoulder strap - High luminosity reflectors on both sides - Right and left-side mounting - Tool-free adjustable QL system – fits on all tubes with a diameter of up to 16mm

The perfect pair of bags for any adventure: you'll be astonished at how much gear fits in the Ortlieb Bike-Packer Plus! The classic flap closure is easy to operate and provides a maximum of stowage on top. The waterproof, three dimensional front compartment offers additional space for many of the small items you may need to access quickly while en route. The durable, high-quality Cordura fabric provides optimal protection against water, dust and abrasion. Thanks to the proven QL2.1 system with self-closing hooks, attaching the Bike-Packer Plus to your bike rack and removing it again is a matter of seconds. All of these features allow you to devote your attention to your tour and the beautiful sights to see along the way, no matter what the weather! - Pannier pair with lid closure and large packing volume - PU-laminated Cordura - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Due to its symmetrical form it is possible to use only one bag on left or right side - The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow - The edge protector prevents contact with spokes and abrasion - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflector - Easy to clean inside

Made of durable polyester fabric and long known as an ideal pannier for extended tours in any kind of weather, the spacious Bike Packer Classic is now available with the QL2.1 rack mounting system. The advantage of this faithful companion at your rear wheel: greater transport comfort, stability and safety. - Panniers (pair) with classic lid closure for large packing volume - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Due to its symmetrical form it is possible to use only one bag on left or right side - The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow - The edge protector prevents contact with spokes and abrasion - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflector - Easy to clean inside

Durable polyester fabric make this pannier a long lasting touring companion. The waterproof roll closure ensures safe and waterproof storage of food and equipment. With its QL2.1 fixing it is quickly mounted and taken off the bike rack. A shoulder strap provides carrying comfort when taken off the rack. - Classical rear pannier (pair) with roll closure - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picknick) - Can be combined with the ORTLIEB Rack-Pack size S or M - Highly reflective Scotchlite reflector - Easy to clean inside - Optional accessories: ORTLIEB carrying system, outer pockets (size S), mesh pocket, bottle cage, 20 mm QL2.1 hook, anti-theft device long - Note: In order to meet standard IP64 (6=dustproof, 4=protected against splash water coming from all directions) the closure must be rolled 3-4 times.

Ideal for multiday tours and self-supported races, the ORTLIEB Gravel-Pack duo offers you a combined payload of 25 liters for additional gear such as mess kits, food, and other "luxury" items. Mounting the Pack to your lowrider bike rack allows you to maintain a low center of gravity and undiminished off-road agility despite your extra gear. While the Pack's streamlined design – without inside pockets and a shoulder-strap pad – helps to keep it in the featherweight class, its lightweight, wear-resistant material withstands even the harshest of rock and gravel conditions you encounter on your way. And, no matter how wet the weather, your things will stay dry thanks to the proven ORTLIEB-waterproof quality and roll closure. With the QL2.1 system and two mounting hooks, the Gravel-Pack remains tightly attached to your bike rack while you ride over hill and dale on your gravel grinder, mountain bike or fatbike.

Get ready for your next bikepacking adventure! As a key item in your bikepacking setup, the ORTLIEB Seat-Pack comes with Velcro straps to enable convenient and secure mounting to your seat stem. Projecting backwards from the seat stem, your Seat-Pack also serves as a rear fender. The spacious, waterproof Seat-Pack keeps its contents (e.g. an extra set of clothes) safe and dry. Depending on how long you plan to be away and your Seat-Pack model, you can conveniently adjust the volume of your pack from 8 to 16.5 liters by adjusting the roll closures on the sides. An additional valve allows you to quickly and easily compress your soft gear for a more compact fit. Your Seat-Pack also serves as a replacement backpack when you’re out on a day trip, no matter whether you ride a hybrid bike, a mountain bike, a road bike, or an electric mountain bike. Thanks to its elastic drawstrings on the top, the 16.5-liter model offers additional space for items you need to be able to access quickly. This model needs only 15 centimeters of space on your seat stem. FURTHER FEATURES: - Reinforced fabric at all points of contact to the seat - Vertical daisy chain for rear light - Also suitable for carbon seat stems - Lightweight design - Four 3M Scotchlite reflectors available for full extension

Bikepacking is also about embracing minimalism. You head off on your bike into the great outdoors, away from it all for an extended period. The amount of gear you can take is limited! The ORTLIEB Frame-Pack allows you to exploit your bike frame to create valuable stowage. Thanks to its lower center of gravity below your top tube, the Frame-Pack makes for an ideal stowage location for heavy gear such as tools, camping stoves, and food supplies. The proven, waterproof nylon fabric and the waterproof zipper ensure that your things remain absolutely dry even in the most inclement weather. Mounting the Frame-Pack with the ultra-strong Velcro straps to the top tube, seat tube, and down tube is a snap. The Frame-Pack is available in a 4-liter size and a 6-liter size – depending on the size of your bike frame.

The ORTLIEB Toptube Frame-Pack is the smart solution for all who want to use their frame's main triangle for storage space without having to do without their water bottle. The solution also works for those who have full-suspension mountain bikes with limited triangle space. With its 4-liter payload, the Toptube Frame-Pack provides plenty of space for heavy equipment such as tent poles, tools, and food supplies, while also helping to secure a low center for improved rising performance. And given that the bag and its zipper are waterproof, you can even cross rivers on your bikepacking tour without worrying about your stuff getting wet. The Frame-Pack attaches easily to your top tube and seat tube with the help of sturdy and highly adhesive Velcro straps. FURTHER FEATURES: - Ideal for all bikes with limited triangle space - Reflecting logo ADVICE: Suitable for carbon fiber frame.

Old Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that’s what you’re into. Tested and trusted in the most extreme environments on earth (we’re still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn’t made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - Fits up to 29 x 3-inch tires, with room for fenders. - Front or rear mountable. - Works with all dropper posts. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The main rack frame is made of 1/2" (13 mm) diameter tubing for durability, and the pannier rails are 3/8" (10 mm) diameter to fit all panniers. - The low pannier rail makes it a breeze to load and unload panniers with gear lashed to the deck. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The dropouts are height adjustable to keep the weight loaded low on the bike and fit a wide range of tire sizes. - The Divide come standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Divide has a load capacity of 55lbs when eyelet mounted. - For more adventurous endeavors we offer thru-axle or QR Fit Kits, that mount the rack to the axle and increase the load capacity to a whopping 70 lbs! - Powder coated a sleek and refined shade of black. - 960g including all hardware and extenders. - Made in Taiwan. - Lifetime warranty!

WATERPROOF HANDLEBAR BAG WITH QUICK RELEASE! A new fastening system, the Bar-Lock, enables the waterproof Handlebar-Pack QR (Quick Release) to be attached and removed in no time at all. This means that you can quickly and easily take off the bag and carry it with you when you reach your destination. Thanks to the bar-lock cord attachment, this bikepacking bag remains stable and secure on the handlebars, even on rougher terrain. Internal compressions and the roll closure adjustable height ensures the safe storing of gear or equipment. Two further hooks with CamLock fasteners on the front create further compression options. The handlebar pack QR has an 11-liter volume, weighs only 530 grams and is loaded from above. In addition to bikepacking, this pack would be a great asset for long gravel rides or races thanks to its narrow 32 centimeter design. Lateral outer pockets allow small accessories or snacks to be stowed away yet accessible while riding. The PVC-free bag is made of abrasion-resistant nylon fabric and is, of course, sustainably produced in Germany. The maximum load is five kilograms. Pair the bag with the extra Handlebar-Pack QR Inner Pocket to keep things tidy, and conveniently store and access your cash, cards or a mobile phone. - Reflective Logo and Reflector increase safety

The Scape Large Pannier is a superior waterproof (IPX4 certified) bag with a roll top closure 100% welded construction and weatherproof details. Equally at home as bags for long-distance touring or bags for commuting. The Scape Large Pannier is a 100% waterproof (IPX4 certified) bag designed for the rear rack, with welded construction and weatherproof details such as a roll top closure with reliable internal Velcro strap for expandable volume that keeps its contents dry. Made to last, this bag for cycle touring is constructed from hard-wearing details and specially selected components such as an external pocket with protective flap that increases bag capacity while helping to organise its contents. A special modular functionality to attach other bags from the Scape range, or a rear light, is provided by the bag’s lateral daisy chain. Furthermore provided with an aluminium Klick Fix® attachment system to fit most any rear rack. - Roll top closure - Internal Velcro closure - Front pocket with coated YKK zip and protective flap - Easy pull zipper - Front reflective logo - Nylon webbing - Hypalon details - Aluminium hardware - Klick fix aluminium attachment - Waterproof IPX4

Made for Gravel & Bikepacking and Adventure Cycling, the Scape Seatpost Bag is a saddle pack designed as a holster attached to the saddle and seatpost made to hold its own waterproof dry sack. Made for gravel and adventure cycling, the Scape Seat Bag is a bikepacking bag made from two separate elements: a holster and a 100% waterproof (IPX4 certified) removable drybag. The holster is built from rugged materials to last, the holster bottom designed to act as a mudguard and protect the internal bag from any rear wheel contact. The dry bag easily compresses thanks to its air valve release mechanism to minimise bulk, and can be rolled smaller when less carrying space is needed. The daisy chain allows attachment of modular bags, and a loop is included to attach a rear light. Made from waterproof material to be prepared for any ride, regardless of conditions. HOLSTER - Lateral reflective logo - Plastic buckles with cam lock - Aluminium hook to fix the dry bag into the holster - Vertical daisy chain for extra bags attachment - Reinforced fabric at all points of contact to the seat and wheel - Dryhole to drain any water drops or condensation - Nylon webbing - Loop for mounting a rear light DRY BAG - 420D Nylon fully welded - Waterproof - Roll closure - Air pressure valve to minimize the space

The Scape Small Pannier is a superior waterproof (IPX4 certified) pannier with a roll top closure, 100% welded construction and weatherproof details. Equally at home on the front or rear rack. The Scape Small Pannier is a 100% welded waterproof (IPX4 certified) bag with a roll top closure and weatherproof details, perfectly at home on the front or rear rack. Made to last, this modern bag for cycle touring is constructed from hard-wearing details and specially selected components like the external pocket with protective flap that increases the capacity of the bag while helping to organize its contents. The bag also offers special modular functionality to attach other bags from the Scape range thanks to the lateral daisy chain. Provided with the aluminium Klick Fix® attachment system for easy fastening to most rack systems. - Roll top closure - Internal Velcro closure - Front pocket with coated YKK zip and protective flap - Easy pull zipper - Front reflective logo - Nylon webbing - Hypalon details - Aluminium hardware - Klick fix aluminium attachment - Waterproof IPX4

Patented rack attachment system works on virtually any bicycle from full-suspension mountain bikes to commuters and everything in between. - Patented attachment system secures easily - Tough construction allows for variety of rugged riding uses - Silent and vibration free performance - Includes rails for mounting panniers - Works on the rear seat stays and front fork - Works with any type of frame material

- The perfect quick-mount front rack system for road, cross, hybrid or touring bikes with rigid forks. This one-size-fits-all front rack features an innovative top plate that adjusts to level independent the fork angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags.

Able to fit most standard-sized frames, the Scape Frame Bag is a practical welded bag,100% waterproof, with 2 full length zips, suited to bikepacking, gravel and other all-day adventure cycling pursuits. Able to fit most standard-sized frames, the Scape Frame Bag is a 100% waterproof, cycling half frame bag suitable for bikepacking, gravel and other all-day adventure cycling pursuits. An entirely welded construction ensures the pack is completely waterproof and holds its streamlined shape while in position on the bike, and is great for storing longer items such as a pump or tent poles via its two full length zips with an ergonomic zipper puller for fast and easy access. The main compartment comes equipped with internal organisation and a cable hole, while the corresponding waterproof zip on the opposite side, utilising the innovative KCC zip, is designed for small items. Attaches easily via Hypalon Velcro straps. - Lateral reflective logo - Two lateral pockets: - One pocket with coated YKK zip with protection flap, big compartment with internal organiser and cable exit - One KCC waterproof zip for small accessories - Easy pull zipper - Hypalon Velcro straps for easy attachment - Frontal TPU cable hole - Waterproof

- Waterproof - Reflective Elements - Mount for clip on light - Spacers for handlebar spacing - 9 Liters 700x315mm - 2.4 gallon 27.6x12.4in

Strong and svelte, the Everyday Rack from Portland Design Works mounts to frames with or without eyelets and will fit around wheels and tires up to 29x2.4". The handsome bamboo platform is slightly tapered, giving the Everyday Rack a light, racy feel that looks great on a wide range of frame styles. The lower mounting bars allow panniers' center of gravity to be closer in line with your wheel, improving rear-end stability even when hauling heavy loads. Additionally, it means the platform is easily utilized, even when riding with two panniers. The Everyday Rack is crafted from durable alloy tubing, may be mounted to a rear wheel skewer, includes a tail light mounting point and solid, adjustable attachment arms. It's a breeze to install, so you'll be pedaling cargo in no time. Rated for up to 25 kgs (55 lbs). - Strong alloy tubing - Double ply bamboo deck - Deck measures: 209 x 76 mm (8.25 x 3") - Height: 419 mm (16.5") - Weight: 1.6 lbs  - Max Load: 25 kgs (55 lbs) - Lifetime PDWarranty

Salsa's Wanderlust Rear Rack carries essentials for touring and bikepacking over the rear wheel of your bike. It's constructed from aluminum to keep the weight down and features multiple cross bars for panniers, a taillight mounting bracket, and a long, cupped deck to load up your gear. For easy installation, the Wanderlust features long, very adjustable struts.

WATERPROOF FORK BAG WITH ROLL-TOP CLOSURE FOR BIKEPACKING Fast, faster, Fork-Pack with Quick-Lock S adapter system. The all-new and innovative adapter system is ideal for attaching bags like the waterproof Fork-Pack to the fork of your bike. Weighing just 290 grams (including adapter), the fork pack offers approximately 4,1 liters of additional storage space for bike packing. With the help of the QLS adapter, this ultra-light bag with roll closure can be mounted on forks with eyelets or cage mounts intended for this purpose, as well as on forks without cage mounts, as long as the fork blades sport a constant diameter of 30 mm to 42 mm. QLS bags are primarily designed for attachment to the fork, but can be attached to all vertical tubes using the accessories supplied. The Fork-Pack (205 grams) can easily and quickly be attached and removed from the adapter plate (85 grams) with just one hand in seconds. The nylon bag is abrasion-resistant, PVC-free and, of course, sustainably made in Germany. The maximum load is three kilograms / 6.6 lbs. Attention: Not suitable for mounting to carbon forks without "braze-on" eyelets, tapered fork blades or frame tubes

Axiom's Streamliner 29er DLX Rack centers loads close to the rear wheel for improved stability and handling on your 29er bike. It's made of reliable and lightweight aluminum, features struts to keep loads from getting close to the rear wheel, and offers ample heel clearance when you're carrying panniers.

The EXP Series Top Tube Bag provides easy access to food and gear on quick rides or bikepacking adventures. It bolts directly to Salsa frames equipped with top tube mounts or attaches to nearly any bicycle with the included hook-and-loop strap. - Waterproof fabric, water-repellent zipper, and welded construction keep contents dry - Closed-cell foam internal structure provides rigidity - Cord port for batteries and charging - Length: 190mm - Width: 30mm top, 50mm at base - Height: 80mm at front, tapering to 55mm - Total volume: 65.4 cubic inches

Weighing next to nothing and unusually practical, the Cockpit-Pack helps to secure your personal fuel supply by giving you direct, one-handed access to your favorite snack while you continue to ride. The large opening ensures that you’ll immediately find what you need. Whether you want quick access to your snack, smartphone, or camera, they can all be optimally stowed in the Cockpit-Pack. Thanks to the stiffened material on the inside, the bag retains its shape at all times and can be easily opened and closed. The 82-gram, lightweight Cockpit-Bag is waterproof and attaches easily with its extra-strong Velcro straps to your top tube and head tube or to your top tube and seat tube FURTHER FEATURES: - Fits on MTBs (full-suspension and hardtails), road bikes, and hybrid bikes - Can also be attached to your top tube and seatpost

Weighing just 290 grams (including adapter), the fork pack offers approximately 4.1 liters of additional storage space for bike packing. With the help of the QLS adapter, this ultra-light bag with roll closure can be mounted on forks with eyelets or cage mounts intended for this purpose, as well as on forks without cage mounts, as long as the fork blades sport a constant diameter of 30mm to 42mm. Specifications: - Ultralight, waterproof bag (single pocket) with roll closure - The Fork-Pack is primarily designed for attachment to bicycle forks, but it can be mounted on non-tapered vertical tubes with a consistent diameter, e.g. Kick Style Scooters - Abrasion-resistant PU-coated nylon fabric - Allows additional luggage to be carried on bikes using the Quick-Lock S (QLS) adapter system - Adapter is compatible with forks with eyelets and tubes with constant diameter from 30 mm to 42 mm - The Quick-Lock S mounting bracket may be bolted directly to a fork with „braze-on“ eyelets or attached to vertical tubes using the supplied band-clamps - Ultra-fast installation, with one click the bag snaps in to place - The removal is just as fast, simply move the release lever and pull the bag upwards - The robust Quick-Lock S mounting plate remains mounted to the bicycle - Low profile locking elements ensure snag-free use - Internal stiffener - Reflective ORTLIEB logo - Maximum load 3kg / 6.6lbs

This seat pack with its convenient adapter system offers you an elegant means of stowing an additional amount of critical gear. The Saddle-Bag Two is a redesigned ORTLIEB classic, a seat pack that is so practical that it belongs on every bike tour! The 1.6-liter version (ideal for road bikes and mountain bikes) of the waterproof Saddle-Bag Two provides a secure place for a bike-repair kit, a smartphone, or other items. The 4.1-liter version offers almost as much storage space as a small backpack, making it an ideal supplementary pack when you have a lot to carry. Thanks to the pack's roll closure and side buckles, everything you stow remains snugly packed and easy to access. The Saddle-Bag Two attaches directly to your bike seat with an adjustable snap buckle. The intuitive adapter allows you to quickly attach the pack to or detach it from your bike. Moreover, the snap buckle is compatible with all previous Saddle-Bag Two models so that you could use it on different bikes. A Velcro strap that attaches to your seat stem provides additional stability, effectively preventing any unwanted shifting. Another advantage in the case of the large pack is that it doubles as a rear fender, keeping spray water off your back. Further Features: - PVC-free, polyurethane-coated nylon fabric - Ideal for use with mountain bikes, road bikes, and touring bikes - No protruding plastic parts on the inside - Adjustable attachment below your bike seat - Velcro strap compatible with seat-stem diameters of up to 34.9mm (e.g. the Birdy folding bicycle) - Scotchlite 3M reflector for added protection at night - Daisy chain for the optional attachment of a rear light

Axiom's Journey Adjustable 2429 Rack is made of light, rugged aluminum with vertically adjustable stays meaning it mounts on a wide range of rear wheel sizes. It handles even large, heavy panniers (sold separately) with additional looped struts that keep your panniers steady. There also is a platform on top, which adds strength and doubles as a mini fender.

- Specifically designed for 29" mountain bikes and larger volume 700C wheels - Compatible with bike frames equipped with disc brakes - Tubular aluminum rear rack for loaded touring - MTX 2.0 QuickTrack compatible with all MTX Trunk Bags or MTX rear baskets - 6061 T-6 hollow aluminum - 55lb weight capacity - 680g

- Water-resistant messenger pack designed to work with Origin8 front flat racks - Removable bottom panel provides structure and offers a sturdy platform for stacking items - Features a dedicated U-lock pouch, and multiple pockets for pens and small items - Roll top closure with adjustable strap and buckle - Durable 600D Polyester construction with TPU inner liner for water-resistance - Bag volume: 3800 CI

The Scape Top Tube Bag is a convenient bikepacking welded bag, 100% waterproof, for much-needed items, equipped with a fully waterproof KCC zipper to keep your bags’ contents dry. A convenient accessory bag for much-needed items, the Scape Top Tube Bag is is a convenient, 100% waterproof, welded bikepacking bag for much-needed items, equipped with an innovative, fully waterproof, easy-pull coated YKK zipper to keep your bags’ contents dry and safe. An entirely welded construction ensures the pack is completely waterproof and holds its streamlined shape while in position on the bike. The lateral sides and bottom are constructed internally with padded foam to protect contents and reduce clatter. Finished with smart and modern details like an exterior reflective logo and a front TPU cable hole. Attaches easily with Hypalon Velcro straps. - Lateral reflective logo - KCC waterproof zip - Padded support on lateral and bottom to protect your belongings and reduce clatter - Hypalon Velcro straps for easy attachment - Front TPU cable hole - Waterproof

The Fairdale Skaterack is the simplest and easiest way to carry a skateboard on a bike. The Skaterack attaches tool free to most any rear rack and pairs perfectly with our Adjust-a-Rack. Skateboard drops into the plastic coated rack and is held securely by a stretch cord. Rack positions board behind rear axle to leave plenty of room for heel clearance. Features Tool free attachment Secure hold with bungee strap Plastic coated rack Designed for maximum heal clearance Fits decks up to 9.25" wide (select 9.25" option) (Measured over the front/rear of trucks) Replacement bungee strap also available.