Other

Salsa Split Pivot Suspension Service Kits, for all 2014+ Horsethief, Pony Rustler, Spearfish, Redpoint and Deadwood Sus frames.

Salsa Alternator 1.0 and 2.0 UDH Kit for flat-mount brakes. - This Alternator Plate set works with all Alternator 1.0 and Alternator 2.0 compatible Salsa frames to allow the use of SRAM Full Mount derailleurs or SRAM UDH. - Fixes wheel in rearmost Alternator plate position (17mm back) - Native 140mm flat-mount disc brake compatibility - Includes required upper non-drive side bolt (choose 16mm or 18mm length to match frame thickness) and lock nut. All other hardware is re-used from current plates or can be purchased in the Alternator 1.0 or Alternator 2.0 Hardware Kit. - Requires a 12mm thru axle with 1.0TP and either a SRAM UDH or SRAM Full Mount derailleur (not included). Consult the Plate Kit instructions for recommended axle length based on the frame hub standard. - Engineering Identifier Number: 06-004163

Salsa Alternator 1.0 and 2.0 UDH Kit for post-mount brakes. - This Alternator Plate set works with all Alternator 1.0 and Alternator 2.0 compatible Salsa frames to allow the use of SRAM Full Mount derailleurs or SRAM UDH. - Fixes wheel in rearmost Alternator plate position (17mm back) - Native 160mm post-mount disc brake compatibility (no IS adaptor required) - Includes required upper non-drive side bolt (choose 16mm or 18mm length to match frame thickness) and lock nut. All other hardware is re-used from current plates or can be purchased in the Alternator 1.0 or Alternator 2.0 Hardware Kit. - Requires a 12mm thru axle with 1.0TP and either a SRAM UDH or SRAM Full Mount derailleur (not included). Consult the Plate Kit instructions for recommended axle length based on the frame hub standard. - Engineering Identifier Number: 06-004162

Alternator 1.0/1.5 Dropout Plate – non-drive side. - Allows for the rear axle to be set anywhere fore-aft in a 17mm range - Only compatible with Salsa frames originally sold with Alternator 1.0 or 1.5 dropouts - Fender mount - Accommodates 12mm thru-axle - Non-drive side plate only - Designed for flat-mount brake

Alternator 2.0 Dropout Plate – non-drive side. - Allows the rear axle to be set in two different fore-aft positions 17mm apart - Only compatible with Salsa frames originally sold with Alternator 2.0 dropouts - Compatible with frames featuring 142, 148, 177, or 197mm spacing - Accommodates 12mm thru-axle - Non-drive side plate only - Designed for post-mount brake - Use only with Salsa Hardware Kit for Alternator 2.0 Fixed Position Plates (sold separately)

Alternator 2.0 Dropout Plate - Allows the rear axle to be set in two different fore-aft positions 17mm apart - Only compatible with Salsa frames originally sold with Alternator 2.0 dropouts - Compatible with frames featuring 142, 148, 177, or 197mm spacing - Accommodates 12mm thru-axle - Thru-axle tread pitch: 1.5 - Designed for post-mount brake - Replacement for FS2355

Alternator 2.0 Dropout Plate – non-drive side. - Allows for 17mm of fore-aft adjustment in the rear axle position - Only compatible with Salsa frames originally sold with Alternator 2.0 dropouts - Compatible with frames featuring 142, 148, 177, or 197mm spacing - Accommodates 12mm thru-axle - Non-drive side plate only - Designed for post-mount brake - Replacement for FS2356

Alternator 1.0/1.5 Dropout Plate – non-drive side. - Allows for the rear axle to be set anywhere fore-aft in a 17mm range - Only compatible with Salsa frames originally sold with Alternator 1.0 or 1.5 dropouts - Fender mount - Accommodates quick-release axle - Non-drive side plate only - Designed for post-mount brake - Replacement for FS1372, FS1381

Alternator 1.0/1.5 Dropout Plate – non-drive side. - Allows for the rear axle to be set anywhere fore-aft in a 17mm range - Only compatible with Salsa frames originally sold with Alternator 1.0 or 1.5 dropouts - Fender mount - Accommodates 12mm thru-axle - Non-drive side plate only - Designed for post-mount brake - Replacement for FS1383

Alternator 1.0/1.5 Dropout Plate – drive side. - Allows for the rear axle to be set anywhere fore-aft in a 17mm range - Only compatible with Salsa frames originally sold with Alternator 1.0 or 1.5 dropouts - Fender mount - Accommodates quick-release axle - Drive side plate only - Designed for post-mount brake - Replacement for FS1384, FS1372

Alternator 1.0/1.5 Dropout Plate – drive side. - Allows for the rear axle to be set anywhere fore-aft in a 17mm range - Only compatible with Salsa frames originally sold with Alternator 1.0 or 1.5 dropouts - Fender mount - Accommodates 12mm thru-axle - Thread pitch: 1.5 - Designed for post-mount brake - Drive side plate only - Use only with Salsa Alternator 1.0 Hardware Kit (sold separately)

Alternator 2.0 Dropout Plate - Allows for 17mm of fore-aft adjustment in the rear axle position - Only compatible with Salsa frames originally sold with Alternator 2.0 dropouts - Compatible with frames featuring 142, 148, 177, or 197mm spacing - Accommodates 12mm thru-axle - Thru-axle tread pitch: 1.5 - Designed for post-mount brake - Replacement for FS2353

Beautifully machined and hand-friendly, Salsa's Flip-Off Quick-Release Skewer is a great way to keep your wheel attached to your bike. It's constructed from stainless steel to make sure it'll be along for the ride for years to come. This QR works with 170mm fatbike rear hubs.

Alternator Flat Mount is an adjustable dropout system designed to offer flawless functionality with flat-mount brakes installed. The dropout plates move back and forth on the frame, controlled with a captive barrel nut and screw for a minimal appearance. - Compatible with frames designed for the Alternator Flat Mount standard - Accommodates a 12mm thru-axle - Allows the rear axle to be adjusted through a 15mm range - Note: This part number only includes a single Alternator Flat Mount plate - Hardware kits (sold separately) must always be paired with the style of dropout plates being installed on the frame

Our Post-Lock is a bicycle rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. Post-Locks do not have a lip like our Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp. - NOTE: This IS NOT a seat collar and CANNOT BE USED to keep your seatpost in place - NOTE: NOT FOR USE with carbon fiber seatposts - NOTE: Please consult your seatpost manufacturer to check compatibility - Max torque 3–5Nm - AL-6061 Aluminum - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Available for 27.2, 30.9, and 31.6 mm diameter seatposts

Rack-Locks are one part form, two parts function. Sure, they still look great and do a great job of keeping your seatpost in place, but they also provide a mounting position for the front struts of a rack. - Max torque 3–5Nm - AL-6061 Aluminum - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Stainless steel pivot and bolt - Available in 30.0, 32.0, 35.0, and 35.4 mm sizes - Black anodized with laser-etched logo - 45g for a 32.0mm collar

Replacement swing plates for Alternator 1.0 dropouts.

Replacement swing plates for Alternator 1.0 dropouts.

Replacement swing plates for Alternator 1.0 dropouts.

Alternator Flat Mount is an adjustable dropout system designed to offer flawless functionality with flat-mount brakes installed. The dropout plates move back and forth on the frame, controlled with a captive barrel nut and screw for a minimal appearance. - Compatible with frames designed for the Alternator Flat Mount standard - Allows the rear axle to be adjusted through a 15mm range - Thru-axle diameter = 12mm; thread pitch = 1.5 - Note: This part number only includes a single Alternator Flat Mount plate - Uses Salsa 465 replaceable derailleur hanger (FS2322), sold separately. Also requires Salsa Axle Stud kit (FS1181) - Hardware kits (sold separately) must always be paired with the style of dropout plates being installed on the frame

Alternator Flat Mount is an adjustable dropout system designed to offer flawless functionality with flat-mount brakes installed. The dropout plates move back and forth on the frame, controlled with a captive barrel nut and screw for a minimal appearance. - Compatible with frames designed for the Alternator Flat Mount standard - Allows the rear axle to be adjusted through a 15mm range - Thru-axle diameter = 12mm; thread pitch = 1.5 - Note: This part number only includes a single Alternator Flat Mount plate - Hardware kits (sold separately) must always be paired with the style of dropout plates being installed on the frame

Replacement derailleur hangers for Salsa frames.

Need a non-quick-release seatpost collar with some major bling? Then Salsa's Lip-Locks are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette.

Lip-Locks secure your seatpost and add functional bling to your ride. - Non-quick release version of the Flip-Lock - Machined 6061-AL with stainless steel pivot and bolt - Anodized with laser-etched logo - For smooth operation, lightly grease the bolt threads

Replacement hardware kit for Salsa Alternator Flat Mount dropouts. - For use only on frames designed for the Alternator Flat Mount standard

Replacement rear dropout Axle Stud Kit for Carbon V2 Beargrease, Warbird, and Warroad Frames. - Thread diameter and pitch: 12x1.5mm

Chainstay protectors to guard your Salsa frame from scratches and damage.

Protect your downtube from scratches and damage with Salsa protectors.

Front Derailleur Mount for specific Salsa frame models. - Derailleur Mount Required for Direct Mount Front Derailleurs - Salsa Road Boost Front Derailleur Mount for 148 mm rear hub spacing - Enables installation of a braze-on front derailleur - Offset for 148 mm rear hub spacing - Replacement part for Cutthroat v2 frames - Wrap-around design provides additional derailleur stability - Interfaces with derailleur support bolt

Replacement derailleur hangers for Salsa frames. - Salsa Derailleur Hanger 1798