Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

Surly Constrictor Seatpost Clamp
$15.00 - $16.00
If you're suffering from a slipping seatpost, Surly has the remedy. The Constrictor Seatpost Clamp grabs your post tight and hangs on for dear life. It's machined from anodized aluminum billet, uses an 8mm bolt for ultimate strength, and can accommodate a rear cantilever brake hanger.
Surly Track Cog Lockring
$17.00
Surly Stainless Steel Track Lockring. - Fits all but Campagnolo, Miche or Phil Wood - 5mm thick with 0.65mm lip for maximum thread and lockring wrench contact
Surly Thru Axle
$24.00
Surly's low-profile, bolted Thru-Axles are specifically designed for use with Surly thru-axle compatible frames. Not sure which one fits your bike? Get in touch, and we'll ensure you're choosing the correct axle for your application.
Surly Tuggnut Chain Tensioner
$30.00
If you've got rear-facing horizontal dropouts and you don't want your chain to slip when your rear wheel pulls forward, then Surly's got you covered. The Tuggnut is made from investment-cast stainless steel and it'll hold your wheel in place. Plus, it comes with an adapter for quick release axles and features an integrated bottle opener.
Surly Chainring Guard
$45.00
Single chainring drive train setups are all the rage these days. With the introduction of exceedingly wide range 10- and 11-speed cassettes, the need for two chainrings has become a thing of the past. But when you only have one chainring, the only thing standing between you and a long walk back to the trailhead is you making sure you don't destroy your one chainring. That's why Surly made a chainring guard to fit O.D. cranks. It is made of aluminum and will take the hit for your chainring. It comes in 5 bolt, 94mm BCD and was designed to protect 22t – 30t rings.
Surly Singlespeed Spacer Kit
$45.00
Pair this kit with a cassette cog of your choosing (sold separately) and discover the joy and simplicity of a singlespeed without the cost of a new wheel. The Singlespeed Spacer Kit includes a variety of high quality aluminum spacers so you can dial your chainline and a stainless steel lockring to tighten everything down right.
Sunlite Crown Race 27mm
- Crown Race - Size: 27.0mm
Sunlite Derailleur Bracket Bolt & Nut
$1.59
- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame
Sunlite Keyed Lock Headset Washer
$2.00
- Type: Lock washer - Size: 1" Keyed
Sunlite V-Brake Cable Boot
$2.00
- Rubber - Color: Black
Sunlite Adjusting Barrel
$3.00
- Aluminum w/lock nut - 18mm long/6mm O.D.
Sunlite Lever Adjusting Barrel
$3.00
- For MTB levers - 7mm x 1mm - Aluminum construction
Sunlite Lever Adjusting Barrel OS
$3.00
- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction
Sunlite Crown Race MX
$5.00
- Crown Race MX - Size: MX TH 26.4mm
Sunlite Derailleur Hanger
$5.00
- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact
Sunlite Handlebar Shims
$5.00 - $8.00
- Alloy construction - Great for Cruiser or BMX bar conversions
Sunlite Alloy Seat Clamp
$6.00 - $10.00
• Aluminum clamp with a chromoly bolt
Sunlite Double Rail Saddle Clamp
$6.00
- Universal design double rail saddle clamp
Sunlite Alloy Seatpost Shims
$8.00
• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts
Sunlite Aluminum Brake Cable Hanger
$8.00
- Replacement front cable hanger - Aluminum construction
Sunlite Cartridge Bearings
$16.00
- DT Swiss cartridge bearings - Sold in pairs
Sunlite Sunlite Braze-on Adapter
$16.00
Sunlite braze-on front derailleur adapter
Sunlite Brake Pivot Bolt
$25.00
- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front
Shimano 10-Speed Chain Pins
$9.00
- Replacement chain pins for Shimano 11-speed chains - Compatible with CN7900/7801 chains - 3 pins per pack
Shimano 11-Speed Chain Pins
$11.00
- Width: 5.8 mm - Drivetrain Speeds: 11 - Color: Silver - Reusable: No
Shimano 7- and 8-Speed Chain Pins
$12.00
- Replacement chain pin for 7- and 8-speed Shimano chains - 3 replacement pins per pack
Shimano 9-Speed Chain Pins
$13.00
- Replacement pins for 9-speed Shimano chains - Compatible with CN-7700/HG92 chains - 3 replacement pins per pack
Shimano Dura-Ace R9150 Di2 Front Derailleur Braze-on Adaptor
$17.00
Shimano Front Derailleur Braze-On Adaptors allow you to run a braze-on style front derailleur on a frame that doesn't have a front derailleur braze-on mount. Multiple sizes cover fitment on most frames.
Salsa Derailleur Hanger
$20.00
Replacement derailleur hangers for Salsa frames. Mounting screws included. Hanger 257 Fits: Salsa Ala Carte Ti 2011, Salsa El Mariachi Ti 2010-2012, Salsa Fargo 2011-2013, Salsa Fargo Ti 2011-2013, Salsa Spearfish 2011-2013 with QR Rear Triangles, Salsa Vaya 2011+, Salsa Vaya Ti 2011-2012, Salsa La Cruz Ti 2011, Salsa Beargrease 2013, Salsa Warbird 2013-2015, Salsa Warbird Ti 2013-2015, Salsa Colossal 2013+, Salsa Colossal Ti 2013-2014, Salsa Mamasita 2012-2013, Foundry Chilkoot 2016 Hanger for 2014+ Split Pivot Frames Fits: all Split Pivot Horsethief, Pony Rustler, Spearfish Bucksaw and Deadwood Suspension Hanger for 2015 Beargrease 2 and Cogburn CB4 Fits: Cogburn CB4 and Salsa Beargrease 2 2015
Salsa QBP Derailleur Hanger 687 Black
$20.00
Fits: Salsa Colossal Ti 2015, Salsa Warbird 2016, Foundry Overland 2016.
Salsa Lip-Lock
$22.00
Need a non-quick-release seatpost collar with some major bling? Then Salsa's Lip-Locks are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette.
Salsa Lip-Lock Seat Collar
$22.00
Lip-Locks secure your seatpost and add functional bling to your ride. - Non-quick release version of the Flip-Lock - Machined 6061-AL with stainless steel pivot and bolt - Anodized with laser-etched logo - For smooth operation, lightly grease the bolt threads
Salsa Alternator 1.0 Right Plate
$30.00
Replacement swing plates for Alternator 1.0 dropouts.
Salsa Post-Lock Rack Mount
$32.00
Our Post-Lock is a bicycle rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. Post-Locks do not have a lip like our Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp. - NOTE: This IS NOT a seat collar and CANNOT BE USED to keep your seatpost in place - NOTE: NOT FOR USE with carbon fiber seatposts - NOTE: Please consult your seatpost manufacturer to check compatibility - Max torque 3–5Nm - AL-6061 Aluminum - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Available for 27.2, 30.9, and 31.6 mm diameter seatposts
SRAM Power Link Chain Connector
$5.00
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
SRAM PowerLock Chain Connector
$5.00
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
SRAM PowerLock Eagle Chain Connector 12-Speed
$5.00
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
SRAM Flat Mount Disc Caliper Bracket Bolts
$6.00
Flat Mount Disc Caliper Bracket Bolts
SRAM 94/107 BCD Steel Chainring Bolt Kit
$9.00
- Chainring bolts for Rival D1 2x cranks
SRAM Flat Mount Disc Brake Adaptor
$17.00
Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts
SRAM Trigger Clamp/Bolt Kit For X0 X9 X7
$22.00
Trigger Clamp/Bolt Kit For X0 X9 X7
SRAM Braze-on Front Derailleur Clamp with ChainSpotter Stop
$30.00
Clamp allows use of a braze-on derailleur on frames without the braze-on tab. Includes a tab to use SRAM's lightweight and easy-to-adjust chain control device. - Fits all SRAM road braze-on front derailleurs - ChainSpotter not included
RockShox 1/2-inch Eyelet Bushing
$6.00
RockShox, 11.4115.013.000, Eyelet Bushing 1/2X1/2 QTY 2
RockShox Reverb Hose Barb Remote
$7.26
Replacement Remote-end Hose Barb for RockShox Reverb dropper seatposts. - Fits all generations of Reverb
RockShox Reverb Hose Barb Post
$9.08
RockShox Reverb Hose Parts
RockShox SKF Wiper Seal Kit
$16.00
Upgrade your suspension fork with ultra-low friction wiper seals providing unmatched suspension feel, all while keeping the dirt where it belongs- because no one wants dirt in there.
RockShox SKF Wiper Seal Kit 35mm
$27.00
- Upgrade your suspension fork with ultra-low friction wiper seals providing unmatched suspension feel, all while keeping the dirt where it belongs- because no one wants dirt in there
RockShox Dust Seal and Oil Seal Kit for Argyle, Boxxer, Pike, Reba, Recon, Revelation, Tora
$31.00
- 28mm for Dart, Judy, J2, J3, Pilot,Sid (pre-2008) - 32mm for Argyle, Boxxer (pre-2009), Pike, Reba, Recon, Revelation, Tora - 35mm for Domain, Lyrik - 40mm for Totem
Ritchey Derailleur Hanger For Steel Frames
$26.95
Replacement Derailleur Hanger for Ritchey thru-axle Steel Frames - Steel Outback - Steel Outback Break-away - Road Logic Disc - Swiss Cross Disc V2 - Ultra
Problem Solvers Bottom Bracket Cable Guide
$4.99
Single sided, bottom bracket mounted cable guide, with integrated cable housing stop. - Intended to fit 40mm diameter bottom bracket shells - Includes M5 mounting bolt - Direct replacement for: Salsa Vaya, Salsa Warbird (Alloy), Salsa Journeyman, All-City Cosmic Stallion, - All-City Gorilla Monsoon, All-City Macho King, All-City Space Horse Disc
Problem Solvers Clamp-On Water Bottle Cage Mount
$6.00 - $9.00
The Problem Solvers Clamp-On Water Bottle Cage Mount makes it easy to carry a bottle on your handlebars so you can have even more refreshment on rides. It also comes in useful on frames without room for bottles, like smaller frames and some kid’s bikes.
Problem Solvers Seat Binder Bolts
$8.00
Notched binder bolts for frames with integrated seat collars. Details: CroMoly steel bolts Three lengths available: 16, 19 and 21mm 8mm diameter
Problem Solvers Standard Top Cap
$8.00 - $12.00
The Problem Solvers Standard Top Cap is a light, durable aluminum top cap for threadless headsets. These caps fit all forks.
Problem Solvers Handlebar Clamp Shim
$9.99 - $13.00
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.
Problem Solvers Seatpost Shim
$9.99 - $10.00
The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.
Problem Solvers Hydraulic Brake Hose Guides
$10.00 - $16.50
Problem Solvers has a couple different options for adding cable housing or brake hose guides to your bike. Choose from the adhesive stick-on option or the guide that mounts to existing housing stops.
Problem Solvers Single Chainring Bolts - 6mm
$10.00 - $15.00
The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
Problem Solvers Inner Chainring Bolts - 16mm
$14.99
The Problem Solvers Inner Chainring Bolts include 5 of the special threaded chainring bolts that fit into the chainring nuts on your crankset to hold the chainrings in place (chainring nuts sold separately). This type is 16mm long and made of rustproof stainless steel.
Problem Solvers Double Chainring Bolts Dual Hex Head - 8mm
$15.00 - $17.99
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of aluminum and feature dual-hex heads for easy, secure installation.
Problem Solvers Locking Headset Spacer
$16.00
The Problem Solvers Locking Headset Spacer is handy during headset servicing for keeping the fork in place when the top cap and stem are removed. It's also great for keeping the fork in the frame when you're shipping your bike in a box, which usually requires removing the stem and bars. This quality piece is for 1 1/8-inch forks and is CNC machined of light, durable 6061 aluminum and has a stainless-steel bolt.
Page 1 of 3 Next page