Filter By:
- Rigid (65)
- Suspension (76)
- Show More Brands
- Show Fewer Brands
Forks
$329.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most crucial component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high loads. Those muscular shoulders aren’t just for looks, as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork is tailored for mid-sized racers and includes a lighter weight 1 inch 7000 series aluminum steerer tube and 10mm cold-forged dropouts.
Weight Limit: 45 kg (99 lbs) or less with limitations as per Category 1 of EN 16054:2012 Standard
FEATURES
- 7075-T6 Aluminum Standard 1” Steerer Tube to Accommodate Mid-Sized Racers
- Designed for 10mm Axle Conventional Hubs
- Internal Butterfly for Added Durability at Steerer Tube and Fork Crown Interface
IMPORTANT NOTES
- Includes Box One™ Stem Lock
- Note: Use of a star nut voids the warranty for this product.
COMPATIBILITY
- Box One Stem Spacers
- Box Two Stem Spacers
- Box Two Threadless Headset
- Box Two 1" Integrated Headset
- Box Two 1" Integrated Conversion Headset
- Box Two Headset Adapters
- Box Two Top Load 1" Stem
- Box Hex Lab 1" Stem
- Box Two Center Clamp 1" Stem
$329.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork is tailored for larger-sized racers and therefore includes a lightweight 1-1/8 inch 7000 series aluminum steerer tube and 10mm cold-forged dropouts.
Weight Limit: 115kg (253 lbs) with limitations as per Category 2 of EN 16054:2012 Standard
FEATURES
- 1-1/8 Inch 7000 Series Aluminum Steerer Tube
- Standard Size Fork for Larger-Sized Racers
- Internal Butterfly Steerer Tube and Fork Crown Interface
- 10mm Standard Dropouts
- Cold-Forged and Bonded Dropouts
COMPATIBILITY
- Box Two 1.1/8" Integrated Headset
- Box One Carbon 45x45 1.1/8" Integrated Headset
- Box Two Threadless Headset
- Box Two Headset Spacers
- Box One Front Load Stem
- Box One Top Load Stem
- Box Two Front Load Stem
- Box Two Top Load Stem
- Box One Delta Stem
- Box One Center Clamp Stem
- Box Two Center Clamp Stem
SPECIFICATIONS
- 20 Inch 24 Inch
- Material High Modulus Unidirectional Carbon Fiber Construction
- Steerer Material 7000 Series Aluminum
- Finish High Gloss Black
- Offset 32mm
- Steerer Tube 1-1/8 Inch
- Weight
- 20": 560g / 19.75oz
- 24": 585g / 20.7oz
$379.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high loads. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork pushes our Oversized Technology to the extreme as it includes the 1.5 to 1-1/8 inch tapered 7000 series aluminum steerer tube and stiffer 20mm through-axle cold-forged dropouts. Say goodbye to deflection.
Weight Limit: 115kg (253 lbs) with limitations as per Category 2 of EN 16054:2012 Standard
FEATURES
- Oversized Technology™
- Tapered Steerer Tube to Reduce Deflection
- 20mm Through Axle to Increase Responsiveness
- Internal Butterfly for Added Durability at Steerer Tube and Fork Crown Interface
$144.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. Investment cast 1pc drop outs for maximum strength and a super sleek finish. 1-pc machined steerer tube with an integrated bearing race, tapered legs, and tire clearance for big tires. Lifetime warranty.
$144.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. Investment cast 1pc drop outs for maximum strength and a super sleek finish. Features an updated top cap retention design.
- 1-pc machined steerer tube with an integrated bearing race
- Tapered legs
- Tire clearance for 2.40” tires
- Updated top cap retention design
$169.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. 1-pc machined steerer tube with an integrated bearing race, tapered legs, and plenty of tire clearance.
$1,099.99
The Cane Creek Helm MKII Air Suspension Fork features an upgraded damper design for increased support and control and a redesigned air spring that allows for increased air volume for better traction and suppleness.
- D-Loc 15mm bolt-on thru-axle
$299.00
The most iconic fork in the Columbus carbon range: clean, elegant lines, the Minimal is a monocoque carbon fork designed for frames with traditional steerers and satisfies a variety of rakes and steerer diameters.
The Minimal fork, in fact, is available both in a standard 1-1/8” diameter as well as in a 1” version, as well as the option of a traditional 45mm or 50 mm rake. Whether it’s a lugged or TIG welded frame, a standard geometry, or a frame designed for a small-statured rider, the Minimal fork offers a wide range of options, providing frame builders and riders with the best structural solutions and performance possible.
A Timeless model, the Minimal is adopted by classic traditional frame builders using standard tubing, as well as modern constructions using shaped and oriented tubes.
- T700S monocoque carbon fiber
- 300mm straight 1 or 1-1/8 carbon steerer
- Clearance for up to 25c tires
- 9x100mm aluminum dropouts
- 45mm rake
- 340g
$299.00
The most iconic fork in the Columbus carbon range: clean, elegant lines, the Minimal is a monocoque carbon fork designed for frames with traditional steerers and satisfies a variety of rakes and steerer diameters.
The Minimal fork, in fact, is available both in a standard 1-1/8” diameter as well as in a 1” version, as well as the option of a traditional 45mm or 50 mm rake. Whether it’s a lugged or TIG welded frame, a standard geometry, or a frame designed for a small-statured rider, the Minimal fork offers a wide range of options, providing frame builders and riders with the best structural solutions and performance possible.
A Timeless model, the Minimal is adopted by classic traditional frame builders using standard tubing, as well as modern constructions using shaped and oriented tubes.
- T700S monocoque carbon fiber
- 300mm straight 1 or 1-1/8 carbon steerer
- Clearance for up to 25c tires
- 9x100mm aluminum dropouts
- 45mm rake
- 340g
$319.99
Omnium, scratch, pursuit, points, time-trial: from the inspiring Vigorelli Velodrome of Milan, the temple of international cycling and historical birthplace of the Columbus brand, the Pista Leggera is a fork that encompasses both the spiritual & performance attitudes that rode this famed track.
An oversized, heat-treated, CNC-machined aluminum head provides stability and precision and is seamlessly integrated with aerodynamic, high-modulus carbon-fiber blades. The Pista Leggera has a classic 35mm rake, providing enhanced responsiveness even in narrow and fast trajectories. Pista Leggera is the pinnacle of research and development at the Columbus Carbon Lab and is adopted by many professionals for their track frames. The Pista Leggera is also available in a caliper brake version, providing you with the possibility of mounting a brake during training sessions on public routes.
- T700 monocoque carbon fiber blades
- 300mm tapered aluminum steerer
- Clearance for up to 25c tires
- 9x100mm aluminum dropouts
- 35mm rake
- 560g
$339.99
SL. Super Light.
A Columbus icon, at the peak of carbon technology. Taking the most popular aspects of the Futura Caliper fork, the first of its kind and precursor of the Futura family, we’ve remodeled the geometry and oversized steerer to offer a classic 1-8” fork diameter.
Tradition, History, and Innovation.
Today, most up-to-date road bicycles have a wider tire clearance. This new standard has inspired us to design the Futura SL with a wider tire clearance; aerodynamic and well-balanced, the increased clearance allows you to mount tires up to 28mm.
Control, Reliability, and Compatibility.
The key concepts on which we have designed and developed the entire Futura line. The SL has lightweight tapered fork blades, in part clean and straight, in part elegantly curved, designed to match flawlessly with the shapes and lines of the latest carbon frames as well as the more slender and prestigious steel, titanium, and aluminum frames.
The Futura Caliper SL fork is made with high-modulus T700 monocoque carbon fiber. The special CNC machined shim integrated into the base of the steerer tube guarantees increased functioning with the headset and bearings, reducing vibrations, maintenance, and unnecessary stress on the frame. The SL fork enriches the Futura range; expanding the selection of steering diameters, while still offering the important choice of a 45mm or 50mm rake. The option of a 45mm or 50mm rake provides frame designers with more freedom to design when it comes to geometry, angles, or overlap.
For cyclists, the SL fork provides an optimized handling experience ensuring riders of all statures will find the perfect fit.
- T700S monocoque carbon fiber
- 300mm straight carbon steerer
- Clearance for up to 28c tires
- 9x100mm carbon fiber dropouts
- 330g
$379.00
Road-race. Specific. Performance.
Futura Caliper is the most updated creation of the Columbus Carbon Lab department for lovers of the traditional caliper brake. The all-new Futura range completes its offer with an exclusive fork, designed for the rider, starting from bike geometry and biomechanics requirements and needs. In fact, the Futura Caliper is the only oversized 1-1/2” tapered fork with multiple-rake: 45 and 50mm options that allow the cyclist, and even before him, the framebuilder, to properly complete their bicycles with the proper geometry and solutions, according to body requirements, sizes and riding style.
Realized using ultra-light aerospace carbon fiber, Futura Caliper offers an extremely sharp riding experience thanks to its oversized sections and shapes, designed for an overall weight reduction of the structure, enhancing its stiffness and precision while cornering. The streamlined tapered front section, together with the curvilinear geometry of the blades, minimize aerodynamic resistance, granting a good vibration-dumping attitude, where, the overall aesthetic result, enhance Futura Caliper capability to perfectly match and complete the most updated carbon fiber frames as well as the new-generation hi-performance steel, alu and titanium designs.
- T700S monocoque carbon fiber
- 300mm tapered carbon steerer
- Clearance for up to 28c tires
- 9x100mm carbon fiber dropouts
- 350g
$499.00
- T700S monocoque carbon fiber
- 300mm tapered carbon steerer
- Clearance for up to 28c tires
- 12x100mm carbon fiber dropouts with aluminum inserts
- 45mm rake
- 440g
$549.00
The family grows and together with the Disc and Gravel models, the Futura Cross model completes the range of disc brake solutions for off-road enthusiasts whether it be pure cyclocross, b-roads, or off-road adventures.
The famous lines of the Futura fork are widened and lengthened on the Futura Cross fork to allow riders to mount larger, more tasseled tires. The Futura Cross fork can mount up to 47mm tires on 700c wheels, but more interesting is the option of mounting 27.5” wheels with a 2.1” tire; a standard tire choice that is becoming the choice of more and more gravel and monster-cross riders. Following industry standards, the fork is designed for 12mm thru-axles and flat-mount disc brakes to ensure compatibility with the majority of modern road and cyclocross disc-brake groupsets.
Further increasing the range of steerer options within the Futura line, the 1.5” oversized steerer is synonymous with stability and durability, desirable traits on uneven or slippery terrain. The external cable guides are designed to make it as easy as possible to mount and maintain the fork and braking system, facilitating the cleaning and care of your fork and headset. The built-in eyelets near the dropouts give you the option of mounting a front mudguard which, when not being used, is closed with flathead screws that disappear into the lines of the fork creating a seamless and elegant continuity.
Last but not least, the innovative Multi-Rake system provides frame designers with more freedom to design when it comes to geometry and trail, and an adjustable set-up based on use and choice of tires ensures riders will find the perfect fit.
- T700S monocoque carbon fiber
- 300mm tapered carbon steerer
- Clearance for tires up to 700x47c or 27.5"x2.1"
- 12x100mm thru-axle, carbon fiber dropouts with aluminum inserts
- Two position axle inserts allow for either 47mm or 52mm rake
- Flat mount disc brake compatible with rotors up to 180mm
- Internal cable routing for a clean appearance
- 450g (±10g)
$599.00
On-Road, Off-Road, All-Roads!
Futura Gravel is the newest solution to the growing hybridization of road race and outdoor worlds, merging urban with nature, for all those cyclists in search of an all-round fork strongly declinable in contexts and uses.
From white roads to single tracks, from unpaved paths to city-scapes, Futura Gravel allows a very wide range of possible uses, thanks to its specific geometries and features. Oversized clearances and spaces, grant compatibility with knobby tires up to 40mm, able to face the most demanding off-road conditions. If used in wet conditions, adventurers and commuters can benefit from Futura’s capability to host fenders, thanks to its integrated hidden eyelets, maintaining enough clearance to roll up to 35mm tires even while using mudguards.
Whether on-road or off-road, dry or wet, disc brake guarantees performance and reliability: designed around the latest flat-mount & thru-axle standards, Futura Gravel grants the possibility to host up to 160mm rotors, for a very powerful braking experience. The tapered 1-1/4” steerer optimizes riding stability, matching the benefits of oversized lightweight sections to the capability to absorb and map even the most impervious trails, while, in terms of aesthetics, matches perfectly both the carbon-fiber as well as steel, alu, and titanium frames, with standard or oversized tubes and dimensions.
Finally, the 380mm axle-to-crown fork height, ensures a lower center of gravity, enhancing stability and proportions on a wider range of frame sizes and geometries.
- T700S monocoque carbon fiber
- 300mm tapered carbon steerer
- Clearance for up to 40c tires or 35c with fenders installed
- 12x100mm thru-axle carbon fiber dropouts with aluminum inserts
- Flat mount 160mm disc brake with internal cable routing
- 450g
$1,199.00
Experience incredible steering precision, small bump sensitivity, and absolute control with the new Onyx 38. A unique E-Designed chassis, wider-than-ever stance, and burly 38mm stanchions launch the Onyx into a new era of MTB Suspension.
All new demands require all new thinking. The Onyx D1 38 sets a new standard in E-Designed suspension. What does it mean to be specifically E-Designed? For years, the market has taken “acoustic” suspension and made after-thought upgrades in order to make it “E-Bike Approved”. Bumping up compression damping, using a slightly thicker crown, or just saying “Add 10 PSI” isn’t doing it right. E-Specific design means we thought about these needs from day one. How can we make a fork flex equally as one unit? How can we achieve unreal steering precision without the harshness or deflection? How can we control the fore and aft flex issues the added weight of an e-bike puts on a fork? Questions like these were the foundation, the bones of this concept. After years of engineering, different thinking, and countless hours testing, we nailed it. The final result wasn’t only a fork that met all the requirements and needs of a modern, aggressive E-bike, but it directly translated to a regular bike.
NOT ONLY IS THIS THE PINNACLE OF E-BIKE SUSPENSION, IT’S THE NEW STANDARD FOR SUSPENSION.
- Burly fork designed for the rigors of E-Bike use, providing steering precision without harshness or deflection
- OTT (Off The Top) is an adjustable coil negative spring that allows the rider to dial in initial compliance without affecting the mid and end stroke
- The D1 damper features updated high-flow compression and rebound porting to allow a linear suspension dynamic. This initial damping support without any high-speed harshness paired with a 30% increased volume in the Compression Bladder System results in increased small bump sensitivity and damping consistency
- High flow linear rebound update increases response without a loss of control or damping
- A purpose-built crown increases drop for extra down tube clearance and features a dual hollow bore design with strategically varied wall-thickness for improved stiffness and strength
$89.99
- Forged dropouts with eyelets, straight-gauge oval tapered blades
- Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing
- 85mm threaded section
- Fits up to 30c tires
- Axle to Crown Length: 382 mm
- Brake Mount (Fork): Long Reach Caliper (55mm - 73mm)
- Crown Race: 27
- Front Axle: 9mm x 100mm
- Material: Steel
- Offset: 50mm
- S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill
- Steerer Type: Straight
- Weight: 839g, 876g, 907g
- Wheel Size: 27"
$450.00
ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness.
When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.
$550.00
A purpose built carbon fiber fork for gravel and cyclocross applications featuring internal hose routing, flat mount brake compatibility, and clearance for up to 50mm tires. This fork is perfect for gravel riders looking for more clearance, weight savings, compliance, and the versatility of fender mounts to enhance their gravel grinding experience.
- Material: Carbon
- Weight: 520g
- Steer Tube Length: 350mm
- Rake: 50mm
- Axle To Crown: 395mm
- Max Rotor Size: 140mm – 160mm
- Max Tire Clearance: 700c x 50c, 27.5 x 2.25-inch
- Crown Race Diameter: 1.5-inch
- Torque Spec - Steer Tube: 5.5Nm
- Torque Spec - Axle: 8Nm
$575.00
The ultimate aftermarket disc brake specific road cycling fork featuring 32mm of tire clearance and solid 12mm thru-axle for secure and confident handling. Building upon nearly a decade of experience making the world's best forks, ENVE's latest road disc fork features a modern 32mm of tire clearance, a low axle-to-crown height of 370mm, internal hose routing, and a lightweight one-piece form construction developed specifically to handle the demands of disc brakes, rough roads, and large volume tires.
- Material: Carbon Fiber
- Steerer Tube Length: 350mm
- Rake: 43, 50mm
- Axle to Crown: 370mm
- Brake: Disc
- Axle Compatibility: 12mm
- Max Rotor Size: 160mm
- Max Tire Clearance: 32mm
- Crown Race Diameter: 1.25
- Torque Spec: Steer Tube: 5Nm
- Torque Spec: Axle: 8Nm
- Weight: 425g
$625.00
A truly all season, all terrain fork for fat-bikes with maximum tire clearance. This fork utilizes a reversible drop-out chip that adjusts the rake, allowing for multiple wheel sizes. With over 10 years of carbon experience, ENVE is the trusted source for many when it comes to forks. After creating the most innovative rigid mountain fork in the market, we set our sights on fat bike forks. Like all ENVE Forks, the Fat Fork is molded in one-piece from the steerer to the drop-outs and utilizes a reversible chip to adjust for optimized handling with 26 or 27.5-inch wheels. Adding trusted reliability and lightweight design to 5-inches of tire clearance, this is the upgrade to have for your all-season rig.
- Material: Carbon
- Weight: 748g
- Steer Tube length: 350mm
- Rake: 42mm, 51mm (adjustable)
- Axle To Crown: 488.8mm
- Max Rotor Size: 160mm - 203mm
- Max Tire Clearance: 5.2-inch
- Crown Race Diameter: 1.5-inch
- Torque Spec – Steer Tube: 5.5Nm
- Torque Spec - Axle: 8Nm
$650.00
Riding rigid isn’t for everyone, but for those who value functional simplicity, the updated ENVE Mountain Fork delivers.
BOOST (15X110MM)
- Material: Carbon
- Accessory Mounts: Yes
- Weight: 719g with Fender, 676g (w/ clasps)
- Travel Correction: 120mm (Compatible with frames designed around 100mm-140mm Travel Forks)
- Steerer Tube Length: 300mm
- Rake: Adjustable – 44mm, 52mm
- Axle To Crown: 490mm – 44mm Rake Position; 492mm – 52mm Rake Position
- Brake: Disc
- Brake Mount: Post Mount
- Axle Compatibility: 15 x 110mm
- Max Rotor Size: 180mm
- Max Tire Clearance: 29 x 3.0” with Fender
- Crown Race Diameter: 1.5”
- Torque Spec: Steerer Tube: 5.5 Nm
- Torque Spec: Axle: 8 Nm
$27.00 - $29.00
Service your suspension fork with Enduro Seal KIts.
- Custom made for each make and model of fork
$769.00
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor.
- Black anodized upper tubes
- 32 mm upper tubes and ample bushing overlap for a quality ride
- Hollowed out lower legs provide even more weight savings
- FIT GRIP damper and FLOAT air spring
- Performance Series black-on-black graphics package
$989.00
The 38 Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately.
- Black anodized upper tubes
- FIT GRIP damper and FLOAT EVOL air spring
- Three on-the-fly compression damping positions: Open, Medium, Firm
- Performance Series black-on-black graphics package
$1,069.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
$1,079.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
- Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$1,089.00
The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths.
- Step-Cast chassis
- Genuine Kashima Coating on upper tubes
- FIT4 damper and FLOAT EVOL air spring
- Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities
- Kabolt Thru Axle
$1,139.00
36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses.
- Genuine Kashima Coating on upper tubes
- FIT GRIP2 Damper and FLOAT air spring
- E-Bike Chassis
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
$1,139.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
Page 1 of 5
Next page