Filter By:
Cables
$14.99
Jagwire's Alloy Straddle Cable Carrier w/Liner is a nice upgrade for your cantilever brakes. It's made of light and durable aluminum and has a liner for smooth action.
$9.00
Fittings for converting open loop housing holders on a frame to traditional cable stops.
- Fits snugly inside open loop and receives 5mm housing with no end cap
- Large flange for larger hydraulic loops
- Flattened on one side to accommodate frame
$9.00
Jagwire's Aluminum Housing Connectors allow joining two sections of the same-size cable housings together in case you only have shorter sections and you need to make a longer one. It comes in 4 and 4.5mm diameters. Match the diameter of the housing sections on your bike.
- Comes in a pack of 10
$5.00 - $6.00
These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head.
- Galvanized
- Pre-stretched
- Double ended
- Cable Head: Shimano/SRAM, Huret/Simplex
- Defined Color: Silver
- Diameter: 1.2mm
- Double Ended: Yes
- Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters
$21.99 - $22.00
Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.
$13.00
Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips.
- Aluminum model accepts lines up to 5mm in diameter and the lines snap in.
- Stainless model grips fully around the lines and is adjustable to fit most diameters.
$40.00
Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.
$10.00
Extend housing runs using these double-ended junction end caps.
$11.00
Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel.
Included in this kit:
- 6 x 5mm EZ-Bend segments
- Flexible segments slot between road shifter hoods and Pro Compressionless housing run to allow for an appropriate bend at the handlebars
$10.00
Housing liner provides an extra line of protection between cables and housing.
- Bridges gaps between housing segments
$30.00
Many frames use internal cable routing for a tidy appearance and improved aerodynamics. In some cases, this can cause unwanted rattling sounds when riding over rough surfaces. Jagwire's Internal Housing Damper slides over brake and shift housing or hydraulic hose to reduce this noise.
- 10mm outside diameter
- Compatibility: 4.0-5.0mm brake housing, shift housing, and hydraulic hose
$12.99
Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
$13.00
Jagwire's Mickey Adjusting Barrels are quality adjusters that mount to most road frames. They make it easy to fine-tune your shift cable tension by hand for optimum shifting performance.
$15.00
Pro level Teflon coated brake cables minimize friction to maximize snappy braking response.
- Die-extruded and pre-stretched for smooth operation and durability
- Stainless steel construction resists corrosion
- Best used with Slick-Lube housing and nosed end caps
- Double-ended SRAM/Shimano mountain and road compatible cable ends
$50.00
With more disc brake platforms on the market than ever before, fitting hydraulic hoses can be complex and frustrating. That’s why we developed the Quick-Fit Hydraulic Hose adapter system, a foolproof approach utilizing proven caliper-adapter technology from the motorcycle world. Pro universal hoses makes it safe and easy to dial in a perfect fit.
Simply select a Pro hydraulic hose and match it with a compatible Mountain Pro Quick-Fit adapter kit. It’s that easy. Pro Hydraulic Hoses come in a wide array of colors. Pro Quick-Fit adapter kits are available separately in convenient packaging for the most popular brake manufacturers and models.
- A Kevlar weave surrounding the liner prevents bulges due to heat buildup and extreme pressure
- Each hose has 2 caliper-side universal couplers that connect to the Quick-Fit Adapters (sold separately)
- Mountain Pro hydraulic hose kits are available in 12 colors and finishes
- Black kits contain gloss black housing with silver logos; Stealth Black kits have matte black housing featuring black logos
$43.99 - $59.99
Jagwire's Open End Caps are quality metal ferrules that put the finishing touch on your brake cable housing sections. They reinforce them so they stay straight and allow the cables and brakes to operate as smoothly as possible.
$30.00 - $64.99
Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.
$18.00
Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy.
- 5mm
- Stronger detent mechanism for use with brake housing
- Perfect for mechanical disc brakes
$44.99
Jagwire's Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of shift cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in Gold and Silver so they also add a little style to your bike.
- Each Bottle contains 500 tips
$32.00
Jagwire Sport DOT Hydraulic Hose Kits feature a durable, flexible reinforced layer surrounding a low-friction inner tubing to deliver light brake lever action and trustworthy braking power. Offered as single hose kits for individual brakes or in bulk boxes for workshop use, Sport FOT Hydraulic Hose is available for most popular road and mountain hydraulic disc brake systems that use DOT brake fluid.
- High performance hydraulic hose provides effective braking power and control
- Kits include hose and necessary fittings for one brake lever and caliper system
- Contains 2000mm HFK hydraulic hose, needle insert, compression bushing, compression nut and seals for the listed compatible brake models
- Compatible with SRAM Guide (A1 calipers), Level TL, DB5, and similar brakes
- For use with DOT 3, DOT 4 or DOT 5.1 brake systems only
$15.00
Rocket II direct cable adjusters fit into Shimano STI shifters with external shift cable routing.
- Rubber coated adjusting knobs for firm grip
- Adjustable on the fly
- 4mm
$15.00 - $17.00
Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.
$32.00
Jagwire Sport Mineral Hydraulic Hose Kits feature a durable, flexible reinforced layer surrounding a low-friction inner tubing to deliver light brake lever action and trustworthy braking power. Offered as single hose kits for individual brakes or in bulk boxes for workshop use, Sport Mineral Hydraulic Hose is available for most popular road and mountain hydraulic disc brake systems that use mineral oil brake fluid.
- High performance hydraulic hose provides effective braking power and control
- Kits include hose and necessary fittings for one brake lever and caliper system
- Contains 2000mm HPP hydraulic hose, needle insert, compression bushing, compression nut and seals for the listed compatible brake models
- Compatible with Shimano Dura Ace (R9120, R9170), Ultegra (R8020, R8070), 105 (R7070), GRX (RX810, RX400), and similar brakes
- For use with mineral oil brake systems only
$6.00
Jagwire's Sport Slick Galvanized Shift Cable is a fine shift cable made of galvanized steel for optimum shifting performance and durability.
$15.00
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables.
- Slick cables are die-extruded for smooth operation
- Pre-stretched
- SRAM/Shimano mountain compatible cable end
- Stainless steel construction resists corrosion
- Single end cable features weld-cut for easy installation
$11.00
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables.
- Slick cables are die-extruded for smooth operation
- Pre-stretched
- Double-ended SRAM/Shimano mountain and road compatible cable ends
- Stainless steel construction resists corrosion
- Double Ended: Yes
- Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain
- Defined Color: Silver
- Quantity Included: 1
$5.49 - $12.00
Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.
$10.99
Jagwire's Straddle Cable Carrier is for cantilever and centerpull brakes. It attaches to the end of the brake cable and is what the brake's straddle (also called transverse or crossover) cable attaches to. The Straddle Cable Carrier is made of light, corrosion-resistant and durable aluminum with a steel bolt. You get a pack of 10.
$5.00
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.
$34.99
Road Pro Brake kits offer enhanced performance and style. Like Road Pro Brake kits, Mountain Pro Brake kits are sold separately from our Pro Shift kits so you can create the best color combination for your bike. Pro level polished brake cables used with our Slick-Lube liners dramatically reduce friction while Kevlar reinforced, compressionless brake housing delivers smooth, powerful braking performance. And with all needed parts included, Jagwire's Mountain Pro Brake kits are easy to install.
- Pro level polished cables combined with Slick-Lube, Kevlar reinforced housing enhance braking performance
- All parts needed for a complete brake cable and housing install on road bikes are included
- Kits provide longer housing and cables for large frame with full housing or mechanical disc brakes
Page 1 of 1