Skip to main content


*** JOE BIKE WILL BE OPEN ON MEMORIAL DAY FROM 10AM TO 4PM ***

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

FSA SL-K BB392 Tandem Crankset
$382.99 - $543.99
The FSA SL-K carbon tandem cranks feature an asymmetrical modular compact 2 x 11-speed spider, 30mm spindle, and tons of adjustability. - Hollow carbon arms with UD carbon finish - Asymmetrical 110 A.B.S BCD achieves 4 chainlines (44,47,50,53) - English BB included - 104 BCD timing spider - 653 grams - Number of Chainrings: Single - Crank Intended Use: Tandem - Pedal Spindle: 9/16" - Rings: 38 - Spindle Interface Type: 392 EVO - BB Included: English
Whisky Parts Co. No.9 Fat Fork Carbon Mountain
$540.00
Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Fat Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough terrain, so you experience an astoundingly plush ride with precise handling. They've accomplished this by using a delightfully stiff and compliant UD carbon fiber construction, a tapered steerer, and a 15 x 150mm thru-axle. It all results in an enhanced riding experience and adds up to performance that you can count on. - Post style brake mount - DT RWS Axle included - UD full carbon construction - Axle to Crown Length: 480mm - Brake Mount: Post Mount 160mm - Crown Race: 40 - Front Axle: 15 x 150mm - Material: Carbon - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: 1-1/8 – 1-1/2-inch tapered - Weight: 750 grams - Wheel Size: 26-inch
Fox Racing Shox FLOAT DPX2 Factory Three-Position Imperial Rear Shock
$539.00
Our most advanced lightweight trail shock. An entirely new base valve design and the addition of a valved circuit in open mode raises the already high bar for trail category performance. "Factory" says it all—feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Advancing trail shock technology, the DPX2 combines the best of both X2 and DPS, featuring a recirculating oil damper design with the convenience of three on-the-fly compression damping positions. - Genuine Kashima Coat on air sleeve and body - X2 small bump sensitivity meets an improved DPS adjustment range - Recirculating oil damper design gives riders better control - One-piece EVOL air sleeve improves responsiveness and sensitivity
RockShox Reba 26
$537.00
Little riders with big dreams. Until now, a premium fork was tough to find for smaller riders. Welcome Reba 26, a fork specifically tuned for lighter riders to simplify the ride experience and allow for a lower pressure range. Features - New graphics are easy to read and make a fresh impact - Specifically tuned for smaller riders - External rebound adjustment - Offset: 40mm
RockShox Reba RL
$537.00
One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from SID. It features a chassis that combines classic XC performance with light trail duties, while a Motion Control damper completes the package, making Reba more capable than ever before. Features - New graphics package for a fresh, premium look - Highly tunable Solo Air spring - TwistLoc and OneLoc remote compatible
RockShox Reba RL
$499.00 - $537.00
One of the most successful and hard-working RockShox forks of all times capitalizes on the innovations born from the latest SID. A chassis that combines classic XC performance with light trail duties and a Motion Control damper completes the package, making Reba as capable as ever before. - Proven Motion Control damper featuring low speed compression adjust to lockout with external rebound adjust - Torque Caps compatible for a stronger, stiffer interface between fork and hub, giving you more control in the front wheel - Accepts Bottomless Tokens to easily custom tune the air spring performance to best match you own riding style and suspension preference - Solo Air spring for a plush, predictable ride you can set up in seconds
RockShox Reba RL 26-inch
$537.00
The Reba is no prima donna. Even though it's available with a host of race-worthy technologies, this cross country fork doesn't need the promise of a podium to give its all. It expects to be ridden every day, which is just what you'll want to do once you experience its supreme versatility. From quad-burning climbs to grin-inducing descents, the Reba is the ultimate trail warrior for daily duty. - 9mm QR - 40mm offset
RockShox Revelation RC
$537.00
Revelation is all grown up and ready to explore, wherever the trail may turn. Value-packed, the Revelation features an updated DebonAir spring paired with a Motion Control damper and 35mm Fast Black upper tubes. - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Motion Control damping featuring low-speed compression adjustment to firm - Chassis is derived from the renowned Pike fork - New graphics package for a fresh, premium look
RockShox Yari RC
$537.00
Yari shares the stiff, hard-hitting chassis as the Lyrik and combines it with the updated DebonAir air spring and proven Motion Control damper. The Yari fork is designed to inspire confidence for those hard-hitting enduro and E-MTB riders alike. - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - New graphics package for a fresh, premium look - Motion Control damping featuring low-speed compression adjustment
FSA K-Force WE Crankset
$531.99
This Hollow Carbon Crankset features reduced weight, and excellent stiffness. The K-force WE system is perfect for triathlon and/or time trial riders who want advanced technology without the bulk. - Lightweight hollow carbon arms with UD carbon finish - Maximum frame compatibility with a forged AL7050 BB386EVO spindle - Innovatively designed for a better ride, the variable thickness means that it’s reinforced at critical stressed areas and reduced in other areas for lighter weight - Chainring pins are AL7075 forged then 100% CNC 3D machined, to increase outer chainring stiffness and provide efficient up-shift pin design for full-power performance - AL7075 Torx T-30 alloy chainring bolts - Number of Chainrings: Double - Crank Intended Use: Road, Tri - Pedal Spindle: 9/16" - Rings: 50/34 - Spindle Interface Type: 386 EVO - Drivetrain Speeds: 11 - Chainring BCD: 110 - Weight: 534 - BB Included: No
Ritchey WCS Carbon Disc Road Fork
$529.95
The one-piece carbon monocoque WCS Carbon Disc Road Fork has been meticulously engineered and painstakingly built to perform with razor-sharp accuracy, offering a comfortable yet lively riding experience. Built with High Modulus Fiber (HMF), this impeccable road fork offers superior strength and a superb road feel. Smooth internal fiber flow in the crown/steerer area delivers the best force transfer from crown to shaft and increased impact strength. The orientation of the fibers has been optimized to absorb and dissipate loads, which delivers a confident and comfortable ride. The fork also uses various fiber types based on their specific properties to manage different load types as well as possible in the areas in which they occur—such as side load, torsion, and impact. The WCS Carbon Disc Road Fork features a 46mm rake and includes a compression plug. Welcoming flat-mount disc calipers, this fork also fits up to 30mm tires, depending on tire make and model. - Material: carbon fiber - 1-1/8" straight steerer with integrated 45-degree crown race - Fits 1-1/8 and 44mm headtubes with appropriate headsets - 100x12mm thru-axle (included) - Flat Mount disc brake - Disc brake rotor compatibility: 140 / 160mm - Steerer length: 300mm - Crown diameter: 46mm - Axle-Crown: 371mm - Rake/Offset: 46mm - Spacing: 40mm - Minimum tire clearance: 4mm - Wheel compatibility: 700c - Weight: 390g (with uncut steerer / not including axle)
Ritchey WCS Carbon Gravel Cross Fork
$529.95
Tom Ritchey was riding off-road decades before gravel riding was ever a "thing," and the new WCS Carbon Cross Gravel Fork is the manifestation of the experiences enjoyed on all of those dirty rides mixed with the legendary engineering for which Ritchey is famous. Built from life and ready for your drop bar off-road adventures, this full monocoque carbon fork delivers precision and confidence while offering stability and comfort along some of the more rugged terrain you'll encounter. With logical features—like enough room tires up to 40mm wide, the ability to run 12 or 15mm thru-axles, and ability to run flat-mount disc brakes—the Ritchey WCS Cross Gravel Fork is ideal for long-distance gravel events, your local cyclocross series, spontaneous weekend adventures, and everything in between. - Material: carbon fiber - 1-1/8" straight steerer with integrated 45-degree crown race - Fits 1-1/8 and 44mm headtubes with appropriate headsets - 100x12mm thru-axle (included) - Flat Mount disc brake - Disc brake rotor compatibility: 140 / 160mm - Steerer length: 300mm - Crown diameter: 47mm - Axle-Crown: 383mm - Rake/Offset: 47mm - Spacing: 53mm - Minimum tire clearance: 6mm - Wheel compatibility: 700c - Weight: 430g (with uncut steerer / not including axle)
RockShox Super Deluxe Coil Ultimate DH
$529.00
The Super Deluxe Coil Ultimate DH was designed to meet all the demands of today's ultra-capable downhill bikes, offering a coil spring feel paired with the unique Super Deluxe DH tuned design. Now featuring Maxima Plush fluid for lasting performance and ride quality, it's ready to push your downhill riding limits. - Maxima Plush damping fluid reduces friction and silences damper noise - Low Speed Compression adjustment allows fine-tuning of compression needs from the base tune
RockShox Reba 26
$526.00
Little riders with big dreams. Until now, a premium fork was tough to find for smaller riders. Hello Reba 26, a fork specifically tuned for lighter riders to simplify the ride experience and allow for a lower pressure range. - New graphics are easy to read and make a fresh impact - Specifically tuned for smaller riders - External rebound adjustment
Whisky Parts Co. No. 9 CX Fork Straight Steerer
$525.00
The No.9 CX Flat Mount fork is a light-weight, forward-compatible front-end upgrade, ideal for cyclocross, gravel, or commuting. Featuring the flat mount disc brake standard, easy fender mounts and 12mm thru-axle dropouts to create a refined, clean design that trims considerable weight over previous versions. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for. - 12mm thru-axle, 100mm spacing - Designed for flat mount disc brakes - Hidden, removable fender mounts - 42mm max recommended tire size - ASTM Condition 2 - For off-road riding and jumps less than 12-inches - Includes thru-axle and Whisky Parts Co. compression plug
Whisky Parts Co. No.9 CX Flat Mount Fork
$525.00
The Whisky No.9 CX Flat Mount fork is a lightweight, forward-compatible front-end upgrade, ideal for cyclocross, singletrack, gravel, or commuting. Redesigned, thoroughly tested, and dialed in for rough, off-road riding, it features the flat-mount disc brake standard, easy fender mounts, 12mm thru-axle dropouts, and internal brake routing for a refined, clean design. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for. - 12mm thru-axle, 100mm spacing - Designed for flat-mount disc brakes - Fender eyelets on outside of fork leg for easy mounting - 700c x 42mm or 650B x 50mm max recommended tire size - ASTM Condition 3 – For rough off-road riding and jumps less than 24-inches - Includes thru-axle and Whisky Parts Co. compression plug
Whisky Parts Co. No.9 Carbon Mountain Fork 29-inch
$525.00
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on. - Custom DT RWS Skewer included - 3.0" max recommended tire size - Axle to Crown Length: 480mm - Brake Mount: IS Disc Brake 160mm - Crown Race: 40 - Defined Color: Black - Front Axle: 15 x 100mm - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Weight: 750 grams - Wheel Size: 29-inch
Whisky Parts Co. No.9 MTN Boost ST 29-inch Fork
$525.00
A thoughtful complement to the Whisky No. 9 MTN Boost LT Fork, this short-travel offering is just the piece for transforming hardtail racers into fully rigid cross-country champs. Lightweight carbon construction, a tapered steerer, and thru-axle dropouts promise dependable strength and steering. - Lighter and stiffer than a suspension fork, the MTN Boost ST Fork is long enough to replace forks with 110–120mm of travel - 485mm axle to crown - Boost 110mm spacing with clearance for 29 x 3.0” or 27.5 x 3.0” tires - Room for up to 180mm rotor - Whisky No.9 Thru Bolt and compression plug included
Whisky Parts Co. No.9 RD+ Flat Mount
$525.00
Whisky's No.9 RD+ is an all-road fork designed for versatility with abundant tire clearance, up to 700x38c or 650x47c. Hidden and removable fender mounts make this fork all season capable. - 12mm Thru Axle - Flat Mount Disc Brake - Tapered Steerer Tube - 700x38c/650x47c clearance
Whisky Parts Co. No.9 Road Flat Mount Disc Fork
$525.00
The Whisky No.9 RD thru-axle fork is designed from the ground up to offer a modern road fork experience. Big tire clearance, flat mount brake capability, and internal cable routing all add up to a clean look and capable performance. Featuring sleek hidden fender mounts, this fork carries through with Whisky’s promise of refined, versatile performance. - 1-1/4-inch Tapered steerer tube - 12mm thru-axle, 100mm spacing - Designed for flat mount disc brakes - Hidden, removable fender mounts - 700 x 30c max recommended tire size - Includes thru axle and Whisky Parts Co. compression plug
DVO Topaz T3 Air Shock
$500.00
Conquer It All. The ultimate "do-it-all" air shock. Providing amazing performance and adjustability in a simple and functional design. Air volume is easily tunable via air-volume spacers that can be removed or installed in a matter of minutes. Unmatched small bump compliance and damping is achieved from a bladder and loader-style compression unit. Cooling fins on the reservoir allow heat to effectively dissipate from the shock, keeping temperatures low and damping consistent. The T3 Compression adjust gives you three compression settings for pedaling, traversing, and descending. - T3 Compression Switch - Low-Speed Rebound Adjust - Bladder Pressure Adjust - Adjustable Positive and Negative Volume via Spacers - Durable Water-Transfer Decal - Cooling Fins on Reservoir
Campagnolo Chorus 12-Speed Ergopower Hydraulic Brake/Shift Lever w/Flat Mount Caliper
$499.99
The Campagnolo Chorus Ergopower Brake/Shift system features improved ergonomics that can be tailored to the rider's individual preferences. - Ultra-Shift function allows for multiple shifts in one motion and greater control for racing - Aluminum braking lever features reach adjustment mechanism - Technopolymer Ergopower body Specifications: - Rotor Included: No - Pad Compound: Semi-Metallic - Brake Caliper Mount: Flat Mount - Brake Lever Use: Right - Hydraulic Fluid Type: Mineral Oil - Rear Der/Shifter Compatibility: Campy 12-Speed Chorus/Record/Super Record 2019+ - Drivetrain Speeds: 12 - Adjustable Reach: Yes
Cane Creek DBAir IL Rear Shock
$499.99
DBair IL is a twin-tube inline air shock with superior performance and reliability. The first shock to feature Cane Creek's LinEair Spring, the DBair IL is the best of both worlds, an air shock that feels more supple, linear and seamlessly supportive throughout its travel. - 4-Way independent adjustment—high and low speed compression, high and low speed rebound - Twin-tube damping for unparalleled small bump compliance - Climb switch lessens low-speed compression and rebound damping at the same time for improved climbing traction - Individually dyno-tested
Cane Creek DBcoil IL Rear Shock
$499.99
The DBcoil IL is a twin-tube inline shock that packs in all of the function of a piggyback coil shock in a lighter and sleeker package. Equipped with Climb Switch technology, 4-way adjustability and unparalleled Double Barrel performance, the DBcoil IL dominates aggressive descents with superior small bump compliance, heat dissipation and linear spring action. - 4-Way independent adjustment—high and low speed compression, high and low speed rebound - Twin-tube damping for unparalleled small bump compliance - External spring preload adjustment - Individually dyno-tested - Coil springs sold separately
Ritchey WCS Carbon Cross Disc Fork
$499.95
Ritchey's history with cyclocross runs long and deep, sort of like the mud sections of your favorite 'cross course. The WCS Carbon Cross Disc Fork is designed from the ground up to manage the unique stresses a disc brake demands – including a carbon layup that resists twisting under hard braking. Decades of experience between the course tape, and building the bikes and components designed to win, inform the performance and design details of this fork. It employs a monocoque construction, it's compatible with standard and integrated headsets, and features carbon dropouts and disc mount. - Blade: Carbon - Crown: Carbon - Steerer: Carbon - Steerer Length: 300mm - Steerer Diameter: Tapered 1-1/8 – 1.5-inch - Rake: 45mm - Blade Shape: Curved - Drop out: Carbon - Rotor size: 140mm (160 w/ adapter) - Crown Diameter: 45mm - Integrated 45-degree crown race - Axle-to-Crown: 395mm - Finish: Matte UD carbon - Weight: 440g (w/ uncut steerer) - Compression plug included
RockShox Vivid R2C Rear Shock
$494.00
From downhill racing to extreme freeride, the RockShox Vivid R2C combines extreme durability with the precise adjustments that matter when you're going big. Laser-etched controls let you dial in beginning and ending-stroke rebound as well as low-speed compression. Rapid Recovery allows the shock to recovery faster between consecutive bumps, letting the wheel track the ground with greater precision. - Intended Use: Downhill - Counter Measure for zero force stroke initiation - Dual Flow Adjust absorbs big hits while staying active through small hits - Switch for on the fly toggle between full and open compression - Eye to eye length: 240mm / 9.5 inches - Stroke: 76mm / 3 inches - Eyelet Diameter: 12.7mm - Positive Spring: Coil - External Adjustments: Rebound Damping , High Speed Compression Damping , Low Speed Compression Damping * Spring sold separately
RockShox Vivid R2C Shock
$494.00
The legendary Vivid is like a “Trail Whisperer.” Even in the most impossible situations, RockShox's most rugged coil shock always knows just the right way to get it done. Any trail, any time. Nothing shakes the Vivid’s confidence. From downhill racing to extreme freeride, the Vivid combines extreme durability with the precise adjustments that matter when you’re going big. Laser-etched controls let you dial in beginning and ending-stroke rebound as well as low-speed compression, making this shock fly through rock gardens as smoothly as it absorbs a sudden drop in altitude. - WEIGHT: 468g - DAMPING: External beginning stroke rebound, ending stroke rebound, low speed compression - CONFIGURATIONS: 200x57mm, 216x63mm, 222x70mm, 240x76mm, 267x89mm - SPRING: Steel coil - SPRING ADJUST: Preload - SHAFT MATERIAL: 7075 aluminum - BODY MATERIAL: Forged aluminum - BODY FINISH: Hard anodized - OTHER: *Weight based on 222x70, no coil, no hardware
Campagnolo Record EPS TT Shift/Brake Levers
$485.00
When you're racing against the clock, there's no room for mistakes, so Campagnolo's Record EPS TT Shift/Brake Levers ensure a perfect shift every time. In addition, flawless braking is always at hand thanks to the contoured, ergonomic carbon levers. And with easy-to-access buttons and the power of electronic shifting, you can switch gears even while braking.
TruVativ Descendant Troy Lee Designs CoLab Crankset
$484.00
Performance Creativity For the aficionados and the geeks and the fanboys and the freaks, a custom-painted crank is a place of pride. A painted hammer. A beautiful ax. Troy Lee and his team channeled the future of camo to design these cranks, and the future in the stiff, durable world of SRAM cranks is looking exceptionally bright. Specifications: - Speeds: 11/12 - BB Compatibility: DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP - Chainring Size: 32 - Crank Arm Length: 165mm, 170mm, 175mm - Chainline: 52.0mm - BB Spindle Interface: DUB - Chainring Material: Aluminum - Guard: No Guard - Bolt Circle Diameter (BCD: Direct Mount (DM) - Crank Arm Material: Carbon
RockShox 35 Gold RL
$483.00
With bigger bikes there comes bigger demands. Thankfully, we created the 35 Gold to meet all of them, both in performance and value. Whether you have an E-MTB or MTB, the burly 35 Gold checks the box with our proven DebonAir spring and Motion Control damping. And new this year is an E-MTB-focused option with mounting points for optional full or short fenders. All told, you might wonder how we packed so much quality and performance into such a wallet-friendly package. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (1.8" taper available) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Highly tunable DebonAir spring offers a consistent feel throughout the travel - Fits Tires up to 2.8" (without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 35mm aluminum upper tubes couple stiffness and lightweight with a premium look - Offset: 44mm
RockShox Judy Gold RL w/Remote
$473.00 - $483.00
Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring
SRAM RED eTap AXS Shift-Brake Lever
$463.00
Award-winning eTap shift logic, now with the connectivity of AXS. The SRAM RED eTap shift-brake levers build on this foundation while integrating our newest technologies. And, it offers many personalizations, from shifting sequence to brake lever reach. - AXS enabled for easy personalization - Simple and intuitive eTap shift logic - Customizable fit with Reach Adjust - Two ports for Blips on each lever - Large SRAM eTap paddles provide positive controls for rider input - For use with mechanical rim brakes
SRAM XG-899 E-Block Cassette
$462.00
SRAM's E-BLOCK shifting technology is a fundamental redevelopment of external drivetrain shifting. On the E-BLOCK cassette, the chain has a defined link position on each cog. Cog architecture has been engineered to work with both inner and outer links of the chain, which allows extremely refined shifting for both inboard and outboard shifts. The result is precise and robust shifting performance in any situation, even with full motor support. - 11 – 48T, 8-speed cassette machined from case-hardened tool steel - Ideal mid-ship motor gear range - Increased chain wrap on climbing cogs - Symmetric shifting geometry allows fast, precise gear shifts - Optimal inboard and outboard shifting performance - The big steps between cassette cogs is a completely new cassette technology engineered specifically for the demands of E-MTB - Non XD driver body compatible - Gear Ratio: 11 – 48T - Recommended Group: EX1 - Cogs: 11, 13, 15, 18, 24, 32, 40, 48
ENVE Road Fork Rim Brake
$450.00
ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness. When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.
RockShox SIDLuxe Ultimate Rear Shock
$450.00
Riding SIDLuxe Ultimate means every detail is considered—performance packed with chiseled good looks and premium foil graphics. - New XC-focused lightweight design delivering premium performance and efficiency - Dial in the perfect match with multiple lockout tunes available - Comfortable damping in open mode with low High Speed Compression - A match made in heaven, designed to complement the feel of SID/SID SL - Remote option compatible with TwistLoc and OneLoc - Maxima Plush damping fluid reduces friction and silences damper noise - Ultimate foil graphics package; includes blue decal
Easton EC90 SL Crankarms
$449.99
The EC90 SL crank utilizes the Race Face CINCH technology, which allows for direct mount 1x rings as well as direct mount 2x spiders, and industry-leading versatility. Increasingly popular 1x setups have many advantages including weight and simplicity. Their major limitation is adaptability. A Cyclocross rider's ability to ride a course, then effortlessly change chainrings to their preferred setup is a major necessity that has, until now, been overlooked. Easton refines the design for larger ring applications with improved chain retention while reducing running noise and friction. Arms come assembled with spindle. Rings and BB sold separately. - EC90 SL carbon arms feature hollow carbon construction, while the spindle and pedal inserts features high-grade aluminum - CINCH direct mount technology is compatible with both 1x and 2x setups - CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS BB tool for removal and installation - Chainline: 1x 47mm / 2x 45mm - Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay, 135/142 Road Disc Hubs < 415 mm Chainstay - 30mm spindle - BB Options: BB86, BSA 68mm, PF30 68mm, BB30 68mm, BBright, 386Evo - Bottom bracket and chainrings sold separately
Race Face Next SL G5 CINCH Crankset
$449.99
Built off the proven Next R crank arm shape and spindle insert, the Next SL stands to be lighter, with major improvements in durability and carbon consistency. Made in Canada with American-sourced carbon, the Next SL is also stiffer, improving power transfer and giving you the competitive edge on your pedal-oriented cross country rig. - Increased stiffness and strength improves power transfer - Removable spider offers the ability to convert between existing chainring standards while remaining flexible to future developments - Includes 30mm CINCH spindle, and is power meter compatible - Direct mount chainline: 52mm / 58.5mm (Flipped Ring) - 2X Cinch spider chainline: 50.5mm - Boost 2X Cinch spider chainline: 53.5mm - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 135/142 MTB Hubs, 141/148 Boost Hubs, 150/157 DH Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace/Easton CINCH - Chainring BCD: Direct Mount CINCH - Weight: 418 - BB Included: No
Ritchey WCS Carbon QR Cross Fork
$449.95
Ritchey's history with cyclocross runs long and deep, sort of like the mud sections of your favorite 'cross course. The WCS Carbon Cross Disc Fork is designed from the ground up to manage the unique stresses a disc brake demands, including a carbon layup that resists twisting under hard braking. Decades of experience between the course tape and building the bikes and components designed to win inform the performance and design details of this fork. It employs a monocoque construction, it's compatible with standard and integrated headsets, and it features carbon dropouts and post disc mount. - Material: carbon fiber - 1-1/8" straight steerer with integrated 45-degree crown race - Fits 1-1/8 and 44mm headtubes with appropriate headsets - Quick release (not included) - Post Mount disc brake - Disc brake rotor compatibility: 140 / 160mm - Steerer length: 300mm - Crown diameter: 45mm (1-1/8") - Fork length: 395mm - Rake/Offset: 45mm - Spacing: 54mm - Minimum tire clearance: 6mm - Wheel compatibility: 700c - Weight: 410g (with uncut steerer / not including axle)
RockShox Deluxe Nude Rear Shock
$440.00
Deluxe Nude was developed with the Scott development team to provide riders the ultimate RockShox remote rear shock that features Descend, Traction, and Lock modes. Light and efficient in true Deluxe style. - Descend—Open things up and enjoy the ride down - Traction—Factory tuned compression provides a stable pedaling platform and maintains grip at the tire - Lock—True Lockout, for all those sprint finishes
RockShox Monarch XX1 Shock
$440.00
Few things would piss off Newton more than the Monarch XX. Simply put, no other shock packs more energy-efficient performance in a lighter weight package – one that seemingly defies Newton’s so-called "laws" of physics. But the Monarch XX does exactly that, providing the ability to lock-out rear suspension via a single bar-mounted XLoc Sprint button. The 100% hydraulic remote lever and system is completely sealed, so unlike cable-actuated units – Monarch XX is impervious to contamination. If Newton were alive today, we doubt he'd be that stoked to go back to the drawing board with his theories. But a few miles on the Monarch XX sure would help inspire a new way of thinking, and riding. - WEIGHT: 205g - DAMPING: External rebound and XLoc Full Sprint hydraulic remote lockout with floodgate - CONFIGURATIONS: 152x31mm, 165x38mm, 184x44mm, 190x51mm, 200x51mm, 200x57mm, 216x63mm - REBOUND DAMPING: Rapid Recovery - SPRING: Standard, High Volume, Standard with High Volume Eyelet, High Volume with High Volume Eyelet - SPRING ADJUST: Air pressure via single Schrader valve - SHAFT MATERIAL: 7075 aluminum - SHAFT DIAMETER: 9mm - BODY MATERIAL: Hard anodized, forged aluminum with sag gradients - BODY FINISH: Fast Black - OTHER: Weight based on 165x38mm, standard air can, no hardware
Whisky Parts Co. No.7 Carbon Disc Cyclocross Fork
$435.00
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.7 Carbon Disc Cyclocross Fork. It makes sure you don't have to worry about uncomfortable chatter or vibration while experiencing an astoundingly plush ride. They've accomplished this by using proven technologies like a delightfully stiff and compliant UD carbon fiber construction, not to mention the use of disc brake mounts on their CX forks. It all results in an enhanced riding experience and adds up to performance that you can count on. - Axle to Crown Length: 392.2mm - Brake Mount (Fork): Post Mount 140mm - Front Axle: 10mm x 100mm - Material: Carbon - Maximum Tire Clearance (Fork): 48 - Offset: 47mm - Rotor Size (Fork): 160mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length (mm): 300mm - Wheel Size: 700c
Shimano XTR Hollowtech II M9120-1 Crank Arms
$434.99
Shimano XTR M9100 cranks feature a lightweight and rigid design thanks to Hollowtech II crank construction. Chainrings can be easily exchanged with the direct mount system and one key release. - Single front chainring set up (chainring not included) - Gear tooth profile designed for MTB riding usage - Crank can be exchanged between single and double front chainring set ups - 168mm Q-Factor
Race Face Next R Boost Crank Arm Set
$429.99
- Manufactured from UD Carbon with matte clearcoat - Handmade in Canada - SixC G2 Pedal Insert for increased Rally Factor - Burlier 7050 Spindle - Cinch technology for game-changing compatibility
Race Face Next R CINCH Crank Arm Set
$429.99
Pedal-heavy outings with rowdy all-mountain shredding can be very demanding on cranks. The Next R CINCH Crankset is light and strong where it matters most. Racing time or just rallying with friends, feel free to get a bit more sideways with Next R. - Manufactured from UD Carbon with matte clearcoat - Cinch technology for game-changing compatibility - Includes 30mm spindle, for 68/73mm BB shells
RockShox Monarch RT3 Rear Shock
$429.00
The Monarch's lightweight design not only delivers silky smooth travel, but thanks to a redesigned DebonAir spring with updated damping controls, it also delivers a spring rate you’d generally only get from a much heavier coil shock. Monarch floats through bumps even better than before, turning rugged trails into tire-gripping velvet. The chassis is lean while maintaining the durability and adjustability needed to bite off huge chunks of burly trail action and epic cross country. The Monarch RT3 features external rebound and 3-Position compression adjustment (Open/Pedal/Lock). - Intended Use: XC, Trail - Rapid Recovery allows the shock to recovery faster between consecutive bumps, letting the wheel track the ground with greater precision - DebonAir spring requires less force to initiate travel, offering plusher, more sensitive suspension while holding on to big-hit progressiveness - Fast Black hard anodized, forged aluminum body with sag gradients - 10mm 7075 aluminum shaft
RockShox Monarch RT3 Rear Shock w/Autosag
$429.00
The Monarch's lightweight design not only delivers silky smooth travel, but thanks to a redesigned Solo Air spring with updated damping controls, it also delivers a spring rate you’d generally only get from a much heavier coil shock. Monarch floats through bumps even better than before, turning rugged trails into tire-gripping velvet. The chassis is lean while maintaining the durability and adjustability needed to bite off huge chunks of burly trail action and epic cross country. The Monarch RT3 features external rebound and 3-Position compression adjustment (Open/Pedal/Lock). - Intended Use: XC, Trail - Rapid Recovery allows the shock to recovery faster between consecutive bumps, letting the wheel track the ground with greater precision - SoloAir spring lets you add air to your forks through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously - Fast Black hard anodized, forged aluminum body with sag gradients - 10mm 7075 aluminum shaft - Autosag is a simple set-up feature available only on Specialized bicycles. This feature utilizes the rider's weight to set proper shock pressure
RockShox Monarch RT3 Shock
$397.00 - $429.00
Featuring silky smooth travel in a new lightweight design, Monarch floats through bumps even better than before, turning rugged trails into tire-gripping velvet. The chassis is lean while maintaining the durability and adjustability needed to bite off huge chunks of burly trail action and epic cross country. - WEIGHT: 215g - DAMPING: External rebound, 3 position compression (Open/Pedal/Lock) - CONFIGURATIONS: 152x31mm, 165x38mm, 184x44mm, 190x51mm, 200x51mm, 200x57mm, 216x63mm - REBOUND DAMPING: Rapid Recovery - SPRING: Standard, High Volume, Standard with High Volume Eyelet, High Volume with High Volume Eyelet, DebonAir - SPRING ADJUST: Air pressure via single schrader valve - SHAFT MATERIAL: 7075 aluminum - SHAFT DIAMETER: 10mm - BODY MATERIAL: Hard anodized, forged aluminum with sag gradients - BODY FINISH: Fast Black - UPGRADE: over RL: 3 position floodgate lever - OPTIONS: Also available in 197x48mm and 197x51mm with AutoSag and Specialized mount, 184x48mm and 197x57mm DebonAir with Trek mount - OTHER: Weight based on 165x38mm, standard air can, no hardware
No Image
$425.00
The Whisky No.7 RD thru-axle fork is a thoroughly modern road fork for road bikes with tapered steerer tubes. It features a 12mm thru-axle for precise handling, clearance for high-volume road tires, and clean internal cable routing. Flat mount brake capability offers clean caliper fitment and backwards compatality with post mount brakes using adaptors. - 100 x 12mm thru-axle - 1-1/8 – 1.5" tapered steerer - 45mm offset
FSA SL-K Modular BB386EVO Crankset
$420.00
SL-K modular BB386EVO is the latest FSA crankset for gravel, adventure, or road use. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards. - Hollow carbon fiber arms with UD finish - Forged AL7050 BB386EVO spindle - Direct mount outer chainring and 90 BCD inner chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems
SRAM RED AXS DUB Crank Arm Assembly
$410.00
The SRAM RED AXS Crank Arm Assembly features hollow carbon Exogram crank arms for a lightweight, strong, and elegant crank. It can be paired with any SRAM AXS spider or integrated chainring, with or without power. - The 8-bolt interface is compatible with power and non-power AXS spiders and integrated chainrings - Not compatible with SRAM's 3-bolt direct mount interface - Hollow Exogram carbon arms - Spider and chainrings sold separately - DUB spindle interface - Compatible with all SRAM Road DUB bottom brackets - Number of Chainrings: No Rings, No Spider Included - Crank Intended Use: Road, Tri, Cyclocross - Pedal Spindle: 9/16" - Spindle Interface Type: SRAM DUB - Chainring BCD: Direct Mount SRAM - BB Included: No
Shimano GRX BR-RX810/ST-RX810 Disc Brake with Dual Control Lever
$409.99
With a low-profile Flat Mount design, the Shimano GRX BR-RX810 hydraulic disc brakes provide greater control for mixed-terrain riding. The Shimano GRX Dual Control Lever delivers light and responsive shifting for mixed-terrain riding. The ergonomic shifter design improves comfort, and the textured, anti-slip brake lever increases control on bumpy terrain. - Excellent heat dissipation - Flat mount and anti-mud specification - Convenient tool access - Simple wheel replacement - Easy and clean bleeding system - Never hesitate to tackle rough surfaces - Simple set up and maintenance - Gravel inspired lever and bracket ergonomics - Anti-slip brake lever - Greater mixed-terrain control - Same light shifting operation as top tier road systems
RockShox Judy Gold RL
$376.00 - $408.00
Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring
RockShox Deluxe Ultimate Rear Shock
$407.00
A perfect match for the current crop of ultra-lightweight and capable dream bikes, Deluxe Ultimate offers a fully checked damper design allowing for a Low Speed Compression adjustment and optimal traction control tuning. It also features Maxima Plush fluid for added performance and ride quality so you can go on and shred to your heart’s content. - Fully checked damper design allows for a Low Speed Compression adjustment and optimal traction control tuning - Maxima Plush damping fluid reduces friction and silences damper noise - Highly tunable DebonAir spring offers a smooth, consistent feel throughout the travel - Separate and independent open and threshold pistons tuned exactly for your ride
Campagnolo Chorus 12-Speed Crankset
$406.45
The Campagnolo Chorus 12-Speed Crankset features lightweight carbon crank arms, and is optimized for Campagnolo's Ultra-Torque crank system. - Utilizes Campagnolo's Ultra-Torque crank system to provide a very lightweight and stiff system that transfers power to the pedals without power loss - Directly molded unidirectional carbon fiber cranks, steel axle, and aluminum chainrings provide exceptional stiffness and optimum power transmission - Symmetrical teeth on the internal chainring allow for fluid and precise transmission, even with extreme cross-chaining - Chainrings are surface-treated for longer life - Q-Factor: 145.5mm - Design is optimized to run multiple chainring combinations - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 96 - Pedal Spindle: 9/16" - Crank Intended Use: Road - Drivetrain Speeds: 12 - BB Included: No - Weight: 686
SRAM NX Eagle Groupset
$404.00
Whether you're discovering the mountain for the first time or you're an MTB lifer searching for a no-nonsense, no-worries 1x drivetrain, SRAM NX Eagle is ready for action and ready to take you there. NX Eagle brings you a wide range of gear choices engineered for simplicity and durability, so you can focus on what matters most: the ride ahead. German engineered and proudly bearing the SRAM Eagle stamp of approval, NX Eagle is ready to let the world know what real riding feels like. Includes - Crankset: DUB 12-speed BOOST with DM 32T X-SYNC Chainring - Rear Derailleur - Trigger Shifter with Clamp - Chain: 12-speed, 126 links - Cassette: PG-1230 11-50T - Chaingap Gauge
FSA KFX Modular Crankset
$399.00
The KFX Super Light crankset is the pinnacle of FSA's manufacturing capabilities. Ultra light and stiff, this crankset will standup to the toughest riding conditions. Feeling equally at home on an enduro trail as it does on a flowing CX ride, this is the crankset that'll shed weight while instilling confidence. - Modular - Thanks to this interchangeable system, any rider or mechanic can easily, quickly, and safely swap out the spider, spindles, and chainrings from one set to another - Lightweight - The KFX range brings a selection of lightweight and stiff components to mountain bikes - Revolutionary Manufacturing Process - Each KFX crank arm starts out as two separate forged blanks that are precision CNC-machined into two pieces. The hollowed-out halves feature a series of three main ridges & grooves down the outside of each arm that form a tightly interlocking single piece - Number of Chainrings: Single - Chainline/Hub Compatibility: 135/142 MTB Hubs, 141/148 Boost Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Rings: 32 - Spindle Interface Type: 392 EVO - Drivetrain Speeds: 10, 11 - Chainring BCD: Direct Mount FSA - BB Included: No
e*thirteen by The Hive TRS Race Crankset
$399.00
e*thirteen's TRS Race carbon crankset is crafted from lightweight components, so you can hit the trails at full speed. - Features compression molded carbon fiber crankarms and a 73mm aluminum P3 Connect spindle for superior durability and weight savings - Spindle is located on the non-drive side of the crank for easier chainguide setup and drivetrain maintenance - Crank and spindle features Quick Connect lockring and Adaptive Preload Adjuster for easy chainring installation - The adjustable chainline accommodates non-Boost (142mm), Boost (148mm), and Super Boost (157mm) - Compatible with e*thirteen's SL Guiderings (28-38t options for non-Boost and Boost frames) and UL Guiderings (30-42t options for Super Boost frames) - Compatible with the following bottom bracket standards: 68/73mm threaded BSA, PF30, BB30, BB92 - Number of Chainrings: No Rings Included - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: e*Thirteen P3 Connect - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount e*Thirteen - BB Included: No
SRAM X01 DH X-SYNC Crankset
$377.00
The X01 DH crankset with X-SYNC technology is engineered for ultimate DH performance in the most aggressive terrain. The carbon crank combines stiffness and strength with lightest-in-class weight of under 800 grams. Proven in World Cup and World Championship racing, it's the crankset made for relentless downhill rides. - Carbon DH racing crank - CNC-machined, 7075, two-tone anodized X-SYNC chainring, 94 BCD - X-SYNC technology compatible with SRAM 1x7 and 1x10-speed DH drivetrains - X-SYNC tall, square tooth design provides maximum chain control - Sharp, narrow tooth profile and rounded chamfer edges help manage a deflected chain - Mud-clearing recesses for the inner chain links and rollers - Lightest in class carbon construction - High strength alloy pedal lug
RockShox Recon Silver RL
$268.00 - $376.00
With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, and new E-MTB configured fork options with fender mounting points, Recon Silver is an all-around performer suited for any MTB or E-MTB bike. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (15x110mm version) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Fit Tires up to 2.8" (15x110mm version without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 32mm steel upper tubes couple stiffness with a premium look
SRAM Force 22 Hydraulic Disc Brake & Brake Lever (Left)
$371.00
SRAM's Force 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and represents SRAM's attempt at perfecting braking performance. A carbon brake lever with an aluminum shift lever delivers precise modulation and shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The forged aluminum disc caliper itself is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races or epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Force 22 Hydraulics, you'll never go back to rim brakes again!