Skip to main content


*** JOE BIKE WILL BE OPEN ON MEMORIAL DAY FROM 10AM TO 4PM ***

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

Cane Creek 40-Series Headset
$85.00
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability, and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Compatible with straight steerer 1-1/8" forks - Bearing Type: Cartridge - Color: Black - Defined Color: Black - Weight: 171 g -Upper Stack Height: 8 mm - Lower Stack Height: 12 mm - Crown Race: 30 - S.H.I.S Lower: EC44 - S.H.I.S Upper: ZS44 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
Cane Creek Hellbender 70 Headset
$90.00 - $110.00
Cane Creek headsets with Hellbender stainless steel bearings with increased sealing elements and more grease in relation to the comparable 110 bearing. - Designed to bridge the gap between the 40-series and 110-series headsets
Cane Creek 110 Series Short Cover
$120.00
Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Aluminum dual seal crown race protects lower bearing - Interlok spacer compatible - 110 year warranty - Uses 36/45 degree crown race and compression ring - Compatible with straight steerer 1-1/8" forks
Cane Creek 110 Short Cover Headset
$130.00
Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Aluminum dual seal crown race protects lower bearing - Interlok spacer compatible - 110 year warranty
Cane Creek 110 Headset
$160.00
Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Aluminum dual seal crown race protects lower bearing - Interlok spacer compatible - 110 year warranty
Cane Creek 110 Series Headset
$160.00
Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Aluminum dual seal crown race protects lower bearing - Interlok spacer compatible - 110 year warrranty
Cane Creek AngleSet Tapered Steerer ZS44/28.6/H13 | EC56/40 | 30/H15
$189.00
The award-winning AngleSet threadless headset makes it possible to change your game. You can transform the head angle of your mountain bike with ease, with up to six offset angle adjustments. Steeper or slacker adjustments from 0.5 to 1.5 degrees, make dialing in the perfect geometry to attack the trail a breeze. The design of AngleSet is head-tube length independent and fits most popular head-tube standards for both tapered and straight forks.
Cane Creek DBAir IL Rear Shock
$499.99
DBair IL is a twin-tube inline air shock with superior performance and reliability. The first shock to feature Cane Creek's LinEair Spring, the DBair IL is the best of both worlds, an air shock that feels more supple, linear and seamlessly supportive throughout its travel. - 4-Way independent adjustment—high and low speed compression, high and low speed rebound - Twin-tube damping for unparalleled small bump compliance - Climb switch lessens low-speed compression and rebound damping at the same time for improved climbing traction - Individually dyno-tested
Cane Creek DBcoil IL Rear Shock
$499.99
The DBcoil IL is a twin-tube inline shock that packs in all of the function of a piggyback coil shock in a lighter and sleeker package. Equipped with Climb Switch technology, 4-way adjustability and unparalleled Double Barrel performance, the DBcoil IL dominates aggressive descents with superior small bump compliance, heat dissipation and linear spring action. - 4-Way independent adjustment—high and low speed compression, high and low speed rebound - Twin-tube damping for unparalleled small bump compliance - External spring preload adjustment - Individually dyno-tested - Coil springs sold separately
Cane Creek DBAir CS Rear Shock
$699.00
The DBair CS features high- and low-speed compression and rebound adjustment, allowing the rider to fine tune suspension response on the trail to match terrain, riding style, and personal preference. The addition of a climb switch allows the rider to adjust both low speed compression and rebound simultaneously for improved climbing efficiency. Air volume can be adjusted with higher volume XV cans or spacers to further tune the ride. - 4-Way independent adjustment—high and low speed compression, high and low speed rebound - Twin-tube damping for unparalleled small bump compliance - Climb switch lessens low-speed compression and rebound damping at the same time for improved climbing traction - Auto-adjusting negative spring - Individually dyno-tested - Hand Built in Fletcher, NC
Cane Creek DBAir CS Rear Shock, Trunnion
$699.00
The DBair CS features high- and low-speed compression and rebound adjustment, allowing the rider to fine tune suspension response on the trail to match terrain, riding style, and personal preference. The addition of a climb switch allows the rider to adjust both low speed compression and rebound simultaneously for improved climbing efficiency. Air volume can be adjusted with higher volume XV cans or spacers to further tune the ride. - 4-Way independent adjustment—high and low speed compression, high and low speed rebound - Twin-tube damping for unparalleled small bump compliance - Climb switch lessens low-speed compression and rebound damping at the same time for improved climbing traction - Auto-adjusting negative spring - Individually dyno-tested - Hand Built in Fletcher, NC
Cane Creek DB Kitsuma Coil Rear Shock
$699.99
The DB Kitsuma shock was designed to be very intuitive and easy to use for the rider, on and off the trail. It boasts a wider range of damping adjustment on the compression circuit and increased range of rebound control over any other major shock on the market today. - Three Position Climb Switch provides three distinct modes, drastically affecting the shock's feel and character. The new three position climb switch retains the "Descend" and patented "CS" mode, while adding a new "Firm" mode - Tool-Free adjustments are ergonomically designed to be easily accessible and adjustable trail-side—giving riders the power of a pro-tune at their fingertips - The rebound range has been shifted downward for more rebound damping to accommodate the larger spring rates needed for more modern bikes
Cane Creek DB Kitsuma Coil Trunnion Rear Shock
$699.99
The DB Kitsuma shock was designed to be very intuitive and easy to use for the rider, on and off the trail. It boasts a wider range of damping adjustment on the compression circuit and increased range of rebound control over any other major shock on the market today. - Three Position Climb Switch provides three distinct modes, drastically affecting the shock's feel and character. The new three position climb switch retains the "Descend" and patented "CS" mode, while adding a new "Firm" mode - Tool-Free adjustments are ergonomically designed to be easily accessible and adjustable trail-side—giving riders the power of a pro-tune at their fingertips - The rebound range has been shifted downward for more rebound damping to accommodate the larger spring rates needed for more modern bikes - Trunnion Mount
Cane Creek DB Kitsuma Air Rear Shock
$729.99
The DB Kitsuma shock was designed to be very intuitive and easy to use for the rider, on and off the trail. It boasts a wider range of damping adjustment on the compression circuit and increased range of rebound control over any other major shock on the market today. - Three Position Climb Switch provides three distinct modes, drastically affecting the shock's feel and character. The new three position climb switch retains the "Descend" and patented "CS" mode, while adding a new "Firm" mode - Tool-Free adjustments are ergonomically designed to be easily accessible and adjustable trail-side—giving riders the power of a pro-tune at their fingertips - The rebound range has been shifted downward for more rebound damping to accommodate the larger spring rates needed for more modern bikes
Cane Creek DB Kitsuma Air Trunnion Rear Shock
$729.99
The DB Kitsuma shock was designed to be very intuitive and easy to use for the rider, on and off the trail. It boasts a wider range of damping adjustment on the compression circuit and increased range of rebound control over any other major shock on the market today. - Three Position Climb Switch provides three distinct modes, drastically affecting the shock's feel and character. The new three position climb switch retains the "Descend" and patented "CS" mode, while adding a new "Firm" mode - Tool-Free adjustments are ergonomically designed to be easily accessible and adjustable trail-side—giving riders the power of a pro-tune at their fingertips - The rebound range has been shifted downward for more rebound damping to accommodate the larger spring rates needed for more modern bikes - Trunnion Mount
Cane Creek Cane Creek Helm MKII Air Suspension Fork
$1,049.99
The Cane Creek Helm MKII Air Suspension Fork features an upgraded damper design for increased support and control and a redesigned air spring that allows for increased air volume for better traction and suppleness. - D-Loc 15mm bolt-on thru-axle
Cane Creek Cane Creek Helm MKII Coil Suspension Fork
$1,049.99
The Cane Creek Helm MKII Coil Suspension Fork features an upgraded damper design for increased support and control. - Compression and midvalve circuit offer increased support and control - SKF oil seal head cartridge and wiper seals are low friction - Damping features include: high speed compression, low speed compression, low speed rebound - Adjustment options include: high speed compression (10 positions), low speed compression (17 positions), low speed rebound (10 positions), indexed travel adjust system, spring pre-load adjust - Lightweight coil spring - 55 lb Lightweight Coil Spring included from factory
Cane Creek eeWings Mountain Titanium Crankset
$1,099.99
Take flight with the eeWings from Cane Creek. These titanium cranks are designed to keep up with the rigorous demands of the most aggressive trail and enduro mountain bikers—though they will benefit any rider who puts a premium on durability, stiffness and weight. - eeWings Mountain 165mm, 170mm or 175mm - 30mm Spindle - 10 year Warranty
Chris King Base Plates
$29.00
These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes - Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only - Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes - King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes - 30.0mm ID/40.5mm OD for post-April 1995 1-1/8" Headsets - 30.0mm ID/44.0mm OD for pre- April 1995 1-1/8" Headsets
Chris King NoThreadSet Headset Sotto Voce (1-inch)
$150.00
Chris King led the threadless headset revolution with their NoThreadSet. This iconic, incredibly durable piece of equipment embodies the limitless potential found in simple, high-quality design. Equally appropriate on your road or mountain bike, the NoThreadSet has been ridden to World Cup titles on the trail and to victory at the Tour de France. Featuring precision-machined aluminum cups, King's own in-house stainless steel bearings, a stainless steel base plate, and all ten Chris King colors, each headset is a statement piece that will likely outlast your bike! This model fits bikes with a non-tapered 1-inch headtube and threadless steerer tube. The Sotto Voce models feature toned down graphics that let you sport your Chris King style in a more subtle manner.
Chris King InSet 8
$170.00
The Inset headset offers Chris King's trademark quality and durability in a low-stack configuration sized for contemporary headtube dimensions. King's legendary, made-in-house bearings still form the centerpiece of the Inset headsets, with precisely machined aluminum cups and headset caps available in all ten classic Chris King colors. The Inset 8 is compatible with tapered 1-1/8 - 1-1/4-inch forks and frames using a 44mm headtube.
Cinq5 ShiftR Thumb Shifter for Rohloff
$299.00
For use with 31.8 mm drop bars. Two paddle shifters cover the 14 Rohloff gears.
Cloud-9 Metroline Airflow
$36.00
- Comfort saddle with multi-stage foam and a full memory foam top layer and elastomer suspension for increased comfort - Water resistant material for increased all weather durability - Front and rear underside bumpers for increased wear resistance - Vented anatomical cutout - Dimensions: 255 x 220mm
Crank Brothers Stamp 1 Large
$15.99 - $50.00
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: 10-15 (us) // 43-49 (eu) - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
Crank Brothers Stamp 1 Small
$50.00
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
Crank Brothers Candy 1
$60.00
Crankbrothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud shedding capability, and customizable float and release angles create a dialed-in feel. Spindle material: Forged scm 435 chromoly steel Body material: One piece composite Wing material: Stamped steel Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 294g per pair Warranty: 5 years
Crank Brothers Double Shot 1
$60.00 - $65.00
Choose to ride flat or clipped in for city commutes and casual rides around town. This hybrid composite pedal with its 2-sided entry allows you to do both. It features premium bearings and a double seal system, diamond plate pads for traction, and molded pins and ribs for grip. - Premium brass cleats with shims included - Q-factor: 57mm - Release angle: 15° / 20° - Forged 435 Chromoly steel spindle - 300 series stainless steel spring - 5-year warranty - 331g per pair
Crank Brothers Stamp 2
$80.00 - $90.00
Size-specific enthusiast-level platform pedal provides optimal shoe/pedal interface. Details - Optimal surface area - Minimal profile 16mm thin - 10 adjustable 8mm pins per side for grip - 10mm pins available for purchase here - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (US) // 37-43 (EU) - Stamp large recommended for shoe sizes: 10-15 (US) // 43-49 (EU) - Serviceable, pedal refresh kit available Specs - Adjustable pins: 10 per side - Body Material: A380 Aluminum - Endcap: T15 - Footprint: 100mm x 100mm (Small), 114mm x 111mm (Large) - Inner Bearing Type: Igus Bearing - Max Rider Weight: No restriction - Outer Bearing Type: Double Cartridge Bearing - Shoe Size: US 5-10 // EU 37-43 (Small), US 10-15 // EU 43-49 (Large) - Spindle Material: Forged SCM 415 Chromoly Steel - Warranty: 5 years - Weight: 439g per pair (Small), 494g per pair (Large)
Crank Brothers Mallet 2 Pedals
$99.00
The Mallet 2 pedal from Crank Brothers is ready to drop the hammer. No, seriously, this thing has been redesigned and rebuilt from the ground up, and it's a whole new creature. Durability and a lightweight aluminum body take the center stage in this versatile pedal that's equally at home shredding singletrack and providing a platform for your sneakers while you ride to class. The Mallet 2 offers a flat pedal feel and clipped-in control simultaneously for the best of both worlds and performance you can feel. And, with a customizable float and release angle, your body will thank you with miles and miles of fun.
DVO Topaz T3 Air Shock
$500.00
Conquer It All. The ultimate "do-it-all" air shock. Providing amazing performance and adjustability in a simple and functional design. Air volume is easily tunable via air-volume spacers that can be removed or installed in a matter of minutes. Unmatched small bump compliance and damping is achieved from a bladder and loader-style compression unit. Cooling fins on the reservoir allow heat to effectively dissipate from the shock, keeping temperatures low and damping consistent. The T3 Compression adjust gives you three compression settings for pedaling, traversing, and descending. - T3 Compression Switch - Low-Speed Rebound Adjust - Bladder Pressure Adjust - Adjustable Positive and Negative Volume via Spacers - Durable Water-Transfer Decal - Cooling Fins on Reservoir