Fall Holiday Sale

Blackthorn C XTR comes equipped for challenging all-mountain terrain. The carbon fiber frame lends the stiffness you need to hold your line. The 140 mm Fox Float X Factory shock and 160 mm Fox Float 36 Factory GRIP2 fork ensure that you can handle just about any feature that's waiting around the next berm. Progressive geometry and our Split Pivot suspension design keep things composed on wicked descents and put you in a position to overcome tough climbs. Our pack-free riding features include a padded tube strap spot, top tube mount, and bottle mount for a lighter load on your back. Shimano's gold-standard XTR 1 x 12 groupset and four-piston brakes make speed modulation as smooth as it gets. All told, we think it's the best all-mountain bike out there—we invite you to see for yourself. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.

Warbird C Force eTap AXS Wide is a high-tech gravel race rig. The carbon frame features our Class 5 VRS, cutting down on the harsh bumps that take a toll on your body. Warbird's geometry emphasizes stability and comfort, for a smooth ride feel you'll be thankful for on long days in challenging conditions. Plentiful frame and fork mounts mean you can bring everything from extra bottles to a bikepacking kit on your rides. SRAM's Force eTap AXS Wide group is a wide-range 2 x 12 system with the ease of wireless electronic shifting. Saddle up and chase podiums on the best gravel race bike we've ever made.

Horsethief is one bike for many trails. From finessing local loops to savoring new destinations, Horsethief has your back. It's capable of pushing through technical terrain, instills confidence while riding aggressively, and pairs well with beautiful vistas and a post-ride beverage. - Wheel Size: 29", 27.5+ - Front Axle: 15mm Thru x 110mm - Brake Type: Disc - Fork Type: Suspension - Frame Material: Carbon - TT (Effective): 615 - Rear Axle: 12mm Thru x 157mm - Frame Type: Suspension - Carbon frame and seat stays featuring the Split Pivot suspension design with 120mm of efficient travel, remaining fully active under braking while supportive throughout its travel, paired with a 140mm suspension fork - A short stem paired with a long top tube, combined with a 67-degree head tube angle provides descending confidence, yet balances overall wheelbase length and slow speed maneuverability - Every size fits two full-size bottles in the triangle; Anything Bracket and top tube mounts boost cargo space for pack-free riding bliss - Super Boost 157 x 12mm rear hub spacing combined with a standard width bottom bracket results in a 432mm chainstay length that's 5mm shorter than previous-generations - Rear flip chip adjusts head tube angle and bottom bracket height for terrain, wheel size, and personal preference - Spec'd with a 29 x 2.5" front and 2.4" rear wheel/tire combination, but can accommodate a range of additional sizes of 27.5 x 2.8 - 3.0" and 29 x 2.2 - 2.6"

For an all-mountain bike with an adventurous side, Blackthorn C XT is the ticket. We designed the stiff carbon fiber frame around progressive geometry that feels planted on descents and climbs. We paired Blackthorn XT's 160 mm Fox Float 36 Performance Elite GRIP2 fork with a 140 mm Fox Float X Performance Elite shock that runs on our Split Pivot suspension platform for excellent small-bump compliance and support. A padded tube strap spot, top tube mount, and bottle mount allow for pack-free riding or extending your range. The Shimano XT 1 x 12 drivetrain and four-piston brakes keep you in control through testing terrain. Blackthorn C XT is a brilliant all-mountain bike equipped for a wide variety of singletrack adventures. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.

Warbird C Rival XPLR eTap AXS is built to tame the toughest terrain, with a Class 5 VRS-equipped high-modulus carbon fiber frameset. Our gravel race geometry puts you in a comfortable, confident riding position. On-bike cargo features let you gear up for long days of riding far from anywhere. SRAM's sure-shifting Rival XPLR eTap AXS drivetrain is a technological marvel with loads of gear range. As the industry's first gravel race bike, Warbird is designed and built to provide control, comfort, and speed when the going gets rough.

Horsethief is one bike for many trails. From finessing local loops to savoring new destinations, Horsethief has your back. It’s capable of pushing through technical terrain, instills confidence while riding aggressively, and pairs well with beautiful vistas and a post-ride beverage. - Wheel Size: 29", 27.5+ - Front Axle: 15mm Thru x 110mm - Brake Type: Disc - Fork Type: Suspension - Frame Material: Carbon - TT (Effective): 593 - Rear Axle: 12mm Thru x 157mm - Frame Type: Suspension - Carbon frame and seat stays featuring the Split Pivot suspension design with 120mm of efficient travel, remaining fully active under braking while supportive throughout its travel, paired with a 140mm suspension fork - A short stem paired with a long top tube, combined with a 67-degree head tube angle provides descending confidence, yet balances overall wheelbase length and slow speed maneuverability - Every size fits two full-size bottles in the triangle; Anything Bracket and top tube mounts boost cargo space for pack-free riding bliss - Super Boost 157 x 12mm rear hub spacing combined with a standard width bottom bracket results in a 432mm chainstay length that’s 5mm shorter than previous-generations - Rear flip chip adjusts head tube angle and bottom bracket height for terrain, wheel size, and personal preference - Spec’d with a 29 x 2.5" front and 2.4" rear wheel/tire combination, but can accommodate a range of additional sizes of 27.5 x 2.8 - 3.0" and 29 x 2.2 - 2.6"

Blackthorn C SLX stands out in the carbon all-mountain bike field for its capability and value. The progressive geometry feels planted on descents and steep climbs. A 160 mm Fox Float X Performance fork and 140 mm RockShox Lyrik Select+ RC shock with Split Pivot suspension design grants you the poise to plow through rock gardens, send drops, and hit doubles with confidence. Blackthorn brings you the benefits of pack-free riding, thanks to the integrated down tube strap, top tube mounts, and a bottle mount. Shimano's SLX 1 x 12 drivetrain and four-piston brakes are components you can rely on. We designed Blackthorn C SLX from the dirt up to lead the all-mountain category. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.

Cutthroat C GRX 810 2x is an immensely capable carbon bikepacking bike, designed and built to be a tour de force on the Tour Divide. Cutthroat's lightweight carbon frame with Class 5 VRS offers a finely tuned blend of stiffness for pedaling efficiency and compliance for all-day comfort. Cutthroat's drop-bar mountain bike geometry is stable when picking your way down steep, loose descents but aggressive enough for enduring a full day of headwinds. Ample cargo mounts add versatility to the way you pack. Shimano's refined GRX 810 2x drivetrain delivers effortless shifting and braking and a wide gear range so you can focus on the view.

Blackthorn SLX is all-mountain with a side of adventure. The stiff and durable aluminum frame uses our progressive trail geometry for a ride feel that's equal parts downhill ripper and stable climber. The Split Pivot suspension design builds on those qualities with supple-to-supportive travel linked to a 140 mm RockShox Super Deluxe Select+ shock. Paired with a 160 mm RockShox Yari RC fork, Blackthorn has the chops for those rugged lines you've been eyeing. On-bike cargo features like the integrated down tube strap, top tube mounts, and a bottle mount let you keep the ride essentials on your bike rather than your back. Shimano's SLX componentry means a smooth-shifting 1 x 12 wide-range drivetrain, while the four-piston brakes offer all the stopping power you'll need. Blackthorn is a clever and capable rig that brings a lot to the all-mountain table. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Purpose-Tuned Suspension The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. Progressive Geometry Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS Carbon Main Triangle with Carbon Seatstays and Aluminum Chainstays EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. Top Tube Accessory Mounts Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. Down Tube Three-Pack Mounts Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. Integrated Repair Kit Location Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) Accommodates a 26 oz Bottle All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. Internal Sleeved Cable Routing Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. Molded Frame Protection Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. Chain Guide-Compatible Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). Stealth Dropper Post Routing Compatible with 30.9mm dropper posts for true trail bike performance. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.

Horsethief is one bike for many trails. From finessing local loops to savoring new destinations, Horsethief has your back. It's capable of pushing through technical terrain, instills confidence while riding aggressively, and pairs well with beautiful vistas and a post-ride beverage. - Wheel Size: 29", 27.5+ - Front Axle: 15mm Thru x 110mm - Brake Type: Disc - Fork Type: Suspension - Frame Material: Aluminum - TT (Effective): 636 - Rear Axle: 12mm Thru x 157mm - Frame Type: Suspension - Aluminum frame and Split Pivot suspension design with 120mm of efficient travel, remaining fully active under braking while supportive throughout its travel, paired with a 140mm suspension fork - A short stem paired with a long top tube, combined with a 67-degree head tube angle provides descending confidence, yet balances overall wheelbase length and slow speed maneuverability - Every size fits two full-size bottles in the triangle; Anything Bracket and top tube mounts boost cargo space for pack-free riding bliss - Super Boost 157 x 12mm rear hub spacing combined with a standard width bottom bracket results in a 432mm chainstay length that's 5mm shorter than previous-generations - Rear flip chip adjusts head tube angle and bottom bracket height for terrain, wheel size, and personal preference - Spec'd with a 29 x 2.5'' front and 2.4" rear wheel/tire combination, but can accommodate a range of additional sizes of 27.5 x 2.8 - 3.0" and 29 x 2.2 - 2.6''

The Blackthorn C frame blends a stiff carbon fiber chassis with our progressive trail geometry and Split Pivot suspension design. The result is a well-balanced platform for an all-mountain bike that descends with gusto, rails through features, and makes climbing up for lap two as painless as possible. The Fox Float X Factory shock delivers 140 mm of travel to guide you through whatever the trail serves up. On-bike cargo features hold your tube, pump, and repair kit, and more on the frame to lighten up your hip pack—or allow you to ride pack-free. We made Blackthorn C the best all-mountain bike frame around. Take it and make it your dream bike.

Salsa Blackthorn Deore brings together performance and adventure. The aluminum frame is stiff enough to keep you on your line and durable enough to toss in a truck bed for shuttling. Our progressive geometry and Split Pivot suspension design offer a well-balanced platform for pedaling, descending, and taking on technical features. A 140 mm RockShox Super Deluxe Select shock and 160 mm RockShox 35 Gold RL fork ensure plenty of travel for gnarly drops, gaps, and other features. On-bike cargo features like a down tube strap, top tube mounts, and a bottle mount let you keep the weight of your ride gear down low on the frame so you're free to move your body without the burden of a pack. With Shimano's robust Deore 1 x 12 drivetrain backing you up, you'll find very few limits out there. Blackthorn Deore is the 29er all-mountain bike for big rides on diverse terrain. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.

Warbird is Salsa's gravel race bike, built on years of experience racing in some of the nation's premier gravel events. Its carbon fiber frameset, our carefully-honed gravel race geometry, and plentiful mounts for water, tools, and accessories make Warbird a top contender in the gravel bike world. - High-modulus carbon frame with rear thru-axle dropouts and rear rack compatibility via Rack-Lock seat collar (sold separately) - Class 5™ Vibration Reduction System (VRS) reduces fatigue caused by micro-impacts - Waxwing carbon fork featuring a 12 x 100mm thru-axle, Three-Pack and fender mounts, mid-blade eyelets, dynamo cable routing, and flat-mount brake standard - Compatible with 700c (45 mm maximum) and 650b (51 mm maximum) wheels and tires - Compatible with 1x, 2x, and electronic drivetrains - Internal sleeved cable routing, dropper post-compatible - Three water bottle mounts in the main triangle on 56–61 cm frames; two on 49–54.5 cm frames - Top tube mount for Salsa EXP Series Direct Mount Top Tube Bag and additional mount on the underside of the down tube - Accommodates a 40mm travel suspension fork and dropper post with internal routing (on 1x drivetrains only)

Horsethief is one bike for many trails. From finessing local loops to savoring new destinations, Horsethief has your back. It's capable of pushing through technical terrain, instills confidence while riding aggressively, and pairs well with beautiful vistas and a post-ride beverage. - Wheel Size: 29", 27.5+ - Front Axle: 15mm Thru x 110mm - Brake Type: Disc - Fork Type: Suspension - Frame Material: Aluminum - TT (Effective): 615 - Rear Axle: 12mm Thru x 157mm - Frame Type: Suspension - Aluminum frame and Split Pivot suspension design with 120mm of efficient travel, remaining fully active under braking while supportive throughout its travel, paired with a 140mm suspension fork - A short stem paired with long top tube, combined with a 67-degree head tube angle provides descending confidence, yet balances overall wheelbase length and slow speed maneuverability - Every size fits two full-size bottles in the triangle; Anything Bracket and top tube mounts boost cargo space for pack-free riding bliss - Super Boost 157 x 12mm rear hub spacing combined with a standard width bottom bracket results in a 432mm chainstay length that's 5mm shorter than previous-generations - Rear flip chip adjusts head tube angle and bottom bracket height for terrain, wheel size, and personal preference - Spec'd with a 29 x 2.5" front and 2.4" rear wheel/tire combination, but can accommodate a range of additional sizes of 27.5 x 2.8 - 3.0" and 29 x 2.2 - 2.6"

Timberjack is Salsa's aggressive trail hardtail. Its progressive trail geometry is stable on descents and technical sections, while the Alternator 2.0 dropouts allow for adjustable chainstay length to dial in ride characteristics. Ample accessory mounts and dual wheel size compatibility add more versatility to the package, making Timberjack a well-rounded ripper that likes to party. - 6061-T6 alloy frame - Aggressive trail geometry - 130 mm fork and dropper post provide capability in technical terrain - Alternator 2.0 dropouts expand drivetrain and setup options - Short chainstays and long front-center provide agility and stability on the trail - Front triangle space is maximized for frame bag use

Timberjack is Salsa's aggressive trail hardtail. Its progressive trail geometry is stable on descents and technical sections, while the Alternator 2.0 dropouts allow for adjustable chainstay length to dial in ride characteristics. Ample accessory mounts and dual wheel size compatibility add more versatility to the package, making Timberjack a well-rounded ripper that likes to party. - 6061-T6 alloy frame - Aggressive trail geometry - 130 mm fork and dropper post provide capability in technical terrain - Alternator 2.0 dropouts expand drivetrain and setup options - Short chainstays and long front-center provide agility and stability on the trail - Front triangle space is maximized for frame bag use - Internal cable routing - Compatible with 27.5+ or 29" wheels

Ice Cream Truck solves the problem of having to choose between a fat bike and a trail bike. It boasts a symmetric 190mm-spaced Chromoly frame, suspension-corrected 150mm-spaced fork, and sporty trail-oriented geometry. Supported by massive 4.8-inch tires, it's ready to deftly tackle nearly any terrain. - 100% Surly Chromoly steel with 44mm headtube and internal dropper post cable routing - Frame is E.D. Coated for increased life expectancy - 1-1/8-inch straight steerer fork, Chromoly steel - 100mm threaded bottom bracket shell - Front and rear thru-axles, non-offset

Timberjack is Salsa's aggressive trail hardtail. Its progressive trail geometry is stable on descents and technical sections, while the Alternator 2.0 dropouts allow for adjustable chainstay length to dial in ride characteristics. Ample accessory mounts and dual wheel size compatibility add more versatility to the package, making Timberjack a well-rounded ripper that likes to party. - 6061-T6 alloy frame - Aggressive trail geometry - 130 mm fork and dropper post provide capability in technical terrain - Alternator 2.0 dropouts expand drivetrain and setup options - Short chainstays and long front-center provide agility and stability on the trail - Front triangle space is maximized for frame bag use - Internal cable routing - Compatible with 27.5+ or 29" wheels

The All-Around Fat Bike Wednesday sits in the middle of our Trail category, but don't let that fool you into thinking that's its only use. With Wednesday, we borrowed elements from some of our Trail and Touring models to create a versatile fat tire trail bike that can truly handle anything you want to attempt. If you do an equal amount of off-road touring as you do hitting trails, Wednesday's ability to play both parts equally will suit you well. Or, if you're looking for a fat bike and don't need the fattest tires on the market, Wednesday's 26 x 4.6" tire clearance is just the ticket. - Modern mountain standards: stealth dropper post routing, 44mm headtube, suspension correction, front and rear thru-axles - Full suite of useful braze-ons: front and rear racks, multiple sets of three-pack mounts, fenders - Full-forward, short chainstay position: 26 x 3.8" tires on 80mm rims; full-rearward, longer chainstay position: 26 x 4.6" tires on an 80mm rim Specs: - Rear Dropout Configuration: Horizontal slotted with optional vertical dumpout - Rear Hub Spacing: 12 x 177mm (Surly axle included); 10 x 170mm with Surly 10/12 Adapter Washers (not included) - Front Hub Spacing: 15 x 150mm (Surly axle included) - Rear Brake: Disc - 51mm I.S. (203mm max rotor) - Front Brake: Disc - 51mm I.S. (203mm max rotor) - Head Tube: Ø44mm - Steerer Tube: Ø28.6mm (1-1/8") - Crown Race: Ø30mm (1-1/8") - Stock Headset Upper (S.H.I.S.): ZS44/28.6 - Stock Headset Lower (S.H.I.S.): EC44/30 - Front Derailleur (Clamp): High direct mount top-pull (Ø34.9mm) - Max Chainring (CL): 1x (Fat bike 170): 34T; 2x (Fat bike 170): 26/38T; 2x (Surly OD): 22/36T - Tire Clearance Frame: 26 x 4.3" (rear axle position); 26 x 3.8" (front axle position); 29 x 3.0" - Tire Clearance Fork: 26 x 5.25"; 29 x 3.0" - Rigid Fork Spec: 468 x 47mm - Max Suspension Fork Length: 511 x 51mm (Fatbike 100mm) - Bottle Mounts Frame: 2 Standard (XS - M); 3 Standard (L - XL) - Bottle Mounts Fork: 2 Three-Pack - Rack Mounts Frame: Yes (upper and lower threaded) - Rack Mounts Fork: Yes (upper, lower, and mid-blade threaded) - Fender Mounts Frame: Yes - Other Features: Internal dropper post routing compatible

Ice Cream Truck solves the problem of having to choose between a fat bike and a trail bike. It boasts a symmetric 190mm-spaced Chromoly frame, suspension-corrected 150mm-spaced fork, and sporty trail-oriented geometry. Supported by massive 4.8-inch tires, it's ready to deftly tackle nearly any terrain. - 100% Surly Chromoly steel with 44mm headtube and internal dropper post cable routing - Frame is E.D. Coated for increased life expectancy - 1-1/8-inch straight steerer fork, Chromoly steel - 100mm threaded bottom bracket shell - Front and rear thru-axles, non-offset

The All-Around Fat Bike Wednesday sits in the middle of our Trail category, but don't let that fool you into thinking that's its only use. With Wednesday, we borrowed elements from some of our Trail and Touring models to create a versatile fat tire trail bike that can truly handle anything you want to attempt. If you do an equal amount of off-road touring as you do hitting trails, Wednesday's ability to play both parts equally will suit you well. Or, if you're looking for a fat bike and don't need the fattest tires on the market, Wednesday's 26 x 4.6" tire clearance is just the ticket. "Any day of the week's a great day to ride a Wednesday." - Modern mountain standards: stealth dropper post routing, 44mm headtube, suspension correction, front and rear thru-axles - Full suite of useful braze-ons: front and rear racks, multiple sets of three-pack mounts, fenders - Full-forward, short chainstay position: 26 x 3.8" tires on 80mm rims; full-rearward, longer chainstay position: 26 x 4.6" tires on an 80mm rim Specs: - Rear Dropout Configuration: Horizontal slotted with optional vertical dumpout - Rear Hub Spacing: 12 x 177mm (Surly axle included); 10 x 170mm with Surly 10/12 Adapter Washers (not included) - Front Hub Spacing: 15 x 150mm (Surly axle included) - Rear Brake: Disc - 51mm I.S. (203mm max rotor) - Front Brake: Disc - 51mm I.S. (203mm max rotor) - Head Tube: Ø44mm - Steerer Tube: Ø28.6mm (1-1/8") - Crown Race: Ø30mm (1-1/8") - Stock Headset Upper (S.H.I.S.): ZS44/28.6 - Stock Headset Lower (S.H.I.S.): EC44/30 - Front Derailleur (Clamp): High direct mount top-pull (Ø34.9mm) - Max Chainring (CL): 1x (Fat bike 170): 34T; 2x (Fat bike 170): 26/38T; 2x (Surly OD): 22/36T - Tire Clearance Frame: 26 x 4.3" (rear axle position); 26 x 3.8" (front axle position); 29 x 3.0" - Tire Clearance Fork: 26 x 5.25"; 29 x 3.0" - Rigid Fork Spec: 468 x 47mm - Max Suspension Fork Length: 511 x 51mm (Fatbike 100mm) - Bottle Mounts Frame: 2 Standard (XS - M); 3 Standard (L - XL) - Bottle Mounts Fork: 2 Three-Pack - Rack Mounts Frame: Yes (upper and lower threaded) - Rack Mounts Fork: Yes (upper, lower, and mid-blade threaded) - Fender Mounts Frame: Yes - Other Features: Internal dropper post routing compatible

OFF-ROAD The Kessel is our aggressive trail, all-mountain, and enduro tire. Tall, angular lugs, an open tread pattern, and dual-compound rubber work together for exceptional grip on loose, technical terrain. Ramped center lugs keeps rolling resistance low, while our Durable and Ultra-Durable casings with sidewall and puncture protection keep you rolling. Kessel delivers predictable performance as you push your limits. HOW IT WORKS - Center lugs are tall, angular, and ramped in the front to keep rolling resistance low; a flat side on the back boosts braking traction. Siping conforms to the terrain for maximum traction, and wide spacing improves grip while shedding mud and debris. - Alternating side lugs are angled to add traction in every direction; wide, parallel siping digs into loose trail surfaces while cornering.

ALL-ROAD From minimum maintenance to decaying pavement, rolling hills to near vertical climbs, Rampart was made for riders who want the freedom to pick their own path no matter what the road looks like. These tires were designed and inspired by our experiences riding and racing courses with varying conditions. HOW IT WORKS - Center tread is smooth and fast-rolling for straight-line speed; thicker center tread and durable casing lasts longer even on harsh surfaces. - Transition and side lugs consist of 3-2-1 siping for traction on all road surfaces.

GRAVEL Designed with the unknown in mind, the Rutland takes the guess work out of selecting the right tire for the ride. Ramped, tightly spaced center lugs reduce rolling resistance while larger, more spaced-out shoulder and transition lugs provide grip in loose conditions. HOW IT WORKS - Center lugs are large and widely spaced for braking and acceleration grip, and ramped to lower rolling resistance. - Transition lugs are spaced out to shed mud; siping conforms to the road surface for increased traction in corners. - Side lugs are staggered to provide traction in more aggressive turns and on loose surfaces.