Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Mountain

Kona Honzo ESD
$2,699.00
If Mad Max rode a bike, it would be the Honzo ESD. It’s part Honzo, part monster, and with geometry derived from the Process X, it’s made for those who want to punish the trails. A steel frame holds a Marzocchi Bomber Z1 fork with 150mm of travel. Shimano Deore 4-piston brakes provide ample stopping power while Race Face AR 30 rims and burly Maxxis rubber stand up to the roughest trails. This is the Warrior of the Wasteland. Kona Cromoly Very few materials offer as much shock absorption, durability and supple-ride characteristics as steel. We’ve never strayed from cycling’s original material and have worked tirelessly to adapt, refine and innovate Kona Cromoly framesets as rider demands continue to evolve. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance, the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance, and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted.
Kona Lava Dome *Prepay Only*
$849.00
We should be getting MD, LG, and XL Lava Dome around April or May 2021. If it says "In store now," it's not in store yet but available for prepurchase now. The Lava Dome is kind of like your best friend, but in bike form. It’s awesome in the dirt. It’s awesome to rally around town. It’s awesome poking around neighborhood singletrack, and it does it all in a dependable way. The 2021 Lava Dome features the new Microshift Advent 9-speed drivetrain with a clutch rear derailleur as well as sleek internal cable routing and dropouts. This year the 29" wheels get wider and stronger and can accept up to a 2.6" tire making it ready for everything in its path! Kona 6061 Aluminum Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing’s wall thickness can be increased or decreased as well as shaped, so we can fine-tune a particular frame’s strength and ride characteristics depending on its intended application. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed.
Kona Unit
$1,299.00
If Leonard Smalls were to trade out his beefed-up Honda VT500 and pedal his way across the Arizona desert, we have no doubt it'd be aboard the Unit. Burly. Steel. Hardcore. Mean. Mean? Sure. The Unit does not mess around. Its single-speed design and Cromoly frame make its simplicity shine and keep the moving parts long-lasting for those big excursions. Gear mounts on the fork legs and several options for mounting water bottles mean you won’t go without any of the necessary gear no matter where you’re traveling. Reynolds 520 Cromoly Reynolds 520 tubes are mandrel-butted for accurate profiles and available in a wide range of shapes. Weight savings from butting provides competitively priced, light framesets that are noticeably compliant on the road or the trail, and are guaranteed to last a lifetime. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. 44mm Head Tube 44mm oversized heatubes allow us to run tapered steerer forks by using a large external lower cup headset bearing. The larger diameter steerer tube adds considerable stiffness and will increase responsiveness to the front end, improving all-around performance. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted.
Kona Unit X Prepayment spring 2021
$1,549.00
The Unit X has become a cult favorite among die-hard Kona fans. Maybe it’s the Cromoly frame. Maybe it’s the fact that it’s a bikepacking monster, or its SRAM SX Eagle 12-speed drivetrain, or modular dropouts which give you the ability to run it as a single speed if that’s your thing. Maybe it’s because the rigid fork makes it that much more of a classic. We may never know why the Unit X is such a popular bike, but we can only guess it’s because it is one of the most practical machines in our lineup. Reynolds 520 Cromoly Reynolds 520 tubes are mandrel-butted for accurate profiles and available in a wide range of shapes. Weight savings from butting provides competitively priced, light framesets that are noticeably compliant on the road or the trail, and are guaranteed to last a lifetime. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. 44mm Head Tube 44mm oversized heatubes allow us to run tapered steerer forks by using a large external lower cup headset bearing. The larger diameter steerer tube adds considerable stiffness and will increase responsiveness to the front end, improving all-around performance. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted.
All-City Gorilla Monsoon Frameset
$950.00
Ready to start your Gorilla Monsoon dream build? Or just want to put together a spec sheet with guaranteed parts compatibility? Get in touch for a custom build consultation. Designed to handle double track, gravel, bikecamping, and just plain chasing good times, this nimble, do-it-all dirt solution is ready to send cross racers, dirt tourists, and backcountry explorers far into the unknown with comfort, style, and elegance. Available in seven frame sizes — including 43cm for the first time — the Gorilla Monsoon is tweaked for long days in the saddle and built around 27.5 x 2.4" tires with clearance for 700c x 42mm. - Made from All-City's 612 Select steel tubing with signature thru-axle dropouts - Features a matching bi-plane crown steel fork - Fork is compatible with Surly 8- and 24-Pack racks - Mounts for front and rear racks and fenders - Flat-mount disc brakes - Three water bottle mounts on the frame - Provision for stealth dropper seatpost routing - Signature All-City Shot Collar seatpost clamp - E.D. coated for durability and rust prevention - Built around 27.5 x 2.4" tires with clearance for 700c x 42mm
Surly Big Fat Dummy
$3,175.00
The Big Fat Dummy is a long tail cargo bike that took a few too many doses of growth hormones. At first glance, you might say that Surly just put bigger tires on a Big Dummy. But if you said that, you'd actually be very wrong so just… don't. Think of Big Fat Dummy as more of a second or third cousin to Big Dummy rather than a brother. They share some of the same DNA and look sort of similar, but they're two very different bikes and really only interact when they both reach for the potato salad spoon at that family reunion that no one really wants to be at anyway. Now that that's out of the way, let's get down to the nitty gritty of what makes this hulking beast of a bike tick. Surly's goal with designing a cargo bike around fat tires was to create the most stable, stiff, and traction-laden ride possible while hauling a ton of stuff. Big Fat Dummy has a longer toptube and slacker headtube than its more svelt cousin giving it a nice, predictable, and stable ride. They also used thinner, lighter tubing to construct its cargo area so while it's an overall burlier bike, there's not much difference in weight. Big Fat Dummy accepts either 10mm or 12mm axles in the rear with a spacing of 190/197mm. That big ol' spacing equates to one thing: tire clearance for days. Big Fat Dummy maxes out at a massive 26 x 5.25" tire.* While that large of a tire provides the most traction and stability a bike can possibly offer, it's also a lot of rubber to push and might not be for everybody. Luckily, Big Fat Dummy is also a blast to ride with 3" tires too. It uses the same 100mm suspension-corrected fork as the Wednesday, meaning if you want to add a little squishy squishy to your ride, you can throw a Bluto on and let ‘er rip. If you intend to carry a passenger on your Big Fat Dummy, Surly requires use of their Dummy Rail Collars. These provide a secondary retention system for the rack, as well as stiffen the rack system. In addition, a stoker handlebar set up, found on tandem bicycles, is recommended as well. Make sure to check with seat post manufacturer for stoker handlebar compatibility. All Big Fat Dummy framesets and bikes ship with a Dummy deck, rails, bags, and the aforementioned Dummy Rail Collars so you can immediately start hauling cargo — human or otherwise. Big Fat Dummy is ready and willing to carry all sorts of crap — literally. It's already in use on an organic farm in Ecuador so it's likely that it's hauled some form of manure by now. *Using a 26 x 5.25" tire will cause some drivetrain limitations.
Surly Big Fat Dummy Frameset
$1,650.00 - $1,730.00
The Big Fat Dummy is a long tail cargo bike that took a few too many doses of growth hormones. At first glance, you might say that Surly just put bigger tires on a Big Dummy. But if you said that, you'd actually be very wrong so just… don't. Think of Big Fat Dummy as more of a second or third cousin to Big Dummy rather than a brother. They share some of the same DNA and look sort of similar, but they're two very different bikes and really only interact when they both reach for the potato salad spoon at that family reunion that no one really wants to be at anyway. Now that that's out of the way, let's get down to the nitty gritty of what makes this hulking beast of a bike tick. Surly's goal with designing a cargo bike around fat tires was to create the most stable, stiff, and traction-laden ride possible while hauling a ton of stuff. Big Fat Dummy has a longer toptube and slacker headtube than its more svelt cousin giving it a nice, predictable, and stable ride. They also used thinner, lighter tubing to construct its cargo area so while it's an overall burlier bike, there's not much difference in weight. Big Fat Dummy accepts either 10mm or 12mm axles in the rear with a spacing of 190/197mm. That big ‘ol spacing equates to one thing: tire clearance for days. Big Fat Dummy maxes out at a massive 26 x 5.25" tire.* While that large of a tire provides the most traction and stability a bike can possibly offer, it's also a lot of rubber to push and might not be for everybody. Luckily, Big Fat Dummy is also a blast to ride with 3" tires too. It uses the same 100mm suspension-corrected fork as the Wednesday, meaning if you want to add a little squishy-squishy to your ride, you can throw a Bluto on and let ‘er rip. If you intend to carry a passenger on your Big Fat Dummy, Surly requires use of their Dummy Rail Collars. These provide a secondary retention system for the rack, as well as stiffen the rack system. In addition, a stoker handlebar set up, found on tandem bicycles, is recommended as well. Make sure to check with seat post manufacturer for stoker handlebar compatibility. All Big Fat Dummy framesets and bikes ship with a Dummy deck, rails, bags, and the aforementioned Dummy Rail Collars so you can immediately start hauling cargo — human or otherwise. Big Fat Dummy is ready and willing to carry all sorts of crap — literally. It's already in use on an organic farm in Ecuador so it's likely that it's hauled some form of manure by now. *Using a 26 x 5.25" tire will cause some drivetrain limitations. For all the nuts and bolts of compatibility read Surly's blog on the subject.
Salsa Blackborow Frameset
$1,399.00
Blackborow is Salsa’s "dream big" cargo fat bike, best paired with an unlimited imagination. The extended wheelbase and rear stays offer huge carrying capacity via abundant frame and fork braze-ons, supporting room for four full-sized panniers on the beautifully engineered rear rack. Top-shelf, double and triple-butted, heat-treated 6066-T6 aluminum tubing is used throughout the frame. Additionally, the tubing is strategically shaped and formed for additional stiffness and strength optimization in key stress areas. The front end is compatible with all our rigid fat bike forks and also fat-specific suspension forks. When Blackborow is sensibly loaded, the bike still feels well balanced and is a pleasure to ride on winding trails compared to other long-tail cargo bikes. Featuring carbon construction with an aluminum steerer, the Kingpin Fork is lightweight and durable, and features an amazing array of accessory bosses to maximize its capabilities: dual sets of Three-Pack bosses on each leg accept bottle cages or our Anything Cage accessories, lowrider mounts work with our Down Under front rack for a traditional touring setup, and internal dynamo hub wire routing keeps the front end clean for those upgrading to dyno hubs. Blackborow is compatible with 26 x 3.8–4.33" tires on up to 100mm rim, 27.5 x 3.25–4.0", or 29 x 2.3–3.0". The ability to run multiple wheel and tire sizes allows you to customize the experience and fine-tune the ride height as needed. A removable direct-mount front derailleur bracket allows for a clean 1x build, but it’s also compatible with 2x drivetrain setups. Plus, it’s got internal routing for a dropper post. Blackborow is all about new possibilities, and owners will find themselves able to merge an array of other interests into their two-wheeled adventures.
Salsa Blackborow GX Eagle
$3,299.00
Blackborow is Salsa’s "dream big" cargo fat bike, best paired with an unlimited imagination. The extended wheelbase and rear stays offer huge carrying capacity via abundant frame and fork braze-ons, supporting room for four full-sized panniers on the beautifully engineered rear rack. Top-shelf, double and triple-butted, heat-treated 6066-T6 aluminum tubing is used throughout the frame. Additionally, the tubing is strategically shaped and formed for additional stiffness and strength optimization in key stress areas. The front end is compatible with all our rigid fat bike forks and also fat-specific suspension forks. When Blackborow is sensibly loaded, the bike still feels well balanced and is a pleasure to ride on winding trails compared to other long-tail cargo bikes. Featuring carbon construction with an aluminum steerer, the Kingpin Fork is lightweight and durable, and features an amazing array of accessory bosses to maximize its capabilities: dual sets of Three-Pack bosses on each leg accept bottle cages or our Anything Cage accessories, lowrider mounts work with our Down Under front rack for a traditional touring setup, and internal dynamo hub wire routing keeps the front end clean for those upgrading to dyno hubs. Blackborow is compatible with 26 x 3.8–4.33" tires on up to 100mm rim, 27.5 x 3.25–4.0", or 29 x 2.3–3.0". The ability to run multiple wheel and tire sizes allows you to customize the experience and fine-tune the ride height as needed. A removable direct-mount front derailleur bracket allows for a clean 1x build, but it’s also compatible with 2x drivetrain setups. Plus, it’s got internal routing for a dropper post. Blackborow is all about new possibilities, and owners will find themselves able to merge an array of other interests into their two-wheeled adventures. Salsa's Blackborow GX includes an array of high-quality components to support the remotest excursions. SRAM's GX Eagle drivetrain features strong and lightweight components as well as a wide-range 12-speed cassette for tackling quickly varying terrain. A set of SUN Ringle Mulefut rims have a plenty-wide 80mm footing, perfect for floating the 45NRTH Dillinger 27.5 x 3.8" tires. A suite of tried-and-true Salsa cockpit components and a WTB Volt saddle round out the build.
Salsa Cassidy Aluminum Frame
$2,299.00
The Cassidy Alloy Frame gives you the confidence to seek out the steepest, most technical trails out there. Its stiff and durable aluminum frame stands up to trail punishment, whether you're enjoying a full day of shuttle runs, barreling through rugged rock gardens, or hitting drops and gaps. 165 mm of Split Pivot rear suspension offers progressive travel for the stoutest trails, with superior pedaling efficiency and consistent braking traction to boot. Build it up and go big.
Salsa Cassidy Carbon Frame
$3,399.00
Nobody knows what you like as well as you do. When you're hurtling down the trail at high speed, everything needs to be dialed. With 165mm of rear travel, plus our Split Pivot suspension system for pedaling efficiency and consistent braking traction, Cassidy is easy-up, easy-down. Take the Cassidy Carbon Frame, hand-select your dream team of parts, and build the enduro sled you've always wanted.
Salsa Fargo Ti Frameset
$2,999.00
The Fargo is Salsa’s original drop bar mountain bike. A bit of a cult classic, it’s designed for mixed surface riders and bikepackers that like variety in their routes, with the capability to carry everything needed when out for days on end. Carefully crafted in 3/2.5 seamless triple-butted Titanium tubing, paired with Salsa’s new Firestarter Carbon boost fork, this frameset is ready for any dream-bike build. - Titanium tube set provides appropriate stiffness and compliance for fantastic ride quality - Alternator Dropouts v1.5; split-able version of the renowned Alternator Dropout for ultimate drivetrain versatility, including belt drive and singlespeed setups - Adjustable rear spacing can accommodate 27.5+ or 29-inch wheels, and on sizes Small to X-large, 29+ - Firestarter 110 Carbon Deluxe boost fork features high modulus carbon construction, tapered steer tube and four sets of Three-Pack mounts to offer incredible load-carrying possibilities. Mid-blade mounts for low rider racks. Internal routing for Boost spacing Dynamo hubs and fender mounts (compatible with 29 x 2.2-inch tire maximum clearance) - Fork now has a 51mm offset and is designed for 180mm maximum rotors, with tire clearance for 27.5 x 2.8-3.0-inch or 29 x 2.2 – 3.0-inch sizes - Frameset includes front and rear Salsa Deadbolt Ultralight thru-axles, Cane Creek 40 Headset and Salsa Lip-Lock seat collar
Salsa Horsethief Carbon Frame
$2,999.00
The Horsethief Carbon Frameset is where your dream trail bike begins. The Horsethief frameset can be built with either 29-inch or 27.5-plus wheels, and the flip chip allows for subtle geometry tweaks. The Split Pivot rear suspension technology and 120mm Fox Float DPS Performance Elite shock are a recipe for incredible small bump compliance and traction. With this solid foundation in place, just add the parts that make you happy—we can’t wait to see what you do with it.
Salsa Rustler Carbon Frame
$2,999.00
Given the choice between clearing challenging lines and taking them on with gusto, you prefer the latter. If this sounds like you, the Rustler Carbon frame is the perfect platform for your ultimate trail bike build. The Split Pivot rear suspension system with a Fox Float DPS Performance shock, flip chip geometry adjustment, and 27.5 x 2.3–2.8-inch tire clearance let you build the bike that suits your playful style. Get excited for a trail-roosting rig with impeccable pedaling efficiency—a surefire recipe for fun on many trails.
Salsa Rustler Carbon Frame
$2,799.00
The Rustler is Salsa’s playful and dynamic technical trail bike. It rewards the rider that’s willing to throw some body language into the way they tackle trails. Seek out features in the trail to find your flow; pop off every little rock and root, manual the rhythm sections, rail each corner, and boost every double.
Salsa Rustler Carbon XTR
$7,499.00
Rustler Carbon XTR goes all-in on singletrack stoke. We started with a lightweight carbon frame and playful geometry, plus the climbing prowess and small-bump compliance of Split Pivot. Next, we added 27.5" carbon wheels to keep it as nimble as possible. Then, we gave it a Fox Float 36 Performance Elite Grip2 fork with 150mm of travel and a Fox Float DPS Performance Elite 130mm shock to soak up trail impacts. The finishing touch is Shimano’s flawless XTR drivetrain. Put it all together, and you have a bike that uses all of the technology at its disposal to maximize trail thrills. Rustler XTR is a carbon 27.5 trail bike that loves to get rowdy.
Salsa Spearfish Carbon Frame
$2,999.00
Spearfish was designed under a simple premise: that efficiency and precision result in speed. Whether pursuing an ultra-endurance record or working to keep the hard chargers off your back on local training laps, Spearfish’s efficient Split Pivot suspension design rewards the rider. The lightweight carbon frame and 100mm Fox Float DPS Performance Elite shock provide a platform for the ultimate progressive XC bike. Eliminate excuses with Spearfish.
Salsa Timberjack Ti Frame
$2,699.00
The Timberjack Ti absolutely owns all paths — wooded, skinny, and flowy, making you the master of every ride thanks to its multi-talented character. The frame is constructed from custom, top-shelf titanium with a fast-handling geometry to deliver the stiffness needed to whip through tight turns and accelerate with instant power, while super-short chainstays make it easy to lift over obstacles so you can stay with the flow. Run it as a 27.5+ with up to 3-inch tires for maximum fun, or go for efficiency with a 29er wheelset — with Salsa's Alternator Dropouts you get an impressive grip of wheelset and drivetrain options to suit your style and intention.
Jamis Hardline C2
$6,299.00
If pedaling to explore the entire mountain and shredding every downhill is your thing, the Jamis Hardline C2 delivers. Its 160mm Fox Factory 36 FLOAT fork keeps your tire glued to your line of choice with another 160mm of rear travel lying in wait, built on a Fox Float DPX2 Factory Series Kashima EVOL shock and 3VO, one of the most advanced suspension designs available. Its Stans Flow MK3 wheels and Vittoria Martello tires rail on sculpted park runs and rip through rooty enduro tracks without batting an eye. A Truvativ crank drives power into SRAM's 1x12-speed X01 Eagle drivetrain that shifts fast enough to keep up with your rowdiest descents, while providing a wide range that lets you self-shuttle and proudly earn your fun... and some bragging rights. Push that fun envelope on the way down, because the 4-piston Magura MT7 brakes harness fade-free power from another realm to keep you just this side of too-fast, all while a Race Face Aeffect R dropper post supports you in a dialed position so you get the most out of every inch of trail.
Jamis Hardline C3
$4,549.00
If pedaling to explore the entire mountain and shredding every downhill is your thing, the Jamis Hardline C3 delivers. Its 160mm Fox Rhythm 36 fork keeps your tire glued to your line of choice with another 160mm of rear travel lying in wait, built on a Fox Float DPX2 Performance Series EVOL shock and 3VO, one of the most advanced suspension designs available. Its RaceFace ARC wheels and Vittoria Martello tires rail on sculpted park runs and rip through rooty enduro tracks without batting an eye. A Race Face crank drives power into Shimano’s 1x12-speed SLX drivetrain that shifts fast enough to keep up with your rowdiest descents, while providing a wide range that lets you self-shuttle and proudly earn your fun... and some bragging rights. Push that fun envelope on the way down, because the 4-piston Ice-Tech SLX brakes harness fade-free power from another realm to keep you just this side of too-fast, all while a Race Face Aeffect R dropper post supports you in a dialed position so you get the most out of every inch of trail.
Jamis Portal C2
$6,299.00
Portal - noun: DOOR, ENTRANCE; especially a grand or imposing one. Pass boldly through to the other side and impose on the most fun you've had on two wheels with the Jamis Portal C2. Its high-modulus carbon fiber frame swings your rear wheel through 130mm of micro-tracking 3VO suspension, renowned for its trail-contouring ability that goes hand-in-hand with big-hit burliness. A 130mm Fox 34 FLOAT fork easily handles the rough stuff up front, ensuring your trail-spec'd Stan's NoTubes Arch MK3 wheels track right where you want them, ready and willing to dig deep, wrapped in Vittoria's Martello tubeless tires. The entire trail opens to you when you've got the proven combo of a huge-range SRAM XO1 Eagle 12-speed drivetrain and Magura MT8 brakes to ensure you have the leverage when you need it, the speed when you want it, and the power to reign it all in when the speed gets critical. And, the Portal will feel as familiar as walking out your front door thanks to a rider-tuned Race Face cockpit, and an instantly dialable stance, courtesy of your Race Face Aeffect dropper.
Kona Big Honzo
$1,299.00
The Big Honzo is a killer bike for the price. It's got everything you need and nothing you don't. Boost spacing and Shimano hubs hold WTB rims and 27.5+ Ranger tires. Shimano hydraulic disc brakes and a Deore 11-speed drivetrain keep the cockpit feel consistent and intuitive. This is the perfect bike for when you need a little extra grip rolling over tricky roots and rocks. Kona 6061 Aluminum Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. Tough, durable, and light alloys, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing's wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame's strength and ride characteristics depending on its intended application. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it's needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer dimension of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. 27.5"+ Wheels The benefits of the 27.5-inch wheel are simple: they roll over obstacles and track better than 26-inch wheels, but are more maneuverable and nimble than 29-inch ones.
Kona Big Honzo DL
$1,699.00
The Big Honzo DL plays host to a bunch of upgrades for 2021. The new RockShox 35 Silver TK Solo Air fork provides 130mm of plush suspension. The Shimano Deore 12-speed drivetrain keeps things shifting smoothly and Shimano hydraulic disc brakes keep speed in control. The adjustable travel TransX dropper post ensures you’re always in the optimal riding position, and tubeless-ready 27.5+ WTB rims and tires keep you rolling over anything in your path. Kona 6061 Aluminum Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing’s wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame’s strength and ride characteristics depending on its intended application. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance, the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance, and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. 27.5"+ Wheels The benefits of the 27.5-inch wheel are simple: they roll over obstacles and track better than 26-inch wheels, but are more maneuverable and nimble than 29-inch ones.
Kona Blast
$999.00
The Blast is the perfect all-rounder for the person looking to ride off-road or cruise around the backwoods bike paths. It features the updated RockShox Judy Silver TK Solo Air fork with 100mm of travel, as well as a Shimano Deore drivetrain and disc brakes. If you’re a fan of plus bikes, you can run up to 2.8" tires on the WTB ST i27 TCS rims. The Blast is where the mountain meets functionality at a great price. Kona 6061 Aluminum Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing’s wall thickness can be increased or decreased as well as shaped, so we can fine-tune a particular frame’s strength and ride characteristics depending on its intended application. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems. 27.5" Wheels The benefits of the 27.5-inch wheel are simple: they roll over obstacles and track better than 26-inch wheels, but are more maneuverable and nimble than 29-inch ones.
Kona El Kahuna
$2,899.00
The Kahuna is one of our best-selling hardtails. People love its simplicity and practicality. We brought that ethos to the El Kahuna and built a bike that was multipurpose—capable of riding the local singletrack for hours on end and still have enough battery to go get the groceries on the way home. A Shimano E6100 pedal-assist motor is powered by a semi-integrated 504 Wh battery. A 100mm Suntour XCR 34 Air fork provides just the right amount of suspension to absorb smaller hits on the trail. Shimano Deore brakes provide reliable stopping power. WTB ST i27 TCS 2.0 29" rims are wrapped with super grippy WTB Trail Boss 2.25" tires making the El Kahuna the perfect all-arounder. Kona 6061 Aluminum Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. Tough, durable, and light alloys, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing's wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame's strength and ride characteristics depending on its intended application. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it's needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems.
Kona Hei Hei
$2,599.00
If you’re looking for a bike that is a little bit XC and a little bit rock n’ roll, look no further than the Hei Hei. Our Race Light 6061 Aluminum frame has been perfectly designed to be fast and strong. A 120mm RockShox Revelation RC DebonAir fork keeps things controlled on the front end while a Monarch RL Solo Air rear shock provides 100mm of travel and keeps the back end in check. A Shimano SLX/Deore 12-speed drivetrain is a perfectly durable and price-friendly option to keep the Hei Hei at the forefront of the most-wanted aluminum XC steeds. Kona Race Light 6061 Aluminum Kona Race Light 7005 and 6061 are lighter, more performance-oriented fabrications of our 7005/6061 tubing. Designed to meet Kona’s discerning race specifications, Race Light 7005/6061 are custom butted to create thicker tubes at weld areas and important parts of the frame, providing incredible strength and torsional integrity to the feel of the ride. We remove wall thickness in other parts of the frameset to lighten up the bike, giving the perfect balance between quickness and stiffness. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance, the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance, and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. Fuse Independent Suspension The Fuse Independent Suspension is designed to be as lightweight and efficient as possible, oriented specifically for the demands of the modern XC trail rider. Like all of our suspension platforms, the Fuse IS is designed around a single pivot with a predictable leverage ratio for a responsive, snappy feel. Built for our Hei Hei platform, the frame features a seat stay that relies on small degrees of frame flex rather than a pivot at the seat and chainstay junction. The result is an efficient, laterally stiff suspension system that takes weight savings to a new level.
Kona Hei Hei CR
$4,499.00
The Hei Hei CR marries practical and sleek to produce a workhorse of a bike. A Shimano XT/SLX 12-speed drivetrain provides reliable shifting across a broad 10-51t gear range. A Fox Float 34 SC Performance fork and DPS Evol Performance rear shock add 120mm of suspension front and rear. The Kona Race Light Carbon frame with updated geometry is the perfect base for riders whether they’re smashing lines between the tape or on their local singletrack. Kona Carbon Designed to be lightweight and built to demanding standards. Carbon fiber has long been praised for its weight and strength, but rather than chase grams, we place our efforts on the performance that is possible when the right high-modulus fibers are in the right places. Our designers work very closely with our manufacturer to ensure there is no compromise to the desired ride characteristics, durability and—finally—weight stipulations that we expect from our bikes. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance, the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance, and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. Fuse Independent Suspension The Fuse Independent Suspension is designed to be as lightweight and efficient as possible, oriented specifically for the demands of the modern XC trail rider. Like all of our suspension platforms, the Fuse IS is designed around a single pivot with a predictable leverage ratio for a responsive, snappy feel. Built for our Hei Hei platform, the frame features a seat stay that relies on small degrees of frame flex rather than a pivot at the seat and chainstay junction. The result is an efficient, laterally stiff suspension system that takes weight savings to a new level.
Kona Hei Hei CR/DL
$5,999.00
The Hei Hei CR DL is a bike that wins big. It’s bagged three 24-hour solo world championships under Cory Wallace. It’s won huge stage races and its bagged world records. The gorgeous Kona Race Light Carbon frame features tasty components like the RockShox Sid Luxe Ultimate 120mm fork and rear shock and a SRAM XX1 drivetrain. Ultra-powerful SRAM G2 RSC brakes give you control when you need it most. WTB KOM Light i27 TCS rims are laced to smooth-rolling DT Swiss 350 hubs. Go fast and win big with the Hei Hei CR DL. Kona Carbon Designed to be lightweight and built to demanding standards. Carbon fiber has long been praised for its weight and strength, but rather than chase grams, we place our efforts on the performance that is possible when the right high-modulus fibers are in the right places. Our designers work very closely with our manufacturer to ensure there is no compromise to the desired ride characteristics, durability and—finally—weight stipulations that we expect from our bikes. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance, the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance, and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. Fuse Independent Suspension The Fuse Independent Suspension is designed to be as lightweight and efficient as possible, oriented specifically for the demands of the modern XC trail rider. Like all of our suspension platforms, the Fuse IS is designed around a single pivot with a predictable leverage ratio for a responsive, snappy feel. Built for our Hei Hei platform, the frame features a seat stay that relies on small degrees of frame flex rather than a pivot at the seat and chainstay junction. The result is an efficient, laterally stiff suspension system that takes weight savings to a new level.
Kona Honzo
$1,499.00
Often imitated, but never duplicated, the Honzo is a part of Kona’s foundation. The Honzo gets a geo update that slackens the headtube to 67 degrees and steepens the seat tube angle. With a Shimano Deore drivetrain, hydraulic disc brakes, and a long-travel adjustable dropper post, it’s a killer bike for the money. Squish is provided by a RockShox Recon RL Solo Air fork. Folding bead tubeless Maxxis rubber surrounds the WTB ST i30 TCS rims, providing proper grip on any surface. Kona 6061 Aluminum Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing’s wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame’s strength and ride characteristics depending on its intended application. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance, the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance, and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted.
Kona Honzo DL
$2,299.00
The Honzo DL gets updated geometry as well as a suspension refresh. A slacker 66-degree headtube angle and a beefed up 140mm RockShox Revelation RC Debonair fork laugh in the face of steep terrain. Shorter seat tube lengths mean you’re now able to run bigger droppers for more adjustable travel with the TranzX +RAD post. We’ve added adjustable dropouts giving you the option to run the bike as a single speed. Whether you’re looking for an aggressive all-mountain ripper or a new addition to your mountain quiver, you can’t go wrong with the Honzo DL. Kona 6061 Aluminum Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing’s wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame’s strength and ride characteristics depending on its intended application. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance, the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance, and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted.
Page 1 of 3 Next page