Filter By:
- Bells/Noise Makers (8)
- Mirrors (6)
- Reflective Items (3)
- Show More Brands
- Show Fewer Brands
Safety
$9.00
Let everyone know your coming with Sunlite's I Love My Bike Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.
$15.00
• Plastic body w/ ball joint
• Acrylic convex mirror
• Press fit into bar end
$7.00
Add a little flair and extra visibility to your ride. A Saddle Charm adds character to the tail of your whip! Made of our woven handlebar tape, a sturdy thread locking loop, and highly reflective 3M trim, our Saddle Charms can be attached to the rails of your saddle, the bag loops on a Brooks England saddle, or just about anywhere on your bike or bag for a pop of added safety and fun. They may even give you a bit of extra luck.
$25.00
Announce your presence with Portland Design Works' Alexander Graham Bell. Built to replace a 10mm 1 1/8 headset spacer, this bell is a classy addition to your rig without sacrificing any of your precious handlebar real estate.
- Polished brass bell
- Replaces a 10mm 1 1/8" headset spacer
- Quick-reflex alloy clapper
- Lifetime PDWarranty
$14.00
The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too!
- Dome Diameter: 48mm (1.9")
- Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters
$22.00
The Mirrycle mounts in minutes with the wrench that is included. The mirror is a 3" round, convex glass mirror with a wide field of view. The mirror is adjustable to any viewing angle.
- Fits inside handlebars with 13.75mm – 22.5mm (.54" to .875") inside diameter
$20.00 - $23.00
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality.
The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell.
THE LOOK
Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable.
THE SOUND
Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord.
THE MOUNT
What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all).
What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.
$20.00 - $23.00
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality.
The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell.
THE LOOK
Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable.
THE SOUND
Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord.
THE MOUNT
What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all).
What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.
$40.00
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? The Oi Luxe is a bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Oi Luxe is luxe in every sense of the word. Its CNC machined ringer and brass dinger, stitched 'vegan' leather shim, and metal injection molded stainless steel make it a pleasure to have on your handlebars.
- Fits 22.2mm handlebars
- Weight: 31.5g
$4.00
The Jandd Reflector Mount allows riders to attach a reflector to a rack.
$13.00
Features
- Construction: Molded thermoplastic with ultra-clear 800R glass lens and backside reflector for added safety
- Adjustability: Flexible neck delivers optimum viewing angle
- Compatibility: Fits any bar with up to 1" (25.4mm) diameter
- Quick Assembly: Tool-free mount with included thumb screw
A tough bell with a rotary striker.
– Compact 50mm brass dome for a bright and resonant ring
– Aluminum striker and clamp
– Operable from multiple positions on the handlebar. Wheel turns clock-wise or counter-clockwise. Easily click off multiple dings or a single ding
– Fits on 22.2, 24.0 and 25.4mm OD bars
– Stealthy matte black finish
$20.00 - $22.00
– Strong retro appeal
– All metal construction with durable plated steel clamp and striker
– Spring-loaded lever strike mechanism (easy to operate even with winter gloves on)
– Clamp fits bar diameters ranging from 22.2mm to 26.0mm
– Dome measures 55mm in diameter
– Brass or aluminum domes. Brass is more resonant. Alloy is more tarnish-resistant
– Multiple finishes including unpolished alloy, polished alloy, polished brass, copper finished brass, brushed copper/lacquered finish brass, chrome-plated brass, and Neo Black brass
– Made in Japan
$18.00
CatEye's handlebar-end mounted mirror is sturdy and sure to last through heavy duty riding. It's fully adjustable so you can comfortably see what's behind you. This scratch resistant mirror installs easily and gives a wide-angle view.
$20.00
The sleek and ultralight BM-45 bar end mirror easily attaches to drop and flat bars, making it perfect for all bikes. Constructed of aluminum and glass for durability and nearly distortion-free viewing, the BM-45 represents the height of handlebar mirror construction and design. Minimal projection from the bar means never having to sacrifice clean aesthetics for critical rear-view safety again.
$25.00
- Made in the USA
- Wide field of view with three pivot points for total adjustability
- Lightweight and optically correct
- Fits helmet visors and eyeglasses; will fit helmets with adapter
Page 1 of 1