Packs/Racks/Baskets

Topeak's SideKick Wedge Pack features a unique, positive locking 2-piece mount that makes attaching and removing the pack a snap. Its unique side-opening design makes accessing your gear quick and easy and you'll have plenty of room for carrying tubes, a C02 pump, wallet, keys and whatever else you need. For low-light conditions, a 3M reflective strip adds safety and its semi-rigid construction makes the Wedge Pack durable and tough.

Topeak's SideKick Wedge Pack features a unique, positive locking 2-piece mount that makes attaching and removing the pack a snap. Its unique side-opening design makes accessing your gear quick and easy and you'll have plenty of room for carrying tubes, a C02 pump, wallet, keys and whatever else you need. For low-light conditions, a 3M reflective strip adds safety and its semi-rigid construction makes the Wedge Pack durable and tough.

This wedge bag has two compartments with foam inserts to keep tools jiggle free. - Features durable 1000 denier, wrap-around zipper, extra-long 3M reflective strip for added safety at night and a zippered expanding main compartment for added storage. Mounts and removes quickly with the innovative QuickClick system. - Built-in rain covers and two-piece rail fixer for easy removal Tool Kit Includes: - 2, 3, 4, 5, and 6mm Allen wrenches - T25 Torx - Phillips screwdriver - 8 and 10mm open wrenches - Universal Chain Tool with chain hook - 2 Tire Levers - Flypaper Glueless Patch Kit

- The perfect quick-mount rear rack system attaches to road, cross, hybrid or touring bike seatstays. This one-size-fits-all front rack features an innovative top plate that adjusts to level independent the seatstay angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags.

The perfect quick-mount front rack system for MTB suspension forks or rigid forks without rack eyelets. This one-size-fits-all front rack features an innovative top plate that adjusts to levels independently from the fork angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook-and-loop-strap mounting system cinches down tight to keep the load stable and allows mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags. - Attachments: Fork with hook-and-loop straps - Adjustment: Strut slots - Material: Aluminum / Engineering grade polymer / Nylon straps - Compatibility: Topeak MTX / RX TrunkBags, RackTime Snapit / Vario system bags - Max Load: 10kg / 22lb - Clamp for front reflector - Size: 37. 4 x 32.2 x 16.5cm / 14.7" x 12.7" x 6.5" - Weight: 910g / 2.01lb

Topeak's Tri DryBag keeps your gear dry no matter the weather. Composed of water-resistant fabric, this top tube pack sports a flap that folds over the opening and prevents water penetration. It attaches via hook-and-loop straps and you'll have plenty of room for carrying your phone, wallet, tools and energy bars in this streamlined bag.

Topeak's Trolley Tote rear basket provides excellent versatility and convenience. Handy features include a telescoping handle and wheels which make the Trolley Tote perfect for shopping and running errands. It's made from tough plastic with an aluminum handle, and folds flat for storage. And, it's compatible with Topeak's QuickTrack rack system for easy on and off.

Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches

Thule's Pack n' Pedal Side Frames mount quickly and easily to the sides of their Pack 'n Pedal Tour Rack (sold separately). They allow you to use any model of pannier for increased luggage capacity and a lower center of gravity.

Allows Thule Yepp Maxi to be installed on a bike with a rear rack with a load capacity of at least 35 kg/78 lbs and the ability to carry seat and bike bags. Features: - Fits rear racks measuring 11-17cm/4.5-6.7" - For use on rear racks with a load capacity of at least 35kg/78lbs

A sturdy steel rack which allows for mounting Thule Yepp Maxi Easyfit and Thule Yepp Nexxt Child Bike seats. Features - Compatible with most 26" city and hybrid wheeled bikes - Supports up to 35Kg/77 lbs

A sturdy steel rack which allows for mounting Thule Yepp Maxi Easyfit and Thule Yepp Nexxt Child Bike seats. Features - Compatible with most 28"/700c city and hybrid wheeled bikes - Supports up to 35Kg/77 lbs

Extend the life of your Dummy bags with this replaceable wear patch.

You're lookin' at the Surly Big Dummy Bag Version 2.0. Just like the original, it's designed to work with Dummy-style rail systems found on cargo bikes like our Big Easy, Big Dummy, and Big Fat Dummy. We've made it easier to install, simpler to use, and refined its size and shape to better suit the stuff we haul most often. The sequel is slightly smaller, but you can still cram two full grocery bags in there on shopping day. Three if you like your potato chips pulverized. The Big Dummy Bag features an expandable cargo flap and side panels that can lie flat or cinch up to accommodate loads of varying dimensions. It also has two sizeable inner pockets with a dedicated divider so you can keep your legal documents tidy. It's furnished with adjustable daisy chains, straps, and buckles to help you secure bulky shit that may not fit otherwise, as well as three stainless steel drainage ports so you can hose it out after hauling your compost to the dump. Lastly, the bag's main body is tough 1680D nylon and its liner is 400D nylon. The material is also bluesign® Approved. So are the buckles and other hardware. This means the materials are sustainably produced to have the lowest possible impact on humanoids and our environment. - 22.5L capacity per bag

Surly's Dummy Deck provides a light, durable platform for cargo bikes, built to Xtracycle's Longtail standard — including the Big Dummy, of course. The Dummy Deck is stamped from 4mm-thick aluminum, chosen for its strength, durability, and recyclability, and it bolts directly to Surly Dummy Rails to stiffen and stabilize the whole system (it's also compatible with Xtracycle V-racks by using Xtracycle's SuperHooks). It features cut-outs for routing straps and cordage, a mounting hole for a rear light bracket, accessory-mounting holes, and countersunk holes for SuperHook hardware.

Surly's Dummy Rail Collars are nothing more than a simple clamping device that buttresses the connection between your Big Dummy Frame and the Dummy Rails. They increase the stiffness of the interface of these two parts and help keep your cargo from getting its salad tossed… unless of course your Dummy Bags are filled with tossed salad. These are designed specifically for use with the Big Dummy frame and Dummy rails, and will not work with Xtracycle rails. WARNING: Properly installed Dummy Rail Collars are required for carrying live cargo on your Big Dummy.

The Surly Dugout Bag is a great cargo solution for securely attaching compact items or bottles to your bike’s handlebar and frame. Engineered with one-handed operation in mind, interior cargo, and exterior pockets are easily accessible and made of bluesign® approved fabric and lining for best sustainable practices. The Dugout bag mounts onto any size frame with four connection points and carries up to three pounds of cargo or one 1-liter beverage. It also comes with a Surly Whip Lash Gear Strap for enhanced stability when riding rugged trails.  The Surly Dugout Bag is a great cargo solution for securely attaching compact items or bottles to your bike’s handlebar and frame. Engineered with one-handed operation in mind, interior cargo, and exterior pockets are easily accessible and made of bluesign® approved fabric and lining for best sustainable practices. The Dugout bag mounts onto any size frame with four connection points and carries up to three pounds of cargo or one 1-liter beverage. It also comes with a Surly Whip Lash Gear Strap for enhanced stability when riding rugged trails.  - Mounts using four connection points to provide stability on rougher trails  - Adjustable fit allows for compatibility on all bike frame sizes - Securely carries up to 3 lbs of cargo and up to 1-liter bottles  - Exterior pockets hold extra cargo space for snacks, tools, and more - Manufactured with bluesign® materials for lessened environmental impact  - Can be accessed with one hand for ease of use

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Dummy Rails support Dummy Bags on your Big Dummy cargo bike, and Surly's Dummy Deck bolts directly to them, stiffening the whole system for a more stable load. Dummy Rails are made of light, strong aluminum and were designed in conjunction with the Dummy Deck and Dummy Bags; each component works best when used with the others. Like all Surly products, they've built in lots of useful details. For example, the deck-attachment bosses stick up from the rails to create space between the deck and rails, providing windows to route tie-down straps and cordage; and threaded bottle cage bosses located at the rear of each rail provide mounting locations for accessories: bottle cages of course, or lights, cameras, pumps, flags, horns, light saber scabbards, disco balls, spittoons, cornucopias, etc. Dummy Rails will work with cargo frames (including the Surly Big Dummy) built around Xtracycle's longtail standards.

Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g

Surly Front Rack Hardware

Surly's Junk Straps are basically really long toe straps. They're 120cm woven nylon with a stainless steel buckle. Surly had them made to specification to ensure that they work well and last a long time. They're easy to use and they stay tight. Once you're ready, loosening them is quick and easy. They're light, pack small, and securely and conveniently attach all kinds of stuff to your rack, basket, handlebar, backpack, under your seat, around your thigh…just about anyplace. You can combine them for even longer straps. - Pack of 6

The Surly Little Dummy Bag is a 15L sling-style bag designed to work with your standard rear rack and help you carry grocery bags, fishing poles, and other oddly shaped ephemera. Unlike traditional panniers that clip on and off real fast, we wanted a cargo solution that you could leave mounted to your bike when you're off playing laser tag. The idea is you just throw your backpack or whatever in there, turn the cranks awhile, and then pull out your gear when you've arrived. Quite slick. You can still scatter schoolbooks and loose cans of tuna inside the Little Dummy if you want, but the bag-within-a-bag method makes unpacking quicker. Use the system of daisy chains and One-Wrap straps to secure baguettes, flutes, and other stuff that might stick out. Cinch the side straps to further stabilize your load. And for extra credit, use your favorite Surly Whip Lash or Junk Strap to make your setup work the way you want. There's also a small zippered compartment inside the bag, if you're into pockets. Oh, and we should also probably mention that the bag's 1680D nylon main body and 400D nylon liner are bluesign Approved. So are the buckles and other hardware. That means the materials are sustainably produced to have the lowest possible impact on humanoids and our environment. Compatible with most standard rear racks, the Surly Little Dummy Bag is a sling-style bag designed to help riders haul big awkward items more easily. Secure your backpack, groceries, or camping gear inside the sling when it's time to ride. When you've arrived at your destination, quickly grab your stuff and leave the Little Dummy Bag mounted to your bike. You're unstoppable now. - A system of daisy chains and One-Wrap straps can be used to secure large, odd-shaped items - Interior zipper pocket - 25-lb. bag capacity. Consult your rack's weight limitations - 15L total volume

The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else. - For general tie down use - 42" loop strap, plus 8" closure buckle strap

The Moloko Adjunct Personal Effects Receptacle is made from urethane-coated nylon canvas and designed to fit in the center of the Surly Moloko Bar. It has space for essentials and can easily be accessed while riding. - Constructed from urethane-coated nylon canvas to provide water-resistant protection - Elastic cord on top snuggly secures extraneous loose items like wrappers or gloves - Integrated light port allows a battery cord to pass through - Dimensions: 254 x 90 x 90mm

Designed to pair with the Surly 8-Pack Rack and similar porteur-style front racks, the Petite Porteur House Bag attaches easily via three adjustable straps. Featuring a refined pocket strategy, a classic roll top and structured body for added stability, and a bunch of webbing loops for attaching lights and lashing straps, there’s nothing petite about the possibilities here. - Includes two One-Wrap straps and one accessory bungee for securing loads of different shapes and sizes - Large main compartment, one large front pocket, and two smaller pockets in back - 25-lb. bag capacity. Consult your rack’s weight limitations - Dimensions when Rolled: 275 x 190 x 240mm - Dimensions when Unrolled: 275 x 190 x 400mm - Main body 1680D nylon, Liner 400D nylon. Bag fabric and hardware are bluesign Approved, which means the materials are sustainably produced to have the lowest possible impact on people and the environment - 11L volume Specifications: - Number of Compartments: 5 - Access Style: Roll Top - Primary Material: 1680D Nylon with polyurethane coating - Waterproof: No

Designed to fit the Surly 24-Pack Rack, Surly's updated Porteur House Bag features a versatile strap system that gets along with a variety of Porteur-style racks. Simple to install and remove, it's been tweaked to be even better for commuting and light weekend camping. With a structured body to stabilize your cargo, an integrated nylon liner, a handy roll top for accommodating bulky items, and more pockets than your old cargo pants, the Porteur House Bag makes unwieldy loads decidedly wieldier. - Includes two One-Wrap straps and one accessory bungee for securing loads of different shapes and sizes - One large main compartment, two front pockets, and two additional pockets on both sides of bag - 30-lb. bag capacity. Consult your rack's weight limitations - Dimensions when Rolled: 370 x 280 x 240mm - Dimensions when Unrolled: 370 x 280 x 440mm - Main body 1680D nylon, Liner 400D nylon. Bag fabric and hardware are bluesign Approved, which means the materials are sustainably produced to have the lowest possible impact on people and the environment - 18L volume Specifications: - Number of Compartments: 7 - Access Style: Roll Top - Primary Material: 1680D Nylon with polyurethane coating - Waterproof: No

All the hardware for the lower portion of your Surly rear rack. Stainless steel.

Dubbed 'Straggle-Check' frame bags, these bags are designed to fit both 700c and 650b Straggler and 700c Cross Check frames. Size up one size on your bag if you've got a 650b Straggler frame and voila, it fits. These are handmade by Revelate Designs in the U.S., made of Dimension Polyant VX 21 polyurethane coated fabric. It's durable, rip resistant, tightly woven and laminated to make it highly water resistant but not fully waterproof…. Revelate advises using stuff sacks inside (such as the one in which our bags are packaged) if you risk riding in extended downpours or underwater. Surly's Straggle-Check frame bags (as well as their mountain bags) are now using a ladder strap system, which allows greater flexibility in how you attach the bag to your frame. The ladder straps let you customize the fit and placement of the mounting straps so if you have some weird contraption clamped to your frame tubes like a chain keeper, cable pulley, or some trinket grandma gave you, it won't interfere with the mounting straps on the frame bag. They're also including foam bumpers for the mounting straps to minimize thread abrasion to the bag and attachment points Quality YKK brand water resistant zippers – with an improved, water resistant zipper 'garage' – control compartment access and help keep the weather out. Zippers are sewn with a stretch panel to relieve stress on the zipper as well. Stress even kills zippers. The large main compartment has a flexible divider inside, and there's a hydration port to make sure your whistle stays wet. There's also a compartment suitable for smaller items you'll access relatively often, like your map, phone, hard boiled eggs, uncontained pudding, marbles for playing marbles, your dugout, that ring you found that makes you disappear when you put it on, or whathaveyou. Frame bags such as this are light and reasonably voluminous. They are stable because they center weight low between your wheels and body, and they go places where racks and panniers are often troublesome, like singletrack. Note: due to the rough texture of the mounting straps, prolonged use may lead to scratched or worn paint. If you're worried about keeping everything looking pristine you probably ought to look for some other type of bag, or figure a way to protect the paint, such as duct tape, or tatting a top tube doily - for example.

We designed the Surly TV Tray to help riders boost the capacity of their current rack setups. Designed for easy pairing with nearly all Surly racks and most other racks on the market, mount this sturdy aluminum platform on top of your current rack to provide a footprint large enough for 30 lbs. of beef jerky, 9-volt batteries, used pinball parts, or whatever else you might need to haul. Available in dark black. - Load weight limit 30 lbs. - 15-3/8 x 10-inches - Rack weight 650g - 6061-TB Aluminum - Not compatible with Surly 24-Pack Rack or Wide Rear Disc Rack - Mounting Hardware Included

Suitable as a tourniquet or stylish headband in a pinch, the Whip Lash's primary function is to help you attach whatever needs attaching to your bicycle frame. Available in a multi-pack that includes two 550mm lashes and one 695mm lash, the Whip Lash's potential is limited only by your imagination. You could use one to strap your beverage to the down tube when the trail says you ought to keep your hands on the bars. Or you could use another to fix your fishing gear to the top tube when rack space is maxed out. Whatever you get into on or off the bike, they're handy to have around because they're light, compact, and easy to use. Rubberized on one side to keep your stuff from slipping around, the Whip Lash's trimmable design features nylon construction and a simple hook-and-loop style closure.

Similar to the original MATTONE, a high friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the MATTONE will remain 'high and tight' under your saddle until you need to access it... no swinging, swaying, or rattling... ever

Named after the Italian word for Brick, Mattone is a water-resistant, ultra-compact seat bag that attaches to the rails using the BOA Closure System.  Unique zipper design allows it to be accessed while on the bike, or to open like a book when removed from the bike for easy access. Mattone is for the cyclist looking to carry a spare tube, CO2, multi-tool, and some cash in a discreet, water-resistant package. Internal divider holds ID, credit card, or cash while also protecting your tube from your multi-tool! Seat bag users fall into two categories: Seat Roll aficionados and seat bag users. Traditionally, seat bags have been simple open spaces that allowed content to jangle about, making noise and rubbing against each other. Often times a spare tube was pulled out of a seat bag to reveal it was more full of holes than the tube being replaced due to friction against a house key or multi-tool. With Mattone, we designed a layout similar to a book, where the bag can fully open to hold the tube and CO2 cartridge on one side, separated by a padded ballistic nylon 'page' separating it from the other side where you can store an inflator head, multi-tool, contact lens case, etc. The 'page' also contains a slot for a credit card, ID, money, or house key. The unique off-center Aquaguard Zipper allows the case to completely open and lay flat when off the bike, while also allowing easy access to the multi-tool and money/card slots when on the bike without risk of spilling all the contents of the bag. A high-friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the Mattone will remain 'high and tight' under your saddle until you need to access it...no swinging, swaying, or rattling...ever. - Exterior—Sleek black finish with reflective graphics - Interior—Hi-contrast red material with separate ID, credit card, or money flap - Interior Volume—Holds one inner tube, one CO2 cartridge, one tire lever (all of these components are sold separately and are not included) - BOA Closure System with open guide release on Hypalon retaining strap - YKK Aquaguard zipper - Outside Dimensions: 13cm x 8.5cm x 5.5cm - Volume: Approximately .61 L - Strap Measurements: 27cm x 4.5cm

Seat Capsule Premio is our BOA-powered saddlebag option for those that prefer more structure and internal volume than what a seat roll has to offer. A high-strength thermoformed shell creates a modular structure with two internal dividers that help keep everything organized. The capsule is secured to the bike using the BOA Closure System, and features a Rail Guard for superior grip and protection of the saddle rails. The zipper is a YKK locking model that bisects the lower third of the bag. Our designer chose this low position to make it easier to access the bag while it's still attached to the saddle; a key difference between a seat bag and a seat roll. - High strength Thermoformed shell - Boa Closure System with Guide - Rail Guard protects and grips saddle rails - YKK Locking Zipper - NO Velcro to damage your seat post or inner short legs - 625cc Internal Volume

Seat Roll Asymmetrico takes everything we've learned in 5 years of producing the award-winning Seat Roll Premio and kicks it up a notch with lighter materials, reduced bulk, improved abrasion resistance, an extra pocket, and a unique asymmetric design which allows you to pack more into a smaller volume, oh, and room for up to 700x45 (29x1.75") tubes! - 2-Ply Ballistic Nylon Construction with Hypalon outer jacket - Boa L6 Closure System with Lace Guide - Padded Rail Guard protects saddle rails and speeds Installation - FOUR internal pockets: Holds tubes up to 700x45mm - Black reflective printing provide stealthy HI-VIS in low-light conditions - Weight: 85 grams

The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.

Designed with minimalist riding in mind, the Anything Bracket mounts to standard or Three-Pack frame bosses and works directly with the Anything Pack, allowing you to carry essential items on the bike. - Combines placement of the Anything Pack and standard water bottle cage in a single location - Mounts to standard or Three-Pack bosses on forks and frames - Bracket is constructed of lightweight 6061-T6 aluminum - Includes Anything Pack, mounting hardware and strap - Anything Pack features a roll-top closure for easy access

The Down Under HD Rack is the recommended lowrider for world touring. Sturdy and dependable, the steel construction lends itself well to field repairs should a worst-case scenario occur. - Requires dual-sided, mid-blade mounts - Wide crossbars provide sturdy, secure attachment points for a pannier - Tubular 4130 CroMoly construction - Mounting system provides 35mm range of infinite adjustment to position the rack - Includes mounting hardware kit - Powdercoat finish - Maximum Recommended Load: 55lbs (25kg) - Sold in pairs - Requires inner and outer mid-blade eyelets

The Salsa EXP Series 35.0 Anything Cradle Arms are for mounting the Salsa EXP Series Anything Cradle (sold separately) to handlebars with a 35.0mm or 31.8mm clamp diameter. - Compatible with 35.0mm bars or 31.8mm bars (with included shims) - Compatible with all Salsa EXP Series Anything Cradles - Hinged clamps allow for easy installation and removal from handlebars - Made of 6061 forged aluminum

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed for use with our EXP Series Side-Load or Top-Load Dry Bags, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly, which is essential to any well-balanced bikepacking setup. - Includes Anything Cradle and two 30" Salsa EXP Series Rubber Straps - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed around our EXP Series Side-Load Dry Bag, which maintains a fixed height for loading with ease, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly—an essential part of any well-balanced bikepacking setup. - Kit includes Anything Cradle, Side-Load Dry Bag, EXP Series Front Pouch, and two 30" Salsa EXP Series Rubber Straps - EXP Series Anything Cradle Side-Load Dry Bag is fixed-height for easy loading - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Works with or without EXP Series Anything Cradle Front Pouch - Anything Cradle Dry Bags feature a welded seam construction with waterproof materials and hook-and-loop straps for easier installation - Anything Cradle Front Pouch uses water-resistant fabric with welded seams for weather protection - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

The EXP Series Frame pack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. This frame pack is designed to fit the Cutthroat frame perfectly. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - D-ring to keep water bladder from compressing itself in the bottom of the bag - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - 500D Nylon with TPU lamination and PU coating, 1000D Polyester with dual sided TPU lamination, #10 waterproof YKK Zippers, Duraflex Hardware - XL Weight: 360g; Volume: 6.1L - L Weight: 320g; Volume: 5.2L - M Weight: 300g; Volume: 4.5L - S Weight: 260g; Volume: 3.5L

The EXP Series Fat Framepack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - Tapered at the front and along the bottom for maximum carrying capacity - Designed to fit: Mukluk Aluminum, Mukluk Carbon, Blackborow, and Blackborow V2

The Salsa EXP Series Anything Cradle Front Pouch makes it easy to access the gear you rely on throughout the day on a bikepacking adventure. This pouch features fully welded construction for day-in, day-out use, and a buckle attachment design that fully integrates with our EXP Series Anything Cradle and EXP Series Dry Bag. - Keeps your ride essentials in easy reach - Designed for use with our EXP Series Anything Cradle and EXP Series Dry Bag system - Extremely weather-resistant welded design

The EXP Series Full Suspension Framepacks create storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. They’re built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. These framepacks are designed to fit specific Salsa suspension frames perfectly. Check the EXP Framepack Sizing Chart for fit information. - Single compartment for larger items with driveside opening - Sewn-in zipper for long-lasting durability and easy-to-use loop zipper closure - Built with materials to help maintain the pack shape and to prevent billowing - Waterproof fabrics and water-resistant construction - Padded in key areas to protect contents - NOTE: Designed for the V3 (2019) Spearfish and Horsethief. This bag does not fit previous generation Spearfish and Horsethief models.

The EXP Series Full Suspension Framepacks create storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. They’re built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. These framepacks are designed to fit specific Salsa suspension frames perfectly. Check the EXP Framepack Sizing Chart for fit information. - Single compartment for larger items with driveside opening - Sewn-in zipper for long-lasting durability and easy-to-use loop zipper closure - Built with materials to help maintain the pack shape and to prevent billowing - Waterproof fabrics and water-resistant construction - Padded in key areas to protect contents - NOTE: Designed for the V3 (2019) Spearfish and Horsethief. This bag does not fit previous generation Spearfish and Horsethief models.

The EXP Series Full Suspension Framepacks create storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. They’re built with extremely durable fabric and zippers, and the result will see you through many miles and many adventures. These framepacks are designed to fit specific Salsa suspension frames perfectly. Check the EXP Framepack Sizing Chart for fit information. - Single compartment for larger items with driveside opening - Sewn-in zipper for long-lasting durability and easy-to-use loop zipper closure - Built with materials to help maintain the pack shape and to prevent billowing - Waterproof fabrics and water-resistant construction - Padded in key areas to protect contents - NOTE: Designed for the V3 (2019) Spearfish and Horsethief. This bag does not fit previous generation Spearfish and Horsethief models.

The EXP Series Framepack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - Tapered at the front and along the bottom for maximum carrying capacity - Fits Woodsmoke, Timberjack, and Fargo bikes

The Salsa EXP Series Rubber Strap is a strong, adjustable strap that holds your gear securely to Salsa Anything Cages, Anything Cradles, or racks. Use them anywhere you need to secure a load on your bike. - UV- and weather-resistant - Includes band to keep excess strap out of the way - 22" length is best for use with Salsa Anything Cage and Anything Cage HD - 30" length is best for use with Salsa Anything Cradle - Sold in pairs

The Timberjack Kids Framepack is the ultimate place for your young adventure junkie to stash their stuff. Whether filled with gear or treasures—this pack is the perfect compliment to every young heart’s desire to explore. - Constructed of rugged 600D PU coated Poly fabric, with Velcro strap attachments for a secure fit - Non-zipper bag opening uses Velcro closure with glove-friendly tab for easy access - Designed specifically to fit the Salsa Timberjack 20 kids bikes

The Timberjack Kids Framepack is the ultimate place for your young adventure junkie to stash their stuff. Whether filled with gear or treasures, this pack is the perfect compliment to every young heart’s desire to explore. - Constructed of rugged 600D PU coated Poly fabric, with Velcro strap attachments for a secure fit - Non-zipper bag opening uses Velcro closure with glove-friendly tab for easy access - Designed specifically to fit the Salsa Timberjack 24 kids bikes

This carbon Mukluk specific frame bag incorporates the best features of our classic Ranger frame bag. This frame bag is for the 2017-2021 year models of the Salsa carbon Mukluk. Your frame size correlates to the frame bag size; a small fits a small carbon Mukluk. If you have an aluminum Mukluk, we recommend the Ranger. Features: - Revelate exclusive RevX-PAC panels that are 2 times as abrasion resistant as standard VX material. - Zipstretch construction pairs a bomber, wetsuit style molded-tooth zipper with our exclusive stretch Cordura panels that reduce zipper stress when closing bag. - Industry leading #10 Molded tooth zippers with urethane coated tape are basically impervious to dirt and grit that destroy more commonly used water resistant coil zippers. - Exit port in main compartment for hydration tube or wires. - Zippered left side pocket on sizes SM-XL. - Bags feature one main compartment with vertical divider. - Expanding taper front section for increased volume at head tube. - Stretch mesh internal pocket. - Front top tube attachments accommodate top tube packs. Weight: - SM: 11 oz - MD: 12 oz - LG: 13 oz - XL: 15 oz Materials: - RevX-Pac Fabric: Dimension Polyant VX-21 with proprietary abrasion resistant finish; 1050 denier domestic ballistics nylon; 420 denier diamond ripstop lining; closed cell foam padded tube sections. Made in the USA with domestic and imported materials. These frame bags are manufactured and distributed by Revelate Designs and have no affiliation with Salsa Cycles. Salsa Cycles is a trademark of Quality Bicycle Products.

We set out to create the most stable, low profile mounted, feature loaded, waterproof seat bag available. The Spinelock seat bag checks all the boxes. The Spinelock integrates user tested and approved features like a one-way air purge valve, rear light slots, loop and bungee deck, and an external plastic bottom with a new patented attachment system. Stability was the driving element in the design process. If you want something you can pack and forget, the Spinelock is your seat bag. There are two size options, neither of which sacrifice features for capacity. The smaller but largely versatile Spinelock 10L maximizes your carry with minimal tire clearance and provides a generous amount of waterproof storage with additional space on the external corded deck. . If you are going on a long expedition or carrying cold weather gear we recommend checking out the Spinelock 16L. How it works: - The Spinelock stability system consists of three components: the saddle clamp, seat bag mounted "Spine" baseplate, and pin. - A low profile, high strength, forged aluminum clamp works in combination with precision IGUS bushings to form the pin interface. Twin forged upper arms, fastened by Torx-25 bolts, rotate into position above the saddle rails for easy mounting. - Resembling a spine ramp familiar to skateboarders, the "Spine" baseplate is made of an impact resistant UV-stabilized nylon and is integrated to the seat bag surface. The plate features two mounting positions to accommodate seatpost setback and saddle adjustments. To connect the bag, you simply line up your selected mounting position to the seat mounted clamp and slide the pin through the aligned holes. Attaching the side compression straps to the wings of the clamp fixes the pin in place and you're ready to ride!

Designed to fit the M and H style Brompton handlebars, the 1.2 Litre City Bar Bag is made from tough fabrics and is tape sealed - making it completely waterproof. Perfect for carrying keys, phone, and wallet. Handmade in our Yorkshire workshop, all bags are finished with the classic Restrap label, made from vegan-friendly PU. Weight - 90g Capacity - 1.2L - Bags designed specifically for use on folding bicycles - 100% handmade in Yorkshire England from vegan-friendly PU - Third-party online sales are strictly prohibited by the manufacturer All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.

The City Saddle bag is designed for any folding bicycle. Constructed from waterproof fabrics, it comes in two sizes to accommodate a range of gear like clothing, off-the-bike footwear, or tools. Both sizes are tape-sealed and completely waterproof. The bag also features an extendable bottom stabilising strap which fits easily around the suspension block on all Brompton bicycles. Handmade in our Yorkshire workshop, all bags are finished with the classic Restrap label, made from vegan-friendly PU. Weight - 110g Capacity - 1.2L - Bags designed specifically for use on folding bicycles - 100% handmade in Yorkshire England from vegan-friendly PU - Third-party online sales are strictly prohibited by the manufacturer All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.

The 1 Litre City Stem Bag fits any folding bicycle. Made from tough waterproof fabrics, it provides a simple solution for carrying a water bottle, snacks, or other accessories. The bag moves with the stem and does not impact the folding mechanism of the bike. Handmade in our Yorkshire workshop, all bags are finished with the classic Restrap label, and made from vegan-friendly PU. Weight - 96g Capacity - 1L - Bags designed specifically for use on folding bicycles - 100% handmade in Yorkshire England from vegan-friendly PU - Third-party online sales are strictly prohibited by the manufacturer All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.

The Restrap Full Frame Bag allows you to easily increase the load out you carry for comfortable bikepacking and touring. The bags come in three sizes, designed to fit most standard frames and geometries. Two Aquaguard YKK zips on the drive side of the bag allow easy access to the top and bottom sections of the bag, with internal velcro dividers to separate the compartments. These dividers aid the structure of the bag when fully packed, but also fold away to allow use of the full internal space of the bag if needed. The non-drive-side of the bag contains a document pocket, useful for storing smaller items. The bag is made from durable, textured nylon outer and VX21 fabrics, with a wipeable lower section that means the bag is easy to keep clean when riding off-road or in adverse weather. Rubberized strapping provides extra grip to the frame and webbing straps, with easy-to-use cam locking buckles, keep the bag sitting securely and free of movement while riding. Handmade in our Yorkshire workshop, all bags are finished with the classic Restrap label, made from vegan-friendly PU. Weight - 275g / 322g / 368g (small/medium/large) Capacity - 6L / 7.5L / 9L (small/medium/large) - Body is made out of 1000D Textured Nylon & VX21 fabrics - 100% handmade in Yorkshire, England - Third-party online sales are strictly prohibited by the manufacturer All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.