Skip to main content


WINTER SERVICE SPECIALS
(thru Feb. 28): BASIC Tune: $85 – regularly $100 | DELUXE Tune: $130 – regularly $180 | OVERHAUL: $250 – regularly $300

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Packs/Racks/Baskets

Nitto Campee 650B Rear Rack CrMo
Nitto's quality shines through every aspect of this rack. From the design to the gorgeous stainless hardware, no detail is overlooked. - Tubular cro-moly construction - Stainless steel hardware included - Mounts to brake studs via tubular struts. Note that the 650b version has only the lower set of mounting hardware, not the upper strut mounts. - Satin nickel plated - Detachable pannier supports
Jandd Reflector Mount
$4.00
The Jandd Reflector Mount allows riders to attach a reflector to a rack.
Surly Dummy Bag D-Ring and Velcro Strap
$5.00
Spruce-up a well-loved Dummy bag with replacement parts from Surly.
Surly Dummy Bag Lower Tensioning Strap
$5.00
Spruce-up a well-loved Dummy bag with replacement parts from Surly.
Surly Dummy Bag Snap Hook Strap Assembly
$5.00
Spruce-up a well-loved Dummy bag with replacement parts from Surly.
Brooks Reflective Patch
$5.50
Hypalon reflective patch that can be attached to any Brooks bag.
Surly Dummy Bag Mitten Hook/Shock Cord
$5.50
Spruce-up a well-loved Dummy bag with replacement parts from Surly.
Planet Bike Shiner Helmet & Rack Mount
$5.99
Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks
Ortlieb Inserts for QL2.1 Top Hooks
$6.00
If you've worn out your plastic inserts on the top hooks of your QL2.1-equipped Ortlieb bag, good job! That means you're using your gear a lot. To freshen up that sweet mounting system, here are new inserts for three different rack tube diameters. Each set has 2 inserts to fit each of: 8mm, 10mm, and 12mm racks rails. Each set is enough to set up one Ortlieb pannier for any of these diameters.
Wald Wald 5237 Basket Fitting Kit
$6.00
Replacement hardware, bolts and nuts for Wald baskets. Works with Wald Basket models: 520, 520GB, 535 and 535GB
Topeak Cargo Net for Trolley Tote & MTX Rear Basket
$7.99
Topeak's Cargo Net works with the Trolley Tote or MTX Rear Basket (sold separately). Make sure your goods stay in place on those bumpy rides home!
Dimension Seatstay Rack Clamps
$8.00
Dimension Bicycle Mounted Rack Parts - Sold as a pair - For 14mm-16mm seat stays - Nuts and bolts included - Plastic coated for secure attachment to frames without braze-ons
Ortlieb Shoulder Strap W/Snap Hook
$8.00
Shoulder strap 150cm with snap hook for Back-Roller/Front-Roller City, Bike-Packer, Sport-Packer from '09
Wolf Tooth Components B-RAD Dogbone Base
$9.95
The B-RAD Dogbone allows for the bottle cage to mounted off center with additional B-RAD accessories, without needing the B-RAD base. Most commonly used for smaller, curved or dual suspension frames where the slotted bases won't fit or are not needed.
Axiom Elastic Cargo Net
$9.99
Axiom's Elastic Cargo Net keeps your cargo in place. Its 6-hook design and shock cord construction make it a flexible fit for most every rack and basket. Designed for baskets and racks, this durable shock-cord net holds cargo securely in place while sturdy hooks ensure years of reliable performance. - Durable elastic shock cord. - Anti-rust steel hooks. Features Fits most baskets. Can be used on rack platforms to hold odd shaped items, like soccer balls, or backpacks.
Delta Elasto Net
$9.99
A stretch web net that helps secure items to a rear rack. - Four nylon molded hooks for rack attachment - Fits any rack - Dimensions: 11 x 11" - Custom-molded silicone - Stretches to three times its size
Salsa EXP Series Direct Mount Thumb Screw
$9.99
The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two
Jandd Disc Brake/Fender Adaptors
$10.00
These handy adapters are for mounting a rack on bikes where clearance is needed for disc brake calipers or other accessories. - Screw them into the same holes on the dropouts for rack or fender bolts - Made from special hardened aluminum stock with a threaded steel insert - Best when only torqued to the same degree as rack bolts - Pegs are about .75" long - Can be used single sided or double sided - Sold in Pairs
Ortlieb Roller Pannier Shoulder Strap
$10.00
Shoulder strap 80 cm, 25 mm with male and female buckles "Stealth model" for Back-Roller and Front-Roller from '99 on.
Surly Loop Junk Strap
$10.00
The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else. - For general tie down use - 42" loop strap, plus 8" closure buckle strap
Jandd Mono-Stay Rack Adaptor
$10.95
Jandd Mono-Stay Rack Adaptor is used for bikes that have a wishbone-style configuration on the rear end.
Axiom Trekk Seat Collar - 29.8
$10.99
Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum
Axiom Trekk Seat Collar - 34.9
$11.00
Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum
Surly Big Dummy Bag Brake Caliper Wear Patch
$11.00
Extend the life of your Dummy bags with this replaceable wear patch.
Jandd Bungee Rack Strap
$11.95
Jandd's Rack Bungee is made with flat braided elastic for better load control. - Each strap is made up of 2 lengths of bungee so that the load is held front and back with 1 strap
Topeak Mounting Bracket Arm
$11.95
For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.
Axiom Trekk Seat Collar - 31.8
$12.00
Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum
Problem Solvers Seatpost Clamp with Rack Mounts
$12.00
The Problem Solvers Seatpost Clamp with Rack Mounts is an ingenious adapter that gives you a super-secure and clean way to mount a rear rack on your bicycle. This light and durable aluminum piece simply takes the place of your seat tube collar. It includes a stainless-steel binder bolt and 2 5mm screws for rack attachment.
Surly Tool Bag
$12.00
Tire lever. Multi-tool. Bottle opener. Pointer finger (you can re-attach that later). Beer money. Our tool bag has abundant room for all the essentials. And if you're worried about your stuff getting wet, don't be. 420d matte PVC-coated nylon and Velcro'll keep it dry. Isn't science great? - 7.5 inches wide - 6.5 inches tall
Surly Front Rack Plate Kit
$12.50 - $25.00
Surly Front Rack Hardware
Page 1 of 10 Next page