Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Fenders

Planet Bike Fender Stay Eyebolt, Nut & Rubber Cap
$3.00
Holds stainless steel stay rods to fender Contains: - (1) Eyelet bolt - (1) 10mm lock nut - (1) Rubber cap Compatibility: - All Hardcore, SpeedEZ, Cascadia, Cascadia ALX, & Grasshopper fenders
Planet Bike Hardcore Fender Hardware Kit (45mm)
$4.00
Compatible with: - Hardcore bike fenders - 700c x 45mm - Full bike fenders - 700c x 45mm - SpeedEZ bike fenders - 700c x 45mm - Hardcore Recumbent bike fender - 700c rear - Contains 45mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers
Planet Bike Front Fender Release Tabs
$6.99
- Releases front fender stays if debris is present in between fender and tire - Fits current and past Grasshopper, Cascadia ALX, Cascadia and Hardcore front fenders (not recommended for non-Planet Bike fenders)
SKS U-Stay Kit for Velo 65 Fenders
$9.99
Addd an extra dose of stability to SKS's Velo 65 fenders. A stainless steel U-stay mounts to the fenders and your frame eyelets to eliminate rattling and bouncing fenders.
Portland Design Works Origami Clip-On Front Fender
$16.00
Just the thing for rainy weather, the Portland Design Works minimalist Origami Front Fender attaches to a snap-on/off bracket you mount on your downtube. And it folds flat so you can easily stow it when not in use. - Length: 370mm (14.5") - Weight: 60g (2.1oz)
SKS X-Tra Dry
$17.99 - $20.00
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.
Axiom Axle Runner (Set Of 4)
$18.00
An innovative adapter that adds eyelets to any QR-equipped bike, facilitating the mounting of traditional fenders to bicycles lacking front and rear eyelets. CONSTRUCTION • Lightweight red anodized aluminum MOUNTING SYSTEM • Mount to quick release skewer ADDED BENEFIT • A quick and easy solution to make fenders fit • Set of four
Planet Bike Clip-On Fenders (ATB)
$20.00
You only need a couple of seconds to protect yourself and your bike from wet weather. Planet Bike's Clip-On Fenders are made of a durable all-weather polymer so never again will you come back from a ride with a dirt streak up your back. And, because they're clip-ons, you can easily remove the fenders when it's dry.
Problem Solvers Fender Flute
$20.00
The Fender Flute fits inside most forks and attaches to standard front fender tabs for mounting fenders closer to the wheel. - Especially helpful for fender mounting on suspension-corrected forks - Threaded M6 holes at 10mm intervals for fine-tuning fit - Bolts and lock washers included
Portland Design Works Origami Clip-On Rear Fender
$21.00
Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use. - Length: 445mm (7.5") - Weight: 160g (5.6oz)
SKS X-Tra Dry XL
$22.00
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it's longer and fatter than the regular X-tra Dry so it works great with 29ers and fatter 700c tires. It's also a breeze to attach with its easy-to-adjust seatpost mounting strap.
Axiom Roadrunner LX Reflex Trekk Fenders
$35.00
Axiom's Roadrunner LX Reflex Fenders are made of super-durable Techniflex plastic that resists breakage even in sub-freezing conditions. Their mud flaps keep you clean and the gray by day, reflective by night 3M Reflex strips keep you safe. And, they also feature sturdy, easy-to-install stainless steel stays.
Berthoud Stainless Steel Fenders
$40.00 - $75.00
Berthoud fenders are beautiful and as durable as anything out there. They don't come pre-drilled, so you'll need to drill holes to bolt the fenders to the seatstay and chainstay bridges. If your bike doesn't have fender mounts in those locations, you'll want to use zip ties to complete the installation.
Planet Bike Cascadia ALX 26-inch Recumbent Bike Fender
$50.00
If you ride bent, Planet Bike's recumbent fenders keep you covered when Mother Nature rains on your ride. They are designed for non-tradtional bike and trike setups. Their clean lines and rugged aluminum construction provide great protection from rain, road grit, and other tire spray. - 6061 aluminum blades - 150mm mudflaps for extra coverage - Adjustable stainless steel stays create a secure fit on any style recumbent - Eyelets Required?: Yes - Release Tabs on front fender for added safety - Wheel size: 26” - Max tire size: 26" x 1.5"(50mm) / 26" x 1.9"(60mm)
Planet Bike SpeedEZ Fenders (Road)
$50.00
Planet Bike's SpeedEZ Fenders keep you dry in wet weather and are easily removed when the sun comes out. Made from nearly indestructible Superflex polycarbonate and rustproof stainless-steel stays, these fenders also utilize a clever, pre-installed attachment system so you can mount and remove them in seconds.
Planet Bike SpeedEZ Fenders (ATB)
$55.00
Planet Bike's SpeedEZ Fenders keep you dry in wet weather and are easily removed when the sun comes out. Made from nearly indestructible Superflex polycarbonate and rustproof stainless-steel stays, these fenders will provide years of use. With their pre-installed mounting hardware you can install and remove them in seconds.
Planet Bike SpeedEZ Fenders (Hybrid/Touring)
$55.00
Planet Bike's SpeedEZ Fenders keep you dry in wet weather and are easily removed when the sun comes out. Made from nearly indestructible Superflex polycarbonate and rustproof stainless-steel stays, these fenders also utilize a clever, pre-installed attachment system so you can mount and remove them in seconds.
Handsome Cycles Mud Butler Fender Set
$65.00 - $70.00
-Traditional hammered appearance with modern technical elements -Full coverage front and rear fenders with a PVC-coated rear bridge securely holds the fenders and does not rattle. -Pre-drilled for easy installation -Hardware with leather washers included, offering a quiet ride -Sizing: The 35mm width fits up to 28mm tires; the 45mm fits up to 38mm tires. Notes: 1. Depending on your bike frame, it may be necessary to trim the fenders in specific places. 2. We don't accept returns on fenders that have been trimmed or otherwise altered. In short, be sure these fenders will fit your bike and tires.
Planet Bike Cascadia Fenders (ATB)
$66.00
Turn your mountain bike into an all-weather vehicle with Planet Bike's Cascadia Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
Planet Bike Cascadia Fenders (Hybrid/Touring)
$66.00
Turn your bike into an all-weather vehicle with Planet Bike's Cascadia Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
Planet Bike Cascadia Fenders (Road)
$66.00
Turn your bike into an all-weather vehicle with Planet Bike's Cascadia Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
Velo Orange Stainless Steel Fenders
$90.00
These classic smooth-profile aluminum fenders are priced like plastic fenders. This model fits 26" wheels on touring and mountain bikes. The hardware includes: 5mm polished aluminum stays, R-clips and screws, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, and leather washers. The front fenders are 80cm long and the rear are 110cm for very good coverage and spray protection. They are pre-drilled. For tires up to 50mm wide. Yes, the stays and hardware are included. Sold as a pair.
Planet Bike Cascadia ALX Fenders
$95.00
- Rugged 6061 aluminum construction is corrosion resistant - 100mm mudflaps provide ultimate coverage and are double-riveted for durability - Hardware is all stainless-steel and pre-installed for hassle-free mounting - V-stays for added stability - Disc brake compatible - 50mm width - Release Tabs on front fender for added safety - Meets EN test standards
Portland Design Works Full Metal Fenders (road width)
$120.00
PDW's Full Metal Road Fenders are designed to fit road bikes that are difficult to install full-coverage fenders on. They have special hardware to get around caliper brakes and under forks, even add-on mounts for bikes that lack eyelets to mount fender stays to. They provide full-wrap coverage, even shielding riders behind you from tire spray thanks to the sturdy rubber mudflaps. Plus, safety release tabs ensure your wheels keep turning, even if debris gets lodged between the fender and tire. • Anodized aluminum • 30mm wide • Fits bikes with 700 x 23mm tires and fender eyelets • 454 grams
Portland Design Works Full Metal 700C Fenders
$130.00
PDW's Full Metal Road Fenders are designed to fit road bikes that are difficult to install full-coverage fenders on. They have special hardware to get around caliper brakes and under forks, even add-on mounts for bikes that lack eyelets to mount fender stays to. They provide full-wrap coverage, even shielding riders behind you from tire spray thanks to the sturdy rubber mudflaps. Plus, safety release tabs ensure your wheels keep turning, even if debris gets lodged between the fender and tire. - Anodized aluminum - 30mm wide - Fits bikes with 700 x 23mm tires and fender eyelets - 454 grams
Portland Design Works Full Metal City Fenders
$130.00
Made of anodized aluminum and adorned with laser graphics and an embossed alloy head badge, PDW's Full Metal City Fenders are a beautiful complement to any bike. They provide full-wrap coverage, even shielding riders behind you from tire spray thanks to the sturdy rubber mudflaps. The Full Metal Fenders feature safety release tabs to ensure your wheels keep turning, even if debris gets lodged between the fender and tire. • 45mm wide • Fits bikes with 700 x 28-32mm tires and fender eyelets • 510 grams
Portland Design Works Full Metal 650 Beast fenders
$140.00
The Portland Design Works Full Metal Fenders have been our best-selling premium fender set since they first appeared a few years ago. They're expensive and worth it. 55 mm wide and will fit 650bx46mm tires maximum Weight: 454 g (16 oz) Lifetime PDWarranty Here's what PDW has to say: Introducing a brand new size in our classic, ever-popular Full Metal Fender design. Made of sturdy anodized aluminum and adorned with laser graphics and an embossed alloy head badge, the 650 Beast Fenders are a beautiful complement to any bike with 650b sized wheels. The 650 Beast Fenders will fit close clearance bikes with 650x46mm tires maximum. They come with special extra long hangers designed to better fit 650b frames and forks. The double rear stays add stability and prevent rattling. They provide full-wrap coverage, even shielding your shoes and riders on your rear wheel thanks to sturdy rubber mudflaps. Safety release tabs ensure your wheels keep turning even if debris gets lodged between the fender and tire. The 650 Beast easily mounts to bikes with eyelets using all stainless steel hardware which may be replaced as needed.
Page 1 of 1