Searching...
Joe Bike Portland Oregon

Portland's full-service bike shop for high-performance urban and touring bikes

Location: 2039 SE Cesar E Chavez Blvd Portland, OR 97214 Phone Number: 503.954.2039 Hours: Mon - Fri: 9:00am - 6:00pm Sat, Sun: 10:00am - 6:00pm
 
 
 
 
 
 
 
> Bicycling Catalog > Parts > Handlebars > Drop > Jones > H-Bar Loop handlebars
 
Jones H-Bar Loop handlebars

Jones H-Bar Loop handlebars

Product Rating
 
0.0 stars
 (0 Reviews)
$120.00 - $295.00
Availability: Please select options
 

Product Details

Jones H-Bar Loop handlebars

The Loop H-Bar has the same hand, stem and brake lever position as the original H-Bar but the cross bar sweeps forward to allow the levers to go behind the cross bar instead of in front. This gives longer uninterrupted hand positions and will allow trigger and grip/twist shifters to fit on the rearward extensions (unlike the original H-Bar and the Cut H-Bar). The continuous front loop of the bar enhances stiffness and is good for additional aero hand positions and mounting lights, GPS devices etc. This bar provides comfort and power with an impressive weight. With the levers in the optimum position the rider is superbly placed for fast riding while still enjoying all the hand positions available. The rearward extensions allow extra leverage and a wider hand position - be it for comfort or power. All H-bars are for a 31.8 stem and the cross tube is now tapered and butted with a 31.8 mm clamp area. The grip tubes on the aluminum version are also butted for strength, and weight savings.

A common question about the Loop H-bars is whether they work with barend shifters. The short answer is yes, but we don't like to put them in the ends of the bars for a couple of reasons: putting the shifters in the ends of the bars it puts them in a position where they are likely to hit parked cars or trees, as well as moving them farther from the other controls and the main hand positions. Finally, the grips would need to be modified significantly to accept the cable housing, or the bars would need to be wrapped with bartape, which won't give you quite as much padding as the ESI grips that we have made for the bars. When we use barend shifters, we mount them on the Paul Thumbies, which have hinged clamps that allow you to mount the shifters in front of the crossbar. They work great!
Great for; Mountain bikes and road bikes, Fat Bikes, Touring, Bikepacking Adventures, Singlespeeds, City Riding and more!
Compatible with; Trigger shifters, Gripshift, Shimano twist shifters, Rohloff, (hinged) thumb-shifters and Singlespeeds.

 
  • Part Numbers close open

    Option Manufacturer's Part Number Store SKU
    Black / 660 mm / Alloy jonesloopblack660 22901
    Black / 660 mm / Carbon jonesloopblack660carbon
    Black / 710 mm / Alloy jonesloopblack710 22902
    Black / 710 mm / Carbon jonesloopblack710carbon 23550
    Silver / 660 mm / Alloy jonesloopsilver660
    Silver / 660 mm / Carbon jonesloopsilver660carbon
    Silver / 710 mm / Alloy joneslloopsilver710
    Silver / 710 mm / Carbon jonesloopsilver710carbon
    Back to top