The Mission One is a mountain bike that could not have existed just a couple years ago: a so-called "entry level" all-mountain bike that's as capable and tough as bikes that cost thousands of dollars more. As Diamondback's KnuckleBox suspension design has evolved, the bikes that use it have become better—at every level. The Mission One revolves around its tough-as-nails hydroformed aluminum frame with 160mm of Fox suspension travel front and rear. A wide-range SRAM 1×10 drivetrain, Shimano hydraulic brakes (180mm rotors), and a tubeless-ready setup—what’s not to love? It’s dropper-post ready, has a stiff 142×12mm thru-axle rear end, and just plain rips trails apart. If you’re looking to enter the waters of go-anywhere, do-everything full suspension quiver killers, the Mission One is the starting point.
Diamondback's full-suspension models use their innovative Knuckle Box rear linkage. Designed as a single-pivot, four-bar suspension platform, this low and tight system delivers excellent pedaling efficiency with superb small-bump compliance and big-hit control.
Diamondback optimized the rear wheel rate to make the suspension linear at the beginning of the shock stroke and gradually increase to a more progressive rate. This results in superb small-bump compliance, more perceived travel, and excellent bottom-out protection.
Low Center of Gravity:
Low Leverage Suspension Design: Lower air pressure results in longer shock life, less frame loading and better pedaling.
Tight, Compact Linkage System:
Large Anodized Aluminum Hardware:
Pedals sold separately
|Frame||Mission All Mountain 27.5, 160mm 6061-T6 Weapons Grade Aluminum w/ Hydroformed Top Tube, Butted / Formed Down Tube / Seatstays, 1.5" Tapered Head Tube, Knuckle Box Technology, ISCG-05, 142x12mm E-Thru-axle Drop Out|
|Fork||Fox Float DPS, 3 Position Lever, "LV" Eyelet, 8.5x2.5 Air, w/ Rebound Adjust|
|Headset||FSA No-57E Taper 1.5 /1-1/8" Standard Cups, Sealed Cartridge|
|Rear Shock||Fox Float DPS, 3 Position Lever, "LV" Eyelet, 8.5x2.5 Air, w/ Rebound Adjust|
Front: 15mm thru-axle
Rear: 142x12mm thru-axle
|Rims/Wheels||Diamondback Blanchard 28R, Tubeless Compatible, 32h|
|Hubs||Alloy w/sealed cartridge bearings|
|Tires||WTB Vigilante Comp, 27.5 x 2.3|
|Chainrings||32T "Narrow Wide"|
|Bottom Bracket||Raceface Outboard Bearing|
|Chain||KMC X11EL, 11-Speed|
|Rear Derailleur||SRAM NX X-Horizon, 11-Speed|
|Cassette/Rear Cogs||SRAM PG1130, 11-Speed: 11-42|
|Shifters||SRAM NX 11 Speed X-Actuation Trigger|
|Handlebars||DB35 Alloy, 780mm Wide, 15mm Rise, 35mm Bar Bore|
|Tape/Grips||DB4L "Lock on" 135mm Kraton|
|Stem||DB35 Alloy, 50mm Reach, 35mm Bar Bore|
|Brake Levers||SRAM Level Hydraulic Levers w/ Tooled Reach Adjust|
|Brakes||SRAM Level T Hydraulic Disc, w/ 180mm Front/Rear Centerline Rotors|
|Pedals||DB4L Alloy Platform w/ Replaceable Pins|
|Saddle||WTB Volt Comp|
|Seat Post||DB Alloy Micro Adjust, 30.9mm|
|Accessories & Extras||DB Shock Pump, Tubless Valves, DB Torque Wrench w/ 3mm/ 4mm/ 5mm/ T25 Hex Bits, Diamondback Mud Guard, Extra Derailleur Hanger|