Filter By:
- Road (2)
- Mountain (1)
- Cyclocross (1)
- Commuter/Urban (2)
- Show More Sizes
- Show Fewer Sizes
Bikes
$529.00
New Soma Fog Cutter Frame
Endurance road disc frame that can fit tires up to 700x40mm.
- Fully heat-treated Tange Prestige CrMo steel
- Road sport geometry
- Rear rack & fender mounts
- International disc mounts (rear mount is located on the chainstay for stiffer performance and also keeps the caliper out of the way of rear racks)
- Available matching straight blade carbon fork (order 23316/43mm for frames 54cm and up; order 23317/48mm rake for frame 48-51cm
- 1-1/8" size headtube
- 27.2mm post size
- 6 sizes: 48, 51, 54, 56, 58, 61cm
- Rosso Red
Want a complete Fog Cutter?
Check out our "Pinchot" House gravel build.
$580.00 - $679.99
We've done hundreds of Wolverine custom builds in the past 5 years. Let's talk about yours--drop us a line or give us a shout.
The original inspiration for the Wolverine was “monster cross”, but it is seriously so much more. Its geometry is stable enough for off road touring, but sporty enough for all-around adventure. With its sliding dropouts, you can turn it into a single-speed CX bike. With a split seatstay, it is compatible with the Gates Carbon Belt Drive.
The primary differences between the V3 and V4 Type-B is that the latter has a third set of bottle bosses plus additional stack height on most sizes.There's also a new size, 46 cm.
Wolverine v.4 Type A is not belt-compatible. See chart for their differences. The Type-A also adopts modern standards such as 142mm rear thru-axle and a 44mm headtube that will fit 1-1/8 straight steerer or tapered steerer with the proper headset type.
There is NO frame break for Belt-Drive like the B-Type has. (See chart for other differences between A and B)
- Tange Prestige heat-treated CrMo tube set
- Clearance for 700x45c tires w/ fenders
- Rear hub spacing/type: 142 x12mm Thru-Axle
- IRD Broski sliding dropouts allow for geared or single-speed builds
- Optional Matching Fork: Unicrown straight blade 15mm thru-axle fork with cage bosses (1-1/8”)
(No lugged crown fork offered for the Type-A)
- Braze-ons for rear rack and fenders (disc brake-compatible racks only)
- Three sets of water bottle bosses
- 44mm headtube (Use ZS44/28.6-ZS44/30 headset for 1-1/8” steerers) (Use ZS44/28.6 -EC44/40 headsets for 1-1/8”-1-1/2” steerers)
- Sizes: 46, 50, 52, 54, 56, 58. 60, 62 and 66cm (We recommend 650b tires on the 46cm)
- 4.79 lbs (frame)
- Paint: Storm Blue
Type B features:
- Tange Prestige heat-treated CrMo front triangle; butted CrMo rear end
- Clearance for 700x45c tires w/ fenders
- Rear hub spacing:135mm (10mm QR, can be upgraded to 142mm 12mm TA with different inserts )
- Gates Carbon belt drive compatible
- IRD Broski sliding dropouts allow for geared or single-speed builds
Optional Matching Forks: A) lugged flat crown standard QR axle, Tange Infinity CrMo steel fork; double eyelets pannier rack and mini rack mounts. B) Unicrown straight blade 15mm thru-axle fork
- Braze-ons for rear rack and fenders (disc brake-compatible racks only)
- Three sets of water bottle bosses
- 1-1/8” size headtube
- Sizes: 46, 50, 52, 54, 56, 58. 60, 62 and 66cm (We recommend 650b tires on the 46cm)
- 4.79 lbs (frame);
- Paint: Moss Green
$599.95
The version 2.0 of the Riff offers practical updates in features and geometry without going all-in with progressive geometry that almost everyone in chasing. We wanted to keep this frame a hardtail that's great for bike packing and familiar-feeling on long days in the saddle on rolling terrain. There is a slightly steeper seat angle for more efficient climbing and shorter seat tubes to benefit dropper posts.
Tough Broski Sliding Dropouts allow you to run single-speed, geared or even hub gears. Rear hub spacing in updated to Boost 148 . A modified chainstay allows fitting even some double cranks with “plus size” 2.8? wide.
- ED coating inside frame and under the paint increase rust resistance
- Boost 148mm rear hub spacing
- Geometry is optimized for 120mm forks. Will work well with a 100mm fork, too.
- Tange Prestige heat-treated butted CrMo steel; butted CrMo rear end
- ISO disc brake tabs
- IRD Broski Sliding Dropouts
- S-bend seat stays and chainstays
- Rear rack and fender eyelets
- Dropper post cable routing runs on downtube and inside the seat tube
- 34.9mm seat collar(not included), 400mm post recommended
- CNC-machined 44mm headtube: Will fit 1-1/8" steerers with a ZeroStack 44 headset or fit tapered steerers with a ZS44 upper assembly and external cup (EC44) lower assembly
- Recommended tire size: 27.5 x 1.95" ‚Äi 2.8"
- Only the Large size frame comes with bottle mounts on the seat tube
- 5.7 lbs (XS)
Page 1 of 1